36,916 research outputs found
Simplified immobilisation method for histidine-tagged enzymes in poly(methyl methacrylate) microfluidic devices
Article in press. Kulsharova, G., New BIOTECHNOLOGY (2017), https://doi.org/10.1016/j.nbt.2017.12.004Poly(methyl methacrylate) (PMMA) microfluidic devices have become promising platforms for a wide range of applications. Here we report a simple method for immobilising histidine-tagged enzymes suitable for PMMA microfluidic devices. The 1-step-immobilisation described is based on the affinity of the His-tag/Ni-NTA interaction and does not require prior amination of the PMMA surface, unlike many existing protocols. We compared it with a 3-step immobilisation protocol involving amination of PMMA and linking NTA via a glutaraldehyde cross-linker. These methods were applied to immobilise transketolase (TK) in PMMA microfluidic devices. Binding efficiency studies showed that about 15% of the supplied TK was bound using the 1-step method and about 26% of the enzyme was bound by the 3-step method. However, the TK-catalysed reaction producing l-erythrulose performed in microfluidic devices showed that specific activity of TK in the device utilising the 1-step immobilisation method was approximately 30% higher than that of its counterpart. Reusability of the microfluidic device produced via the 1-step method was tested for three cycles of enzymatic reaction and at least 85% of the initial productivity was maintained. The device could be operated for up to 40 h in a continuous flow and on average 70% of the initial productivity was maintained. The simplified immobilisation method required fewer chemicals and less time for preparation of the immobilised microfluidic device compared to the 3-step method while achieving higher specific enzyme activity. The method represents a promising approach for the development of immobilised enzymatic microfluidic devices and could potentially be applied to combine protein purification with immobilisation.Peer reviewe
Recommended from our members
Foot protein isoforms are expressed at different times during embryonic chick skeletal muscle development.
We have investigated the time course of expression of the alpha and beta triad junctional foot proteins in embryonic chick pectoral muscle. The level of [3H]ryanodine binding in muscle homogenates is low until day E20 of embryonic development, then increases dramatically at the time of hatching reaching adult levels by day N7 posthatch. The alpha and beta foot protein isoforms increase in abundance concomitantly with [3H]ryanodine binding. Using foot protein isoform-specific antibodies, the alpha foot protein is detected in a majority of fibers in day E10 muscle, while the beta isoform is first observed at low levels in a few fibers in day E15 muscle. A high molecular weight polypeptide, distinct from the alpha and beta proteins, is recognized by antifoot protein antibodies. This polypeptide is observed in day E8 muscle and declines in abundance with continued development. It appears to exist as a monomer and does not bind [3H]ryanodine. In contrast, the alpha isoform present in day E10 muscle and the beta isoform in day E20 muscle are oligomeric and bind [3H]ryanodine suggesting that they may exist as functional calcium channels in differentiating muscle. Comparison of the intracellular distributions of the alpha foot protein, f-actin, the heavy chain of myosin and titin in day E10 muscle indicates that the alpha foot protein is expressed during myofibril assembly and Z line formation. The differential expression of the foot protein isoforms in developing muscle, and their continued expression in mature muscle, is consistent with these proteins making different functional contributions. In addition, the expression of the alpha isoform during the time of organization of a differentiated muscle morphology suggests that foot proteins may participate in events involved in muscle differentiation
Microfluidically fabricated pH-responsive anionic amphiphilic microgels for drug release
© 2016 The Royal Society of Chemistry. Amphiphilic microgels of different composition based on the hydrophilic, pH-responsive acrylic acid (AA) and the hydrophobic, non-ionic n-butyl acrylate (BuA) were synthesised using a lab-on-a-chip device. Hydrophobic droplets were generated via a microfluidic platform that contained a protected form of AA, BuA, the hydrophobic crosslinker, ethylene glycol dimethacrylate (EGDMA), and a free radical initiator in an organic solvent. These hydrophobic droplets were photopolymerised within the microfluidic channels and subsequently hydrolysed, enabling an integrated platform for the rapid, automated, and in situ production of anionic amphiphilic microgels. The amphiphilic microgels did not feature the conventional core-shell structure but were instead based on random amphiphilic copolymers of AA and BuA and hydrophobic crosslinks. Due to their amphiphilic nature they were able to encapsulate and deliver both hydrophobic and hydrophilic moieties. The model drug delivery and the swelling ability of the microgels were influenced by the pH of the surrounding aqueous solution and the hydrophobic content of the microgels
Purification and Characterisation of a Pore Protein of the Outer Mitochondrial Membrane from Neurospora crassa
The major protein of the outer mitochondrial membrane of Neurospora was purified. On dodecylsulfate-containing gels it displayed a single bend with an apparent molecular weight of 31000. reconstitution experiments with artifical lipid bilayers showed that this protein forms pores. Pore conductance was dependent on the voltage across the membrane. The protein inserted into the membrane in an oriented fashion, the membrane current being dependent on the sign of the voltage. Single pore conductance was 5nS, suggesting a diameter of 2nm of the open pore. This mitochondrial protein shows a number of similarities to the outer membrane porins of gram-negative bacteria
Recommended from our members
Band-collision gel electrophoresis.
