Immunotronics - novel finite-state-machine architectures with built-in self-test using self-nonself differentiation

A novel approach to hardware fault tolerance is demonstrated that takes inspiration from the human immune system as a method of fault detection. The human immune system is a remarkable system of interacting cells and organs that protect the body from invasion and maintains reliable operation even in the presence of invading bacteria or viruses. This paper seeks to address the field of electronic hardware fault tolerance from an immunological perspective with the aim of showing how novel methods based upon the operation of the immune system can both complement and create new approaches to the development of fault detection mechanisms for reliable hardware systems. In particular, it is shown that by use of partial matching, as prevalent in biological systems, high fault coverage can be achieved with the added advantage of reducing memory requirements. The development of a generic finite-state-machine immunization procedure is discussed that allows any system that can be represented in such a manner to be "immunized" against the occurrence of faulty operation. This is demonstrated by the creation of an immunized decade counter that can detect the presence of faults in real tim

CA-BIST for asynchronous circuits: a case study on the RAPPID asynchronous instruction length decoder

Journal ArticleThis paper presents a case study in low-cost noninvasive Built-In Self Test (BIST) for RAPPID, a largescale 120,000-transistor asynchronous version of the Pentium® Pro Instruction Length Decoder, which runs at 3.6 GHz. RAPPID uses a synchronous 0.25 micron CMOS library for static and domino logic, and has no Design-for-Test hooks other than some debug features. We explore the use of Cellular Automata (CA) for on-chip test pattern generation and response evaluation. More specifically, we look for fast ways to tune the CA-BIST to the RAPPID design, rather than using pseudo-random testing. The metric for tuning the CA-BIST pattern generation is based on an abstract hardware description model of the instruction length decoder, which is independent of implementation details, and hence also independent of the asynchronous circuit style. Our CA-BI ST solution uses a novel bootstrap procedure for generating the test patterns, which give complete coverage for this metric, and cover 94% of the testable stuck-at faults for the actual design at switch level. Analysis of the undetected and untestable faults shows that the same fault effects can be expected for a similar clocked circuit. This is encouraging evidence that testability is no excuse to avoid asynchronous design techniques in addition to high-performance synchronous solutions

CA-BIST for asynchronous circuits: a case study on the RAPPID asynchronous instruction length decoder

Journal ArticleThis paper presents a case study in low-cost noninvasive Built-In Self Test (BIST) for RAPPID, a largescale 120,000-transistor asynchronous version of the Pentium® Pro Instruction Length Decoder, which runs at 3.6 GHz. RAPPID uses a synchronous 0.25 micron CMOS library for static and domino logic, and has no Design-for-Test hooks other than some debug features. We explore the use of Cellular Automata (CA) for on-chip test pattern generation and response evaluation. More specifically, we look for fast ways to tune the CA-BIST to the RAPPID design, rather than using pseudo-random testing. The metric for tuning the CA-BIST pattern generation is based on an abstract hardware description model of the instruction length decoder, which is independent of implementation details, and hence also independent of the asynchronous circuit style. Our CA-BI ST solution uses a novel bootstrap procedure for generating the test patterns, which give complete coverage for this metric, and cover 94% of the testable stuck-at faults for the actual design at switch level. Analysis of the undetected and untestable faults shows that the same fault effects can be expected for a similar clocked circuit. This is encouraging evidence that testability is no excuse to avoid asynchronous design techniques in addition to high-performance synchronous solutions

Fsimac: a fault simulator for asynchronous sequential circuits

Journal ArticleAt very high frequencies, the major potential of asynchronous circuits is absence of clock skew and, through that, better exploitation of relative timing relations. This paper presents Fsimac, a gate-level fault simulator for stuck-at and gate-delay faults in asynchronous sequential circuits. Fsimac not only evaluates combinational logic and typical asynchronous gates such as Muller C-elements, but also complex domino gates, which are widely used in high-speed designs. Our algorithm for detecting feedback loops is designed so as to minimize the iterations for simulating the unfolded circuit. We use min-max timing analysis to compute the bounds on the signal delays. Stuck-at faults are detected by comparing logic values at the primary outputs against the corresponding values in the fault-free design. For delay faults, we additionally compare min-max time stamps for primary output signals. Fault coverage reported by Fsimac for pseudo-random tests generated by Cellular Automata show some very good results, but also indicate test holes for which more specific patterns are needed. We intend to deploy Fsimac for designing more effective CA-BIST

From Microelectronics to Nanoelectronics: Introducing Nanotechnology to VLSI Curricula

© 2011 by ASEEIn the past decades, VLSI industries constantly shrank the size of transistors, so that more and more transistors can be built into the same chip area to make VLSI more and more powerful in its functions. As the typical feature size of CMOS VLSI is shrunk into deep submicron domain, nanotechnology is the next step in order to maintain Moore’s law for several more decades. Nanotechnology not only further improves the resolution in traditional photolithography process, but also introduces many brand-new fabrication strategies, such as bottom-up molecular self-assembly. Nanotechnology is also enabling many novel devices and circuit architectures which are totally different from current microelectronics circuits, such as quantum computing, nanowire crossbar circuits, spin electronics, etc. Nanotechnology is bringing another technology revolution to traditional CMOS VLSI technology. In order to train students to meet the quickly-increasing industry demand for nextgeneration nanoelectronics engineers, we are making efforts to introduce nanotechnology into our VLSI curricula. We have developed a series of VLSI curricula which include CPE/EE 448D - Introduction to VLSI, EE 548 - Low Power VLSI Circuit Design, EE 458 - Analog VLSI Circuit Design, EE 549 - VLSI Testing, etc. Furthermore, we developed a series of micro and nanotechnology related courses, such as EE 451 - Nanotechnology, EE 448 - Microelectronic Fabrication, EE 446 – MEMS (Microelectromechanical Systems). We introduce nanotechnology into our VLSI curricula, and teach the students about various devices, fabrication processes, circuit architectures, design and simulation skills for future nanotechnology-based nanoelectronic circuits. Some examples are nanowire crossbar circuit architecture, carbon-nanotube based nanotransistor, single-electron transistor, spintronics, quantum computing, bioelectronic circuits, etc. Students show intense interest in these exciting topics. Some students also choose nanoelectronics as the topic for their master project/thesis, and perform successful research in the field. The program has attracted many graduate students into the field of nanoelectronics

