Power Reductions with Energy Recovery Using Resonant Topologies

The problem of power densities in system-on-chips (SoCs) and processors has become more exacerbated recently, resulting in high cooling costs and reliability issues. One of the largest components of power consumption is the low skew clock distribution network (CDN), driving large load capacitance. This can consume as much as 70% of the total dynamic power that is lost as heat, needing elaborate sensing and cooling mechanisms. To mitigate this, resonant clocking has been utilized in several applications over the past decade. An improved energy recovering reconfigurable generalized series resonance (GSR) solution with all the critical support circuitry is developed in this work. This LC resonant clock driver is shown to save about 50% driver power (\u3e40% overall), on a 22nm process node and has 50% less skew than a non-resonant driver at 2GHz. It can operate down to 0.2GHz to support other energy savings techniques like dynamic voltage and frequency scaling (DVFS). As an example, GSR can be configured for the simpler pulse series resonance (PSR) operation to enable further power saving for double data rate (DDR) applications, by using de-skewing latches instead of flip-flop banks. A PSR based subsystem for 40% savings in clocking power with 40% driver active area reduction xii is demonstrated. This new resonant driver generates tracking pulses at each transition of clock for dual edge operation across DVFS. PSR clocking is designed to drive explicit-pulsed latches with negative setup time. Simulations using 45nm IBM/PTM device and interconnect technology models, clocking 1024 flip-flops show the reductions, compared to non-resonant clocking. DVFS range from 2GHz/1.3V to 200MHz/0.5V is obtained. The PSR frequency is set \u3e3× the clock rate, needing only 1/10th the inductance of prior-art LC resonance schemes. The skew reductions are achieved without needing to increase the interconnect widths owing to negative set-up times. Applications in data circuits are shown as well with a 90nm example. Parallel resonant and split-driver non-resonant configurations as well are derived from GSR. Tradeoffs in timing performance versus power, based on theoretical analysis, are compared for the first time and verified. This enables synthesis of an optimal topology for a given application from the GSR

Variation and power issues in VLSI clock networks

Clock Distribution Network (CDN) is an important component of any synchronous logic circuit. The function of CDN is to deliver the clock signal to the clock sinks. Clock skew is defined as the difference in the arrival time of the clock signal at the clock sinks. Higher uncertainty in skew (due to PVT variations) degrades circuit performance by decreasing the maximum possible delay between any two sequential elements. Aggressive frequency scaling has also led to high power consumption especially in CDN. This dissertation addresses variation and power issues in the design of current and potential future CDN. The research detailed in this work presents algorithmic techniques for the following problems: (1) Variation tolerance in useful skew design, (2) Link insertion for buffered clock nets, (3) Methodology and algorithms for rotary clocking and (4) Clock mesh optimization for skew-power trade off. For clock trees this dissertation presents techniques to integrate the different aspects of clock tree synthesis (skew scheduling, abstract topology and layout embedding) into one framework- tolerance to variations. This research addresses the issues involved in inserting cross-links in a buffered clock tree and proposes design criteria to avoid the risk of short-circuit current. Rotary clocking is a promising new clocking scheme that consists of unterminated rings formed by differential transmission lines. Rotary clocking achieves reduction in power dissipation clock skew. This dissertation addresses the issues in adopting current CAD methodology to rotary clocks. Alternative methodology and corresponding algorithmic techniques are detailed. Clock mesh is a popular form of CDN used in high performance systems. The problem of simultaneous sizing and placement of mesh buffers in a clock mesh is addressed. The algorithms presented remove the edges from the clock mesh to trade off skew tolerance for low power. For clock trees as well as link insertion, our experiments indicate significant reduction in clock skew due to variations. For clock mesh, experimental results indicate 18.5% reduction in power with 1.3% delay penalty on a average. In summary, this dissertation details methodologies/algorithms that address two critical issues- variation and power dissipation in current and potential future CDN

DLWUC: Distance and Load Weight Updated Clustering-Based Clock Distribution for SOC Architecture

High-clock skew variations and degradation of driving ability of buffers lead to an additional power dissipation in Clock Distribution Network (CDN) that increases the dimensionality of buffers and coordination among flip-flops. The manual threshold level to predict the Region of Interest (ROI) is not applicable in clustering process due to the complexities of excessive wire length and critical delay. This paper proposes the Distance and Load Weight Updated Clustering (DLWUC) to determine the suitable position of logical components. Initially, the DLWUC utilizes the Hybrid Weighted Distance (HWD) to estimate the distance and construct the distance matrix. The weight value extracted from the sorted distance matrix facilitates the projection of buffers. The updated weight value serves as the base for clustering with labeled outputs. The placement of buffer at the suitable place from load weight updated clustering provides the necessary trade-off between clock provision and load balance. The DLWUC discussed in this paper reduces the size of buffers, skew, power and latency compared to the existing topologies

