On the performance of hybrid beamforming for millimeter wave wireless networks

The phenomenal growth in the demand for mobile wireless data services is pushing the boundaries of modern communication networks. Developing new technologies that can provide unprecedented data rates to support the pervasive and exponentially increasing demand is therefore of prime importance in wireless communications. In existing communication systems, physical layer techniques are commonly used to improve capacity. Nevertheless, the limited available resources in the spectrum are unable to scale up, fundamentally restricting further capacity increase. Consequently, alternative approaches which exploit both unused and underutilised spectrum bands are highly attractive. This thesis investigates the use of the millimeter wave (mmWave) spectrum as it has the potential to provide unlimited bandwidth to wireless communication systems. As a first step toward realising mmWave wireless communications, a cloud radio access network using mmWave technology in the fronthaul and access links is proposed to establish a feasible architecture for deploying mmWave systems with hybrid beamforming. Within the context of a multi-user communication system, an analytical framework of the downlink transmission is presented, providing insights on how to navigate across the challenges associated with high-frequency transmissions. The performance of each user is measured by deriving outage probability, average latency and throughput in both noise-limited and interference-limited scenarios. Further analysis of the system is carried out for two possible user association configurations. By relying on large antenna array deployment in highly dense networks, this architecture is able to achieve reduced outages with very low latencies, making it ideal to support a growing number of users. The second part of this work describes a novel two-stage optimisation algorithm for obtaining hybrid precoders and combiners that maximise the energy efficiency (EE) of a general multi-user mmWave multiple-input, multiple-output (MIMO) interference channel network involving internet of things (IoT) devices. The hybrid transceiver design problem considers both perfect and imperfect channel state information (CSI). In the first stage, the original non-convex multivariate EE maximization problem is transformed into an equivalent univariate problem and the optimal single beamformers are then obtained by exploiting the correlation between parametric and fractional programming problems and the relationship between weighted sum rate (WSR) and weighted minimum mean squared error (WMMSE) problems. The second stage involves the use of an orthogonal matching pursuit (OMP)-based algorithm to obtain the energy-efficient hybrid beamformers. This approach produces results comparable to the optimal beam-forming strategy but with much lower complexity, and further validates the use of mmWave networks in practice to support the demand from ubiquitous power-constrained smart devices. In the third part, the focus is on the more practical scenario of imperfect CSI for multi-user mmWave systems. Following the success of hybrid beamforming for mmWave wireless communication, a non-traditional transmission strategy called Rate Splitting (RS) is investigated in conjunction with hybrid beamforming to tackle the residual multi-user interference (MUI) caused by errors in the estimated channel. Using this technique, the transmitted signal is split into a common message and a private message with the transmitted power dynamically divided between the two parts to ensure that there is interference-free transmission of the common message. An alternating maximisation algorithm is proposed to obtain the optimal common precoder. Simulation results show that the RS transmission scheme is beneficial to multi-user mmWave transmissions as it enables remarkable rate gains over the traditional linear transmission methods. Finally, the fourth part analyses the spectral efficiency (SE) performance of a mmWave system with hybrid beamforming whilst accounting for real-life practice transceiver hardware impairments. An investigation is conducted into three major hardware impairments, namely, the multiplicative phase noise (PN), the amplified thermal noise (ATN) and the residual additive transceiver hardware impairments (RATHI). The hybrid precoder is designed to maximise the SE by the minimisation of the Euclidean distance between the optimal digital precoder and the noisy product of the hybrid precoders while the hybrid combiners are designed by the minimisation of the mean square error (MSE) between the transmitted and received signals. Multiplicative PN was found to be the most critical of the three impairments considered. It was observed that the additive impairments could be neglected for low signal-to-noise-ratio (SNR) while the ATNs caused a steady degradation to the SE performance

Millimeter Wave Systems for Wireless Cellular Communications

This thesis considers channel estimation and multiuser (MU) data transmission for massive MIMO systems with fully digital/hybrid structures in mmWave channels. It contains three main contributions. In this thesis, we first propose a tone-based linear search algorithm to facilitate the estimation of angle-of-arrivals of the strongest components as well as scattering components of the users at the base station (BS) with fully digital structure. Our results show that the proposed maximum-ratio transmission (MRT) based on the strongest components can achieve a higher data rate than that of the conventional MRT, under the same mean squared errors (MSE). Second, we develop a low-complexity channel estimation and beamformer/precoder design scheme for hybrid mmWave systems. In addition, the proposed scheme applies to both non-sparse and sparse mmWave channel environments. We then leverage the proposed scheme to investigate the downlink achievable rate performance. The results show that the proposed scheme obtains a considerable achievable rate of fully digital systems. Taking into account the effect of various types of errors, we investigate the achievable rate performance degradation of the considered scheme. Third, we extend our proposed scheme to a multi-cell MU mmWave MIMO network. We derive the closed-form approximation of the normalized MSE of channel estimation under pilot contamination over Rician fading channels. Furthermore, we derive a tight closed-form approximation and the scaling law of the average achievable rate. Our results unveil that channel estimation errors, the intra-cell interference, and the inter-cell interference caused by pilot contamination over Rician fading channels can be efficiently mitigated by simply increasing the number of antennas equipped at the desired BS.Comment: Thesi