Electrophoretic mobility shift assays are widely used in gel electrophoresis to study binding interactions between different molecular species loaded into the same well. However, shift assays can access only a subset of reaction possibilities that could be otherwise seen if separate bands of reagent species might instead be collisionally reacted. Here, we adapt gel electrophoresis by fabricating two or more wells in the same lane, loading these wells with different reagent species, and applying an electric field, thereby producing collisional reactions between propagating pulse-like bands of these species, which we image optically. For certain pairs of anionic and cationic dyes, propagating bands pass through each other unperturbed; yet, for other pairs, we observe complexing and precipitation reactions, indicating strong attractive interactions. We generalize this band-collision gel electrophoresis (BCGE) approach to other reaction types, including acid-base, ligand exchange, and redox, as well as to colloidal species in passivated large-pore gels
Towards constructing one-bit binary adder in excitable chemical medium
Light-sensitive modification (ruthenium catalysed) of the
Belousov-Zhabotinsky medium exhibits various regimes of excitability depending
on the levels of illumination. For certain values of illumination the medium
switches to a sub-excitable mode. An asymmetric perturbation of the medium
leads to formation of a travelling localized excitation, a wave-fragment which
moves along a predetermined trajectory, ideally preserving its shape and
velocity. To implement collision-based computing with such wave-fragments we
represent values of Boolean variables in presence/absence of a wave-fragment at
specific sites of medium. When two wave-fragments collide they either
annihilate, or form new wave-fragments. The trajectories of the wave-fragments
after the collision represent a result of the computation, e.g. a simple
logical gate. Wave-fragments in the sub-excitable medium are famously difficult
to control. Therefore, we adopted a hybrid procedure in order to construct
collision-based logical gates: we used channels, defined by lower levels
illumination to subtly tune the shape of a propagating wave-fragment and allow
the wave-fragments to collide at the junctions between channels. Using this
methodology we were able to implement both in theoretical models (using the
Oregonator) and in experiment two interaction-based logical gates and assemble
the gates into a basic one-bit binary adder. We present the first ever
experimental approach towards constructing arithmetical circuits in
spatially-extended excitable chemical systems
Molecular motors robustly drive active gels to a critically connected state
Living systems often exhibit internal driving: active, molecular processes
drive nonequilibrium phenomena such as metabolism or migration. Active gels
constitute a fascinating class of internally driven matter, where molecular
motors exert localized stresses inside polymer networks. There is evidence that
network crosslinking is required to allow motors to induce macroscopic
contraction. Yet a quantitative understanding of how network connectivity
enables contraction is lacking. Here we show experimentally that myosin motors
contract crosslinked actin polymer networks to clusters with a scale-free size
distribution. This critical behavior occurs over an unexpectedly broad range of
crosslink concentrations. To understand this robustness, we develop a
quantitative model of contractile networks that takes into account network
restructuring: motors reduce connectivity by forcing crosslinks to unbind.
Paradoxically, to coordinate global contractions, motor activity should be low.
Otherwise, motors drive initially well-connected networks to a critical state
where ruptures form across the entire network.Comment: Main text: 21 pages, 5 figures. Supplementary Information: 13 pages,
8 figure
- …