8,246 research outputs found
Programmable rate modem utilizing digital signal processing techniques
The engineering development study to follow was written to address the need for a Programmable Rate Digital Satellite Modem capable of supporting both burst and continuous transmission modes with either binary phase shift keying (BPSK) or quadrature phase shift keying (QPSK) modulation. The preferred implementation technique is an all digital one which utilizes as much digital signal processing (DSP) as possible. Here design tradeoffs in each portion of the modulator and demodulator subsystem are outlined, and viable circuit approaches which are easily repeatable, have low implementation losses and have low production costs are identified. The research involved for this study was divided into nine technical papers, each addressing a significant region of concern in a variable rate modem design. Trivial portions and basic support logic designs surrounding the nine major modem blocks were omitted. In brief, the nine topic areas were: (1) Transmit Data Filtering; (2) Transmit Clock Generation; (3) Carrier Synthesizer; (4) Receive AGC; (5) Receive Data Filtering; (6) RF Oscillator Phase Noise; (7) Receive Carrier Selectivity; (8) Carrier Recovery; and (9) Timing Recovery
Phase ambiguity resolution for offset QPSK modulation systems
A demodulator for Offset Quaternary Phase Shift Keyed (OQPSK) signals modulated with two words resolves eight possible combinations of phase ambiguity which may produce data error by first processing received I(sub R) and Q(sub R) data in an integrated carrier loop/symbol synchronizer using a digital Costas loop with matched filters for correcting four of eight possible phase lock errors, and then the remaining four using a phase ambiguity resolver which detects the words to not only reverse the received I(sub R) and Q(sub R) data channels, but to also invert (complement) the I(sub R) and/or Q(sub R) data, or to at least complement the I(sub R) and Q(sub R) data for systems using nontransparent codes that do not have rotation direction ambiguity
Programmable rate modem utilizing digital signal processing techniques
The need for a Programmable Rate Digital Satellite Modem capable of supporting both burst and continuous transmission modes with either Binary Phase Shift Keying (BPSK) or Quadrature Phase Shift Keying (QPSK) modulation is discussed. The preferred implementation technique is an all digital one which utilizes as much digital signal processing (DSP) as possible. The design trade-offs in each portion of the modulator and demodulator subsystem are outlined
Digitally modulated bit error rate measurement system for microwave component evaluation
The NASA Lewis Research Center has developed a unique capability for evaluation of the microwave components of a digital communication system. This digitally modulated bit-error-rate (BER) measurement system (DMBERMS) features a continuous data digital BER test set, a data processor, a serial minimum shift keying (SMSK) modem, noise generation, and computer automation. Application of the DMBERMS has provided useful information for the evaluation of existing microwave components and of design goals for future components. The design and applications of this system for digitally modulated BER measurements are discussed
From Theory to Practice: Sub-Nyquist Sampling of Sparse Wideband Analog Signals
Conventional sub-Nyquist sampling methods for analog signals exploit prior
information about the spectral support. In this paper, we consider the
challenging problem of blind sub-Nyquist sampling of multiband signals, whose
unknown frequency support occupies only a small portion of a wide spectrum. Our
primary design goals are efficient hardware implementation and low
computational load on the supporting digital processing. We propose a system,
named the modulated wideband converter, which first multiplies the analog
signal by a bank of periodic waveforms. The product is then lowpass filtered
and sampled uniformly at a low rate, which is orders of magnitude smaller than
Nyquist. Perfect recovery from the proposed samples is achieved under certain
necessary and sufficient conditions. We also develop a digital architecture,
which allows either reconstruction of the analog input, or processing of any
band of interest at a low rate, that is, without interpolating to the high
Nyquist rate. Numerical simulations demonstrate many engineering aspects:
robustness to noise and mismodeling, potential hardware simplifications,
realtime performance for signals with time-varying support and stability to
quantization effects. We compare our system with two previous approaches:
periodic nonuniform sampling, which is bandwidth limited by existing hardware
devices, and the random demodulator, which is restricted to discrete multitone
signals and has a high computational load. In the broader context of Nyquist
sampling, our scheme has the potential to break through the bandwidth barrier
of state-of-the-art analog conversion technologies such as interleaved
converters.Comment: 17 pages, 12 figures, to appear in IEEE Journal of Selected Topics in
Signal Processing, the special issue on Compressed Sensin
IUS/payload communication system simulator configuration definition study
The requirements and specifications for a general purpose payload communications system simulator to be used to emulate those communications system portions of NASA and DOD payloads/spacecraft that will in the future be carried into earth orbit by the shuttle are discussed. For the purpose of on-orbit checkout, the shuttle is required to communicate with the payloads while they are physically located within the shuttle bay (attached) and within a range of 20 miles from the shuttle after they have been deployed (detached). Many of the payloads are also under development (and many have yet to be defined), actual payload communication hardware will not be available within the time frame during which the avionic hardware tests will be conducted. Thus, a flexible payload communication system simulator is required
Onboard multichannel demultiplexer/demodulator
An investigation performed for NASA LeRC by COMSAT Labs, of a digitally implemented on-board demultiplexer/demodulator able to process a mix of uplink carriers of differing bandwidths and center frequencies and programmable in orbit to accommodate variations in traffic flow is reported. The processor accepts high speed samples of the signal carried in a wideband satellite transponder channel, processes these as a composite to determine the signal spectrum, filters the result into individual channels that carry modulated carriers and demodulate these to recover their digital baseband content. The processor is implemented by using forward and inverse pipeline Fast Fourier Transformation techniques. The recovered carriers are then demodulated using a single digitally implemented demodulator that processes all of the modulated carriers. The effort has determined the feasibility of the concept with multiple TDMA carriers, identified critical path technologies, and assessed the potential of developing these technologies to a level capable of supporting a practical, cost effective on-board implementation. The result is a flexible, high speed, digitally implemented Fast Fourier Transform (FFT) bulk demultiplexer/demodulator
Phase-coherent lightwave communications with frequency combs
Fiber-optical networks are a crucial telecommunication infrastructure in
society. Wavelength division multiplexing allows for transmitting parallel data
streams over the fiber bandwidth, and coherent detection enables the use of
sophisticated modulation formats and electronic compensation of signal
impairments. In the future, optical frequency combs may replace multiple lasers
used for the different wavelength channels. We demonstrate two novel signal
processing schemes that take advantage of the broadband phase coherence of
optical frequency combs. This approach allows for a more efficient estimation
and compensation of optical phase noise in coherent communication systems,
which can significantly simplify the signal processing or increase the
transmission performance. With further advances in space division multiplexing
and chip-scale frequency comb sources, these findings pave the way for compact
energy-efficient optical transceivers.Comment: 17 pages, 9 figure
A Communication Monitor for Wireless Sensor Networks Based on Software Defined Radio
Link quality estimation of reliability-crucial wireless sensor networks (WSNs) is often limited by the observability and testability of single-chip radio transceivers. The estimation is often based on collection of packer-level statistics, including packet reception rate, or vendor-specific registers, such as CC2420's Received Signal Strength Indicator (RSSI) and Link Quality Indicator (LQI). The speed or accuracy of such metrics limits the performance of reliability mechanisms built in wireless sensor networks. To improve link quality estimation in WSNs, we designed a powerful wireless communication monitor based on Software Defined Radio (SDR). We studied the relations between three implemented link quality metrics and packet reception rate under different channel conditions. Based on a comparison of the metrics' relative advantages, we proposed using a combination of them for fast and accurate estimation of a sensor network link
- …