Rate-Splitting Multiple Access for 6G Networks: Ten Promising Scenarios and Applications

In the upcoming 6G era, multiple access (MA) will play an essential role in achieving high throughput performances required in a wide range of wireless applications. Since MA and interference management are closely related issues, the conventional MA techniques are limited in that they cannot provide near-optimal performance in universal interference regimes. Recently, rate-splitting multiple access (RSMA) has been gaining much attention. RSMA splits an individual message into two parts: a common part, decodable by every user, and a private part, decodable only by the intended user. Each user first decodes the common message and then decodes its private message by applying successive interference cancellation (SIC). By doing so, RSMA not only embraces the existing MA techniques as special cases but also provides significant performance gains by efficiently mitigating inter-user interference in a broad range of interference regimes. In this article, we first present the theoretical foundation of RSMA. Subsequently, we put forth four key benefits of RSMA: spectral efficiency, robustness, scalability, and flexibility. Upon this, we describe how RSMA can enable ten promising scenarios and applications along with future research directions to pave the way for 6G.Comment: 17 pages, 6 figures, submitted to IEEE Network Magazin

Future cellular systems: fundamentals and the role of large antenna arrays

In this thesis, we analyze the performance of three promising technologies being considered for future fifth generation (5G) and beyond wireless communication systems, with primary goals to: i) render 10-100 times higher user data rate, ii) serve 10-100 times more users simultaneously, iii) 1000 times more data volume per unit area, iv) improve energy efficiency on the order of 100 times, and iv) provide higher bandwidths. Accordingly, we focus on massive multiple-input multiple-output (MIMO) systems and other future wireless technologies, namely millimeter wave (mmWave) and full-duplex (FD) systems that are being considered to fulfill the above requirements. We begin by focusing on fundamental performance limits of massive MIMO systems under practical constraints such as low complexity processing, array size and limited physical space. First, we analyze the performance of a massive MIMO base station (BS) serving spatially distributed multi-antenna users within a fixed coverage area. Stochastic geometry is used to characterize the spatially distributed users while large dimensional random matrix theory is used to achieve deterministic approximations of the sum rate of the system. We then examine the deployment of a massive MIMO BS and the resulting energy efficiency (EE) by considering a more realistic set-up of a rectangular array with increasing antenna elements within a fixed physical space. The effects of mutual coupling and correlation among the BS antennas are incorporated by deriving a practical mutual coupling matrix which considers coupling among all antenna elements within the BS. Accordingly, the optimum number of antennas that can be deployed for a particular antenna spacing when EE is considered as a design criteria is derived. Also, it is found that mutual coupling effect reduces the EE of the massive system by around 40-45% depending on the precoder/receiver used and the physical space available for antenna deployment. After establishing the constraints of antenna spacing on massive MIMO systems for the current microwave spectrum, we shift our focus to mmWave frequencies (more than 100GHz available bandwidth), where the wavelength is very small and as a result more antennas can be rigged within a constrained space. Accordingly, we integrate the massive MIMO technology with mmWave networks. In particular, we analyze the performance of a mmWave network consisting of spatially distributed BS equipped with very large uniform circular arrays (UCA) serving spatially distributed users within a fixed coverage area. The use of UCA is due to its capability of scanning through both the azimuth as well as elevation dimensions. We show that using such 3D massive MIMO techniques in mmWave systems yield significant performance gains. Further, we show the effect of blockages and path loss on mmWave networks. Since blockages are found to be quite detrimental to mmWave networks, we create alternative propagation paths with the aid of relays. In particular, we consider the deployment of relays in outdoor mmWave networks and then derive expressions for the coverage probability and transmission capacity from sources to a destination for such relay aided mmWave networks using stochastic geometric tools. Overall, relay aided mmWave transmission is seen to improve the signal to noise ratio at the destination by around 5-10dB with respect to specific coverage probabilities. Finally, due to the fact that the current half duplex (HD) mode transmission only utilizes half the spectrum at the same time in the same frequency, we consider a multiuser MIMO cellular system, where a FD BS serves multiple HD users simultaneously. However, since FD systems are plagued by severe self-interference (SI), we focus on the design of robust transceivers, which can cancel the residual SI left after antenna and analog cancellations. In particular, we address the sum mean-squared-errors (MSE) minimization problem by transforming it into an equivalent semidefinite programming (SDP) problem. We propose iterative alternating algorithms to design the transceiver matrices jointly and accordingly show the gains of FD over HD systems. We show that with proper SI cancellation, it is possible to achieve gains on sum rate of up to 70-80% over HD systems

