Logical topology design for IP rerouting: ASONs versus static OTNs

IP-based backbone networks are gradually moving to a network model consisting of high-speed routers that are flexibly interconnected by a mesh of light paths set up by an optical transport network that consists of wavelength division multiplexing (WDM) links and optical cross-connects. In such a model, the generalized MPLS protocol suite could provide the IP centric control plane component that will be used to deliver rapid and dynamic circuit provisioning of end-to-end optical light paths between the routers. This is called an automatic switched optical (transport) network (ASON). An ASON enables reconfiguration of the logical IP topology by setting up and tearing down light paths. This allows to up- or downgrade link capacities during a router failure to the capacities needed by the new routing of the affected traffic. Such survivability against (single) IP router failures is cost-effective, as capacity to the IP layer can be provided flexibly when necessary. We present and investigate a logical topology optimization problem that minimizes the total amount or cost of the needed resources (interfaces, wavelengths, WDM line-systems, amplifiers, etc.) in both the IP and the optical layer. A novel optimization aspect in this problem is the possibility, as a result of the ASON, to reuse the physical resources (like interface cards and WDM line-systems) over the different network states (the failure-free and all the router failure scenarios). We devised a simple optimization strategy to investigate the cost of the ASON approach and compare it with other schemes that survive single router failures

Dimensioning of an European backbone network in OPNET WDM Guru

C

Energy-efficient traffic engineering

The energy consumption in telecommunication networks is expected to grow considerably, especially in core networks. In this chapter, optimization of energy consumption is approached from two directions. In a first study, multilayer traffic engineering (MLTE) is used to assign energy-efficient paths and logical topology to IP traffic. The relation with traditional capacity optimization is explained, and the MLTE strategy is applied for daily traffic variations. A second study considers the core network below the IP layer, giving a detailed power consumption model. Optical bypass is evaluated as a technique to achieve considerable power savings over per-hop opticalelectronicoptical regeneration. Document type: Part of book or chapter of boo

IDEALIST control and service management solutions for dynamic and adaptive flexi-grid DWDM networks

Wavelength Switched Optical Networks (WSON) were designed with the premise that all channels in a network have the same spectrum needs, based on the ITU-T DWDM grid. However, this rigid grid-based approach is not adapted to the spectrum requirements of the signals that are best candidates for long-reach transmission and high-speed data rates of 400Gbps and beyond. An innovative approach is to evolve the fixed DWDM grid to a flexible grid, in which the optical spectrum is partitioned into fixed-sized spectrum slices. This allows facilitating the required amount of optical bandwidth and spectrum for an elastic optical connection to be dynamically and adaptively allocated by assigning the necessary number of slices of spectrum. The ICT IDEALIST project will provide the architectural design, protocol specification, implementation, evaluation and standardization of a control plane and a network and service management system. This architecture and tools are necessary to introduce dynamicity, elasticity and adaptation in flexi-grid DWDM networks. This paper provides an overview of the objectives, framework, functional requirements and use cases of the elastic control plane and the adaptive network and service management system targeted in the ICT IDEALIST project

Resource allocation in disaggregated optical networks

The recently introduced disaggregation model is gaining interest due to its benefits when compared with traditional models.In essence, it consists on the separation of traditional hardware appliances (e.g. servers, network nodes) into commodity components, which then are mounted independently for their exploitation into customized physical infrastructures. Such an approach allows telecommunication operators and service providers to appropriately size their infrastructure and grow as needed. One of the main key benefits of the disaggregation model is the break of the vendor lock-in, pushing towards interoperability between equipment from different vendor with minimum standardization of software and hardware specifications, allowing operators to build the best solutions for their needs. Moreover, efficient scaling is also an important benefit introduced by the disaggregation approach. Due to these benefits, among others, the disaggregation model is gaining momentum and is being adopted into multiple fields and domains of nowadays telecom infrastructures. In this regard, the scenario under study of this master thesis focuses on disaggregated optical transport networks. Disaggregation allows for more open and customized optical networks, reducing both capital and operational expenditures for infrastructure owners.However, despite of these positive aspects, disaggregated optical networks face several challenges, beingthe degradation of the network performance when compared to traditional integrated solutions the most important one. In this regard, this thesis investigates the impact of disaggregation in optical networks and investigates regeneration as a potential solution to compensate the performances’ degradation. Under this premise, optimal solutions for regenerator placement, exploiting the inherent grooming capabilities of regenerators, are proposed and evaluatedIncomin

A survey on OFDM-based elastic core optical networking

Orthogonal frequency-division multiplexing (OFDM) is a modulation technology that has been widely adopted in many new and emerging broadband wireless and wireline communication systems. Due to its capability to transmit a high-speed data stream using multiple spectral-overlapped lower-speed subcarriers, OFDM technology offers superior advantages of high spectrum efficiency, robustness against inter-carrier and inter-symbol interference, adaptability to server channel conditions, etc. In recent years, there have been intensive studies on optical OFDM (O-OFDM) transmission technologies, and it is considered a promising technology for future ultra-high-speed optical transmission. Based on O-OFDM technology, a novel elastic optical network architecture with immense flexibility and scalability in spectrum allocation and data rate accommodation could be built to support diverse services and the rapid growth of Internet traffic in the future. In this paper, we present a comprehensive survey on OFDM-based elastic optical network technologies, including basic principles of OFDM, O-OFDM technologies, the architectures of OFDM-based elastic core optical networks, and related key enabling technologies. The main advantages and issues of OFDM-based elastic core optical networks that are under research are also discussed

Next-Generation Transport Networks Leveraging Universal Traffic Switching and Flexible Optical Transponders

Recent developments in communication technology contributed to the growth of network traffic exponentially. Cost per bit has to necessarily suffer an inverse trend, posing several challenges to network operators. Optical transport networks are no exception to this. On one hand, they have to keep up with the expectations of data speed, volume, and growth at the agreed quality-of-service (QoS), while on the other hand, a steep downward trend of the cost per bit is a matter of concern. Thus, the proper selection of network architecture, technology, resiliency schemes, and traffic handling contributes to the total cost of ownership (TCO). In this context, this chapter looks into the network architectures, including the optical transport network (OTN) switch (both traditional and universal), resiliency schemes (protection and restoration), flexible-rate line interfaces, and an overall strategy of handover in between metro and core networks. A design framework is also described and used to support the case studies reported in this chapter