Simultaneous-Fault Diagnosis of Automotive Engine Ignition Systems Using Prior Domain Knowledge and Relevance Vector Machine

Engine ignition patterns can be analyzed to identify the engine fault according to both the specific prior domain knowledge and the shape features of the patterns. One of the challenges in ignition system diagnosis is that more than one fault may appear at a time. This kind of problem refers to simultaneous-fault diagnosis. Another challenge is the acquisition of a large amount of costly simultaneous-fault ignition patterns for constructing the diagnostic system because the number of the training patterns depends on the combination of different single faults. The above problems could be resolved by the proposed framework combining feature extraction, probabilistic classification, and decision threshold optimization. With the proposed framework, the features of the single faults in a simultaneous-fault pattern are extracted and then detected using a new probabilistic classifier, namely, pairwise coupling relevance vector machine, which is trained with single-fault patterns only. Therefore, the training dataset of simultaneous-fault patterns is not necessary. Experimental results show that the proposed framework performs well for both single-fault and simultaneous-fault diagnoses and is superior to the existing approach

Simultaneous-Fault Diagnosis of Gas Turbine Generator Systems Using a Pairwise-Coupled Probabilistic Classifier

A reliable fault diagnostic system for gas turbine generator system (GTGS), which is complicated and inherent with many types of component faults, is essential to avoid the interruption of electricity supply. However, the GTGS diagnosis faces challenges in terms of the existence of simultaneous-fault diagnosis and high cost in acquiring the exponentially increased simultaneous-fault vibration signals for constructing the diagnostic system. This research proposes a new diagnostic framework combining feature extraction, pairwise-coupled probabilistic classifier, and decision threshold optimization. The feature extraction module adopts wavelet packet transform and time-domain statistical features to extract vibration signal features. Kernel principal component analysis is then applied to further reduce the redundant features. The features of single faults in a simultaneous-fault pattern are extracted and then detected using a probabilistic classifier, namely, pairwise-coupled relevance vector machine, which is trained with single-fault patterns only. Therefore, the training dataset of simultaneous-fault patterns is unnecessary. To optimize the decision threshold, this research proposes to use grid search method which can ensure a global solution as compared with traditional computational intelligence techniques. Experimental results show that the proposed framework performs well for both single-fault and simultaneous-fault diagnosis and is superior to the frameworks without feature extraction and pairwise coupling

FAULT DETECTION AND PREDICTION IN ELECTROMECHANICAL SYSTEMS VIA THE DISCRETIZED STATE VECTOR-BASED PATTERN ANALYSIS OF MULTI-SENSOR SIGNALS

Department of System Design and Control EngineeringIn recent decades, operation and maintenance strategies for industrial applications have evolved from corrective maintenance and preventive maintenance, to condition-based monitoring and eventually predictive maintenance. High performance sensors and data logging technologies have enabled us to monitor the operational states of systems and predict fault occurrences. Several time series analysis methods have been proposed in the literature to classify system states via multi-sensor signals. Since the time series of sensor signals is often characterized as very-short, intermittent, transient, highly nonlinear, and non-stationary random signals, they make time series analyses more complex. Therefore, time series discretization has been popularly applied to extract meaningful features from original complex signals. There are several important issues to be addressed in discretization for fault detection and prediction: (i) What is the fault pattern that represents a system???s faulty states, (ii) How can we effectively search for fault patterns, (iii) What is a symptom pattern to predict fault occurrences, and (iv) What is a systematic procedure for online fault detection and prediction. In this regard, this study proposes a fault detection and prediction framework that consists of (i) definition of system???s operational states, (ii) definitions of fault and symptom patterns, (iii) multivariate discretization, (iv) severity and criticality analyses, and (v) online detection and prediction procedures. Given the time markers of fault occurrences, we can divide a system???s operational states into fault and no-fault states. We postulate that a symptom state precedes the occurrence of a fault within a certain time period and hence a no-fault state consists of normal and symptom states. Fault patterns are therefore found only in fault states, whereas symptom patterns are either only found in the system???s symptom states (being absent in the normal states) or not found in the given time series, but similar to fault patterns. To determine the length of a symptom state, we present a symptom pattern-based iterative search method. In order to identify the distinctive behaviors of multi-sensor signals, we propose a multivariate discretization approach that consists mainly of label definition, label specification, and event codification. Discretization parameters are delicately controlled by considering the key characteristics of multi-sensor signals. We discuss how to measure the severity degrees of fault and symptom patterns, and how to assess the criticalities of fault states. We apply the fault and symptom pattern extraction and severity assessment methods to online fault detection and prediction. Finally, we demonstrate the performance of the proposed framework through the following six case studies: abnormal cylinder temperature in a marine diesel engine, automotive gasoline engine knockings, laser weld defects, buzz, squeak, and rattle (BSR) noises from a car door trim (using a typical acoustic sensor array and using acoustic emission sensors respectively), and visual stimuli cognition tests by the P300 experiment.ope

