2,135 research outputs found
Network Code Design for Orthogonal Two-hop Network with Broadcasting Relay: A Joint Source-Channel-Network Coding Approach
This paper addresses network code design for robust transmission of sources
over an orthogonal two-hop wireless network with a broadcasting relay. The
network consists of multiple sources and destinations in which each
destination, benefiting the relay signal, intends to decode a subset of the
sources. Two special instances of this network are orthogonal broadcast relay
channel and the orthogonal multiple access relay channel. The focus is on
complexity constrained scenarios, e.g., for wireless sensor networks, where
channel coding is practically imperfect. Taking a source-channel and network
coding approach, we design the network code (mapping) at the relay such that
the average reconstruction distortion at the destinations is minimized. To this
end, by decomposing the distortion into its components, an efficient design
algorithm is proposed. The resulting network code is nonlinear and
substantially outperforms the best performing linear network code. A motivating
formulation of a family of structured nonlinear network codes is also
presented. Numerical results and comparison with linear network coding at the
relay and the corresponding distortion-power bound demonstrate the
effectiveness of the proposed schemes and a promising research direction.Comment: 27 pages, 9 figures, Submited to IEEE Transaction on Communicatio
On Two-Pair Two-Way Relay Channel with an Intermittently Available Relay
When multiple users share the same resource for physical layer cooperation
such as relay terminals in their vicinities, this shared resource may not be
always available for every user, and it is critical for transmitting terminals
to know whether other users have access to that common resource in order to
better utilize it. Failing to learn this critical piece of information may
cause severe issues in the design of such cooperative systems. In this paper,
we address this problem by investigating a two-pair two-way relay channel with
an intermittently available relay. In the model, each pair of users need to
exchange their messages within their own pair via the shared relay. The shared
relay, however, is only intermittently available for the users to access. The
accessing activities of different pairs of users are governed by independent
Bernoulli random processes. Our main contribution is the characterization of
the capacity region to within a bounded gap in a symmetric setting, for both
delayed and instantaneous state information at transmitters. An interesting
observation is that the bottleneck for information flow is the quality of state
information (delayed or instantaneous) available at the relay, not those at the
end users. To the best of our knowledge, our work is the first result regarding
how the shared intermittent relay should cooperate with multiple pairs of users
in such a two-way cooperative network.Comment: extended version of ISIT 2015 pape
Self-concatenated code design and its application in power-efficient cooperative communications
In this tutorial, we have focused on the design of binary self-concatenated coding schemes with the help of EXtrinsic Information Transfer (EXIT) charts and Union bound analysis. The design methodology of future iteratively decoded self-concatenated aided cooperative communication schemes is presented. In doing so, we will identify the most important milestones in the area of channel coding, concatenated coding schemes and cooperative communication systems till date and suggest future research directions
On the Design of a Novel Joint Network-Channel Coding Scheme for the Multiple Access Relay Channel
This paper proposes a novel joint non-binary network-channel code for the
Time-Division Decode-and-Forward Multiple Access Relay Channel (TD-DF-MARC),
where the relay linearly combines -- over a non-binary finite field -- the
coded sequences from the source nodes. A method based on an EXIT chart analysis
is derived for selecting the best coefficients of the linear combination.
Moreover, it is shown that for different setups of the system, different
coefficients should be chosen in order to improve the performance. This
conclusion contrasts with previous works where a random selection was
considered. Monte Carlo simulations show that the proposed scheme outperforms,
in terms of its gap to the outage probabilities, the previously published joint
network-channel coding approaches. Besides, this gain is achieved by using very
short-length codewords, which makes the scheme particularly attractive for
low-latency applications.Comment: 28 pages, 9 figures; Submitted to IEEE Journal on Selected Areas in
Communications - Special Issue on Theories and Methods for Advanced Wireless
Relays, 201
Reliable Physical Layer Network Coding
When two or more users in a wireless network transmit simultaneously, their
electromagnetic signals are linearly superimposed on the channel. As a result,
a receiver that is interested in one of these signals sees the others as
unwanted interference. This property of the wireless medium is typically viewed
as a hindrance to reliable communication over a network. However, using a
recently developed coding strategy, interference can in fact be harnessed for
network coding. In a wired network, (linear) network coding refers to each
intermediate node taking its received packets, computing a linear combination
over a finite field, and forwarding the outcome towards the destinations. Then,
given an appropriate set of linear combinations, a destination can solve for
its desired packets. For certain topologies, this strategy can attain
significantly higher throughputs over routing-based strategies. Reliable
physical layer network coding takes this idea one step further: using
judiciously chosen linear error-correcting codes, intermediate nodes in a
wireless network can directly recover linear combinations of the packets from
the observed noisy superpositions of transmitted signals. Starting with some
simple examples, this survey explores the core ideas behind this new technique
and the possibilities it offers for communication over interference-limited
wireless networks.Comment: 19 pages, 14 figures, survey paper to appear in Proceedings of the
IEE
Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey
This paper provides a comprehensive review of the domain of physical layer
security in multiuser wireless networks. The essential premise of
physical-layer security is to enable the exchange of confidential messages over
a wireless medium in the presence of unauthorized eavesdroppers without relying
on higher-layer encryption. This can be achieved primarily in two ways: without
the need for a secret key by intelligently designing transmit coding
strategies, or by exploiting the wireless communication medium to develop
secret keys over public channels. The survey begins with an overview of the
foundations dating back to the pioneering work of Shannon and Wyner on
information-theoretic security. We then describe the evolution of secure
transmission strategies from point-to-point channels to multiple-antenna
systems, followed by generalizations to multiuser broadcast, multiple-access,
interference, and relay networks. Secret-key generation and establishment
protocols based on physical layer mechanisms are subsequently covered.
Approaches for secrecy based on channel coding design are then examined, along
with a description of inter-disciplinary approaches based on game theory and
stochastic geometry. The associated problem of physical-layer message
authentication is also introduced briefly. The survey concludes with
observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with
arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials,
201
- …