High performance IC clock networks with grid and tree topologies

In this dissertation, an essential step in the integrated circuit (IC) physical design flow—the clock network design—is investigated. Clock network design entailsa series of computationally intensive, large-scale design and optimization tasks for the generation and distribution of the clock signal through different topologies. The lack or inefficacy of the automation for implementing high performance clock networks, especially for low-power, high speed and variation-aware implementations, is the main driver for this research. The synthesis and optimization methods for the two most commonly used clock topologies in IC design—the grid topology and the tree topology—are primarily investigated.The clock mesh network, which uses the grid topology, has very low skew variation at the cost of high power dissipation. Two novel clock mesh network designmethodologies are proposed in this dissertation in order to reduce the power dissipation. These are the first methods known in literature that combine clock meshsynthesis with incremental register placement and clock gating for power saving purposes. The application of the proposed automation methods on the emerging resonant rotary clocking technology, which also has the grid topology, is investigated in this dissertation as well.The clock tree topology has the advantage of lower power dissipation compared to other traditional clock topologies (e.g. clock mesh, clock spine, clock tree with cross links) at the cost of increased performance degradation due to on-chip variations. A novel clock tree buffer polarity assignment flow is proposed in this dissertation in order to reduce these effects of on-chip variations on the clock tree topology. The proposed polarity assignment flow is the first work that introduces post-silicon, dynamic reconfigurability for polarity assignment, enabling clock gating for low power operation of the variation-tolerant clock tree networks.Ph.D., Electrical Engineering -- Drexel University, 201

Design and automation of voltage-scaled clock networks

In this dissertation, a vital step of VLSI physical design flow, synthesis of clock distribution networks, is investigated. Clock network synthesis (CNS) involves large and complex optimization problems to achieve high performance and low power demands of current integrated circuits (ICs). Ineffectiveness of existing methodologies to provide high performance at lower voltage nodes is the main driver for this dissertation research. A design and automation flow for voltage-scaled clock networks is proposed to satisfy tight timing constraints at high frequency (for high performance) and low voltage (for low power) operation. One implementation of voltage-scaled clock networks is low (voltage) swing clocking, which is a known technique, yet its applicability remains limited to designs with low performance demands. In this dissertation, novel methodologies are introduced to i) apply low swing clocking to legacy designs as a power saving methodology, ii) develop a complete CNS flow for low swing clocking of high performance ICs. These methodologies include slew-driven approaches that are better suited to future transistor and interconnect technologies. Second implementation of voltage-scaled clock networks is multi-voltage clocking, which is another known technique, yet its applicability remains limited to clock tree topology. In this dissertation, multi-voltage clocking with a clock mesh topology is investigated in order to address a missing aspect in the current IC design flows. Practical considerations of the current IC design flows are also investigated in this dissertation to expand the applicability of the proposed CNS flow. A novel methodology is introduced to facilitate clock gating within low swing clocking. The applicability of low swing clocking to FinFET technology, which is currently the industry norm, is shown to be effective.Ph.D., Electrical Engineering -- Drexel University, 201

HIGH PERFORMANCE CLOCK DISTRIBUTION FOR HIGH-SPEED VLSI SYSTEMS

Tohoku University堀口 進課

Overcoming the challenges in very deep submicron for area reduction, power reduction and faster design closure

The project is aimed at understanding the existing very deep sub-micron (VDSM) implementation of a digital design, analyzing it from the point of view of power, area and timing and to come up with solutions and strategies to optimize the implementation in terms of power, area and timing. The effort involved, to understand the constraints, reasons and the requirements resulting in the existing implementation of the design. Further, various experiments were carried out to improve the design in various aspects like power, area and timing. The tradeoffs required and the benefits of each of the experiments were contrasted and analyzed. The optimum solutions and strategies which balance the requirements were tried out and published at the end of the report

High-performance and Low-power Clock Network Synthesis in the Presence of Variation.