Power Droop Reduction In Logic BIST By Scan Chain Reordering

Significant peak power (PP), thus power droop (PD), during test is a serious concern for modern, complex ICs. In fact, the PD originated during the application of test vectors may produce a delay effect on the circuit under test signal transitions. This event may be erroneously recognized as presence of a delay fault, with consequent generation of an erroneous test fail, thus increasing yield loss. Several solutions have been proposed in the literature to reduce the PD during test of combinational ICs, while fewer approaches exist for sequential ICs. In this paper, we propose a novel approach to reduce peak power/power droop during test of sequential circuits with scan-based Logic BIST. In particular, our approach reduces the switching activity of the scan chains between following capture cycles. This is achieved by an original generation and arrangement of test vectors. The proposed approach presents a very low impact on fault coverage and test time

Multi-Cycle Test with Partial Observation on Scan-Based BIST Structure

Field test for reliability is usually performed with small amount of memory resource, and it requires a new technique which might be somewhat different from the conventional manufacturing tests. This paper proposes a novel technique that improves fault coverage or reduces the number of test vectors that is needed for achieving the given fault coverage on scan-based BIST structure. We evaluate a multi-cycle test method that observes the values of partial flip-flops on a chip during capture-mode. The experimental result shows that the partial observation achieves fault coverage improvement with small hardware overhead than the full observation.2011 Asian Test Symposium (ATS), 20-23 Nov. 2011, New Delhi, Indi

Complementary Sensory and Associative Microcircuitry in Primary Olfactory Cortex

The three-layered primary olfactory (piriform) cortex is the largest component of the olfactory cortex. Sensory and intracortical inputs converge on principal cells in the anterior piriform cortex (aPC).Wecharacterize organization principles of the sensory and intracortical microcircuitry of layer II and III principal cells in acute slices of rat aPC using laser-scanning photostimulation and fast two-photon population Ca²⁺ imaging. Layer II and III principal cells are set up on a superficial-to-deep vertical axis. We found that the position on this axis correlates with input resistance and bursting behavior. These parameters scale with distinct patterns of incorporation into sensory and associative microcircuits, resulting in a converse gradient of sensory and intracortical inputs. In layer II, sensory circuits dominate superficial cells, whereas incorporation in intracortical circuits increases with depth. Layer III pyramidal cells receive more intracortical inputs than layer II pyramidal cells, but with an asymmetric dorsal offset. This microcircuit organization results in a diverse hybrid feedforward/recurrent network of neurons integrating varying ratios of intracortical and sensory input depending on a cell’s position on the superficial-to-deep vertical axis. Since burstiness of spiking correlates with both the cell’s location on this axis and its incorporation in intracortical microcircuitry, the neuronal output mode may encode a given cell’s involvement in sensory versus associative processing

Power Minimisation Techniques for Testing Low Power VLSI Circuits (PhD Dissertation)

Testing low power very large scale integrated (VLSI) circuits has recently become an area of concern due to yield and reliability problems. This dissertation focuses on minimising power dissipation during test application at logic level and register-transfer level (RTL) of abstraction of the VLSI design flow. The first part of this dissertation addresses power minimisation techniques in scan sequential circuits at the logic level of abstraction. A new best primary input change (BPIC) technique based on a novel test application strategy has been proposed. The technique increases the correlation between successive states during shifting in test vectors and shifting out test responses by changing the primary inputs such that the smallest number of transitions is achieved. The new technique is test set dependent and it is applicable to small to medium sized full and partial scan sequential circuits. Since the proposed test application strategy depends only on controlling primary input change time, power is minimised with no penalty in test area, performance, test efficiency, test application time or volume of test data. Furthermore, it is shown that partial scan does not provide only the commonly known benefits such as less test area overhead and test application time, but also less power dissipation during test application when compared to full scan. To achieve power savings in large scan sequential circuits a new test set independent multiple scan chain-based technique which employs a new design for test (DFT) architecture and a novel test application strategy, is presented. The technique has been validated using benchmark examples, and it has been shown that power is minimised with low computational time, low overhead in test area and volume of test data, and with no penalty in test application time, test efficiency, or performance. The second part of this dissertation addresses power minimisation techniques for testing low power VLSI circuits using built-in self-test (BIST) at RTL. First, it is important to overcome the shortcomings associated with traditional BIST methodologies. It is shown how a new BIST methodology for RTL data paths using a novel concept called test compatibility classes (TCC) overcomes high test application time, BIST area overhead, performance degradation, volume of test data, fault-escape probability, and complexity of the testable design space exploration. Second, power minimisation in BIST RTL data paths is achieved by analysing the effect of test synthesis and test scheduling on power dissipation during test application and by employing new power conscious test synthesis and test scheduling algorithms. Third, the new BIST methodology has been validated using benchmark examples. Further, it is shown that when the proposed power conscious test synthesis and test scheduling is combined with novel test compatibility classes simultaneous reduction in test application time and power dissipation is achieved with low overhead in computational time