1,862 research outputs found
Robust massive MIMO Equilization for mmWave systems with low resolution ADCs
Leveraging the available millimeter wave spectrum will be important for 5G.
In this work, we investigate the performance of digital beamforming with low
resolution ADCs based on link level simulations including channel estimation,
MIMO equalization and channel decoding. We consider the recently agreed 3GPP NR
type 1 OFDM reference signals. The comparison shows sequential DCD outperforms
MMSE-based MIMO equalization both in terms of detection performance and
complexity. We also show that the DCD based algorithm is more robust to channel
estimation errors. In contrast to the common believe we also show that the
complexity of MMSE equalization for a massive MIMO system is not dominated by
the matrix inversion but by the computation of the Gram matrix.Comment: submitted to WCNC 2018 Workshop
Quantifying Potential Energy Efficiency Gain in Green Cellular Wireless Networks
Conventional cellular wireless networks were designed with the purpose of
providing high throughput for the user and high capacity for the service
provider, without any provisions of energy efficiency. As a result, these
networks have an enormous Carbon footprint. In this paper, we describe the
sources of the inefficiencies in such networks. First we present results of the
studies on how much Carbon footprint such networks generate. We also discuss
how much more mobile traffic is expected to increase so that this Carbon
footprint will even increase tremendously more. We then discuss specific
sources of inefficiency and potential sources of improvement at the physical
layer as well as at higher layers of the communication protocol hierarchy. In
particular, considering that most of the energy inefficiency in cellular
wireless networks is at the base stations, we discuss multi-tier networks and
point to the potential of exploiting mobility patterns in order to use base
station energy judiciously. We then investigate potential methods to reduce
this inefficiency and quantify their individual contributions. By a
consideration of the combination of all potential gains, we conclude that an
improvement in energy consumption in cellular wireless networks by two orders
of magnitude, or even more, is possible.Comment: arXiv admin note: text overlap with arXiv:1210.843
Large-Scale MIMO Detection for 3GPP LTE: Algorithms and FPGA Implementations
Large-scale (or massive) multiple-input multiple-output (MIMO) is expected to
be one of the key technologies in next-generation multi-user cellular systems,
based on the upcoming 3GPP LTE Release 12 standard, for example. In this work,
we propose - to the best of our knowledge - the first VLSI design enabling
high-throughput data detection in single-carrier frequency-division multiple
access (SC-FDMA)-based large-scale MIMO systems. We propose a new approximate
matrix inversion algorithm relying on a Neumann series expansion, which
substantially reduces the complexity of linear data detection. We analyze the
associated error, and we compare its performance and complexity to those of an
exact linear detector. We present corresponding VLSI architectures, which
perform exact and approximate soft-output detection for large-scale MIMO
systems with various antenna/user configurations. Reference implementation
results for a Xilinx Virtex-7 XC7VX980T FPGA show that our designs are able to
achieve more than 600 Mb/s for a 128 antenna, 8 user 3GPP LTE-based large-scale
MIMO system. We finally provide a performance/complexity trade-off comparison
using the presented FPGA designs, which reveals that the detector circuit of
choice is determined by the ratio between BS antennas and users, as well as the
desired error-rate performance.Comment: To appear in the IEEE Journal of Selected Topics in Signal Processin
Waveform Design for 5G and Beyond
5G is envisioned to improve major key performance indicators (KPIs), such as
peak data rate, spectral efficiency, power consumption, complexity, connection
density, latency, and mobility. This chapter aims to provide a complete picture
of the ongoing 5G waveform discussions and overviews the major candidates. It
provides a brief description of the waveform and reveals the 5G use cases and
waveform design requirements. The chapter presents the main features of cyclic
prefix-orthogonal frequency-division multiplexing (CP-OFDM) that is deployed in
4G LTE systems. CP-OFDM is the baseline of the 5G waveform discussions since
the performance of a new waveform is usually compared with it. The chapter
examines the essential characteristics of the major waveform candidates along
with the related advantages and disadvantages. It summarizes and compares the
key features of different waveforms.Comment: 22 pages, 21 figures, 2 tables; accepted version (The URL for the
final version:
https://onlinelibrary.wiley.com/doi/abs/10.1002/9781119333142.ch2
Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions
Massive MIMO is a compelling wireless access concept that relies on the use
of an excess number of base-station antennas, relative to the number of active
terminals. This technology is a main component of 5G New Radio (NR) and
addresses all important requirements of future wireless standards: a great
capacity increase, the support of many simultaneous users, and improvement in
energy efficiency. Massive MIMO requires the simultaneous processing of signals
from many antenna chains, and computational operations on large matrices. The
complexity of the digital processing has been viewed as a fundamental obstacle
to the feasibility of Massive MIMO in the past. Recent advances on
system-algorithm-hardware co-design have led to extremely energy-efficient
implementations. These exploit opportunities in deeply-scaled silicon
technologies and perform partly distributed processing to cope with the
bottlenecks encountered in the interconnection of many signals. For example,
prototype ASIC implementations have demonstrated zero-forcing precoding in real
time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing
of 8 terminals). Coarse and even error-prone digital processing in the antenna
paths permits a reduction of consumption with a factor of 2 to 5. This article
summarizes the fundamental technical contributions to efficient digital signal
processing for Massive MIMO. The opportunities and constraints on operating on
low-complexity RF and analog hardware chains are clarified. It illustrates how
terminals can benefit from improved energy efficiency. The status of technology
and real-life prototypes discussed. Open challenges and directions for future
research are suggested.Comment: submitted to IEEE transactions on signal processin
- …