Rate-Splitting to Mitigate Residual Transceiver Hardware Impairments in Massive MIMO Systems

Rate-Splitting (RS) has recently been shown to provide significant performance benefits in various multi-user transmission scenarios. In parallel, the huge degrees-of-freedom provided by the appealing massive Multiple-Input Multiple-Output (MIMO) necessitate the employment of inexpensive hardware, being more prone to hardware imperfections, in order to be a cost-efficient technology. Hence, in this work, we focus on a realistic massive Multiple-Input Single-Output (MISO) Broadcast Channel (BC) hampered by the inevitable hardware impairments. We consider a general experimentally validated model of hardware impairments, accounting for the presence of \textit{multiplicative distortion} due to phase noise, \textit{additive distortion noise} and \textit{thermal noise amplification}. Under both scenarios with perfect and imperfect channel state information at the transmitter (CSIT), we analyze the potential robustness of RS to each separate hardware imperfection. We analytically assess the sum-rate degradation due to hardware imperfections. Interestingly, in the case of imperfect CSIT, we demonstrate that RS is a robust strategy for multiuser MIMO in the presence of phase and amplified thermal noise, since its sum-rate does not saturate at high signal-to-noise ratio (SNR), contrary to conventional techniques. On the other hand, the additive impairments always lead to a sum-rate saturation at high SNR, even after the application of RS. However, RS still enhances the performance. Furthermore, as the number of users increases, the gains provided by RS decrease not only in ideal conditions, but in practical conditions with RTHIs as well.Comment: accepted in IEEE TVT. arXiv admin note: text overlap with arXiv:1702.0116

System capacity enhancement for 5G network and beyond

A thesis submitted to the University of Bedfordshire, in fulfilment of the requirements for the degree of Doctor of PhilosophyThe demand for wireless digital data is dramatically increasing year over year. Wireless communication systems like Laptops, Smart phones, Tablets, Smart watch, Virtual Reality devices and so on are becoming an important part of people’s daily life. The number of mobile devices is increasing at a very fast speed as well as the requirements for mobile devices such as super high-resolution image/video, fast download speed, very short latency and high reliability, which raise challenges to the existing wireless communication networks. Unlike the previous four generation communication networks, the fifth-generation (5G) wireless communication network includes many technologies such as millimetre-wave communication, massive multiple-input multiple-output (MIMO), visual light communication (VLC), heterogeneous network (HetNet) and so forth. Although 5G has not been standardised yet, these above technologies have been studied in both academia and industry and the goal of the research is to enhance and improve the system capacity for 5G networks and beyond by studying some key problems and providing some effective solutions existing in the above technologies from system implementation and hardware impairments’ perspective. The key problems studied in this thesis include interference cancellation in HetNet, impairments calibration for massive MIMO, channel state estimation for VLC, and low latency parallel Turbo decoding technique. Firstly, inter-cell interference in HetNet is studied and a cell specific reference signal (CRS) interference cancellation method is proposed to mitigate the performance degrade in enhanced inter-cell interference coordination (eICIC). This method takes carrier frequency offset (CFO) and timing offset (TO) of the user’s received signal into account. By reconstructing the interfering signal and cancelling it afterwards, the capacity of HetNet is enhanced. Secondly, for massive MIMO systems, the radio frequency (RF) impairments of the hardware will degrade the beamforming performance. When operated in time duplex division (TDD) mode, a massive MIMO system relies on the reciprocity of the channel which can be broken by the transmitter and receiver RF impairments. Impairments calibration has been studied and a closed-loop reciprocity calibration method is proposed in this thesis. A test device (TD) is introduced in this calibration method that can estimate the transmitters’ impairments over-the-air and feed the results back to the base station via the Internet. The uplink pilots sent by the TD can assist the BS receivers’ impairment estimation. With both the uplink and downlink impairments estimates, the reciprocity calibration coefficients can be obtained. By computer simulation and lab experiment, the performance of the proposed method is evaluated. Channel coding is an essential part of a wireless communication system which helps fight with noise and get correct information delivery. Turbo codes is one of the most reliable codes that has been used in many standards such as WiMAX and LTE. However, the decoding process of turbo codes is time-consuming and the decoding latency should be improved to meet the requirement of the future network. A reverse interleave address generator is proposed that can reduce the decoding time and a low latency parallel turbo decoder has been implemented on a FPGA platform. The simulation and experiment results prove the effectiveness of the address generator and show that there is a trade-off between latency and throughput with a limited hardware resource. Apart from the above contributions, this thesis also investigated multi-user precoding for MIMO VLC systems. As a green and secure technology, VLC is achieving more and more attention and could become a part of 5G network especially for indoor communication. For indoor scenario, the MIMO VLC channel could be easily ill-conditioned. Hence, it is important to study the impact of the channel state to the precoding performance. A channel state estimation method is proposed based on the signal to interference noise ratio (SINR) of the users’ received signal. Simulation results show that it can enhance the capacity of the indoor MIMO VLC system