Case Based Reasoning Support for Adaptive Finite Element Analysis - Mesh Selection for an Integrated System

An Adaptive Finite Element Analysis Integrated System supported through application of Case Based Reasoning (CBR) methodology is being proposed in this paper. The approach is fruitful for selection of an initial mesh from a library of solutions to initiate analysis process, as already tested optimal mesh will have lesser refinement iterations. The optimal mesh distribution, represented by object-oriented method, can be easily adapted to the topology of new problem in same domain. An integrated and universal structural analysis system models human reasoning by forming solutions through the retrieval and adaptation of successful strategies used in the past. Basic insight of two distinct subjects along with resolution of involved issues and integration strategy for development of an intelligent system is elaborated here. The research explains an algorithm for case retrieval and mesh generation procedures based on the principles of mapping method

COBE's search for structure in the Big Bang

The launch of Cosmic Background Explorer (COBE) and the definition of Earth Observing System (EOS) are two of the major events at NASA-Goddard. The three experiments contained in COBE (Differential Microwave Radiometer (DMR), Far Infrared Absolute Spectrophotometer (FIRAS), and Diffuse Infrared Background Experiment (DIRBE)) are very important in measuring the big bang. DMR measures the isotropy of the cosmic background (direction of the radiation). FIRAS looks at the spectrum over the whole sky, searching for deviations, and DIRBE operates in the infrared part of the spectrum gathering evidence of the earliest galaxy formation. By special techniques, the radiation coming from the solar system will be distinguished from that of extragalactic origin. Unique graphics will be used to represent the temperature of the emitting material. A cosmic event will be modeled of such importance that it will affect cosmological theory for generations to come. EOS will monitor changes in the Earth's geophysics during a whole solar color cycle

An Investigation into Vibration Based Techniques for Wind Turbine Blades Condition Monitoring

The rapid expansion of wind power has been accompanied by reported reliability problems and the aim is to provide a means of increasing wind turbine reliability, prevent break downs, increase availability and reduce maintenance costs and power outages. This research work reports the development of condition monitoring (CM) for early fault detection in wind turbine blades based on vibration measurements. The research started with a background and a survey of methods used for monitoring wind turbines. Then, finite element modelling (FEM) of three bladed horizontal axis wind turbine (HAWT) was developed to understand the nature and mechanism of the induced vibration. A HAWT test rig was constructed and equipped with computerised vibration measuring system for model verification. Statistical and spectral processing parameters then were used to analyse vibration signals that collected in healthy and faulty cases. Results obtained using time and frequency based techniques are not suitable for extracting blades condition related information. Consequently, empirical mode decomposition method (EMD), principal component analysis method (PCA) and continuous wavelet transform (CWT) are applied for extraction blade condition related features from the measured vibration. The result showed that although these methods generally proved their success in other fields, they have failed to detect small faults or changes in blade structure. Therefore, new techniques were developed using the above mentioned methods combined with feature intensity level (FIL) and crest factor. Namely, those are EDFIL, RMPCA and wavelet based FIL. The new techniques are found to be reliable, robust and sensitive to the severity of faults. Those analysis techniques are suitable to be the detection tool for an integrated wind turbine condition monitoring system. Directions for future work are also given at the end of the thesis

ReSCon '12, Research Student Conference: Book of Abstracts

The fifth SED Research Student Conference (ReSCon2012) was hosted over three days, 18-20 June 2012, in the Hamilton Centre at Brunel University. The conference consisted of 130 oral and 70 poster presentations, based on the high quality and diverse research being conducted within the School of Engineering and Design by postgraduate research students. The conference is held annually, and ReSCon plays a key role in contributing to research and innovations within the School

ESSE 2017. Proceedings of the International Conference on Environmental Science and Sustainable Energy

Environmental science is an interdisciplinary academic field that integrates physical-, biological-, and information sciences to study and solve environmental problems. ESSE - The International Conference on Environmental Science and Sustainable Energy provides a platform for experts, professionals, and researchers to share updated information and stimulate the communication with each other. In 2017 it was held in Suzhou, China June 23-25, 2017