Semiconductor technology scaling requires continuous evolution of all aspects of physical design of integrated circuits. Among the major design steps, clock-network synthesis has been greatly affected by technology scaling, rendering existing methodologies inadequate. Clock routing was previously sufficient for smaller ICs, but design difficulty and structural complexity have greatly increased as interconnect delay and clock frequency increased in the 1990s. Since a clock network directly influences IC performance and often consumes a substantial portion of total power, both academia and industry developed synthesis methodologies to achieve low skew, low power and robustness from PVT variations. Nevertheless, clock network synthesis under tight constraints is currently the least automated step in physical design and requires significant manual intervention, undermining turn-around-time. The need for multi-objective optimization over a large parameter space and the increasing impact of process variation make clock network synthesis particularly challenging. Our work identifies new objectives, constraints and concerns in the clock-network synthesis for systems-on-chips and microprocessors. To address them, we generate novel clock-network structures and propose changes in traditional physical-design flows. We develop new modeling techniques and algorithms for clock power optimization subject to tight skew constraints in the presence of process variations. In particular, we offer SPICE-accurate optimizations of clock networks, coordinated to reduce nominal skew below 5 ps, satisfy slew constraints and trade-off skew, insertion delay and power, while tolerating variations. To broaden the scope of clock-network-synthesis optimizations, we propose new techniques and a methodology to reduce dynamic power consumption by 6.8%-11.6% for large IC designs with macro blocks by integrating clock network synthesis within global placement. We also present a novel non-tree topology that is 2.3x more power-efficient than mesh structures. We fuse several clock trees to create large-scale redundancy in a clock network to bridge the gap between tree-like and mesh-like topologies. Integrated optimization techniques for high-quality clock networks described in this dissertation strong empirical results in experiments with recent industry-released benchmarks in the presence of process variation. Our software implementations were recognized with the first-place awards at the ISPD 2009 and ISPD 2010 Clock-Network Synthesis Contests organized by IBM Research and Intel Research.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/89711/1/ejdjsy_1.pd

Clock Distribution Network Optimization by Sequential Quadratic Programing

Clock mesh is widely used in microprocessor designs for achieving low clock skew and high process variation tolerance. Clock mesh optimization is a very diffcult problem to solve because it has a highly connected structure and requires accurate delay models which are computationally expensive. Existing methods on clock network optimization are either restricted to clock trees, which are easy to be separated into smaller problems, or naive heuristics based on crude delay models. A clock mesh sizing algorithm, which is aimed to minimize total mesh wire area with consideration of clock skew constraints, has been proposed in this research work. This algorithm is a systematic solution search through rigorous Sequential Quadratic Programming (SQP). The SQP is guided by an efficient adjoint sensitivity analysis which has near-SPICE(Simulation Program for Integrated Circuits Emphasis)-level accuracy and faster-than-SPICE speed. Experimental results on various benchmark circuits indicate that this algorithm leads to substantial wire area reduction while maintaining low clock skew in the clock mesh. The reduction in mesh area achieved is about 33%

Scalable Energy-Recovery Architectures.

Energy efficiency is a critical challenge for today's integrated circuits, especially for high-end digital signal processing and communications that require both high throughput and low energy dissipation for extended battery life. Charge-recovery logic recovers and reuses charge using inductive elements and has the potential to achieve order-of-magnitude improvement in energy efficiency while maintaining high performance. However, the lack of large-scale high-speed silicon demonstrations and inductor area overheads are two major concerns. This dissertation focuses on scalable charge-recovery designs. We present a semi-automated design flow to enable the design of large-scale charge-recovery chips. We also present a new architecture that uses in-package inductors, eliminating the area overheads caused by the use of integrated inductors in high-performance charge-recovery chips. To demonstrate our semi-automated flow, which uses custom-designed standard-cell-like dynamic cells, we have designed a 576-bit charge-recovery low-density parity-check (LDPC) decoder chip. Functioning correctly at clock speeds above 1 GHz, this prototype is the first-ever demonstration of a GHz-speed charge-recovery chip of significant complexity. In terms of energy consumption, this chip improves over recent state-of-the-art LDPCs by at least 1.3 times with comparable or better area efficiency. To demonstrate our architecture for eliminating inductor overheads, we have designed a charge-recovery LDPC decoder chip with in-package inductors. This test-chip has been fabricated in a 65nm CMOS flip-chip process. A custom 6-layer FC-BGA package substrate has been designed with 16 inductors embedded in the fifth layer of the package substrate, yielding higher Q and significantly improving area efficiency and energy efficiency compared to their on-chip counterparts. From measurements, this chip achieves at least 2.3 times lower energy consumption with better area efficiency over state-of-the-art published designs.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/116653/1/terryou_1.pd