Extended ecosystem signatures with application to Eos synergism requirements

The primary objective is to define the advantages of synergistically combining optical and microwave remote sensing measurements for the determination of biophysical properties important in ecosystem modeling. This objective was approached in a stepwise fashion starting with ground-based observations of controlled agricultural and orchard canopies and progressing to airborne observations of more natural forest ecosystems. This observational program is complemented by a parallel effort to model the visible reflectance and microwave scattering properties of composite vegetation canopies. The goals of the modeling studies are to verify our basic understanding of the sensor-scene interaction physics and to provide the basis for development of inverse models optimized for retrieval of key biophysical properties. These retrieval algorithms can then be used to simulate the expected performance of various aspects of Eos including the need for simultaneous SAR and HIRIS observations or justification for other (non-synchronous) relative timing constraints and the frequency, polarization, and angle of incidence requirements for accurate biophysical parameter extractions. This program completed a very successful series of truck-mounted experiments, made remarkable progress in development and validation of optical reflectance and microwave scattering models for vegetation, extended the scattering models to accommodate discontinuous and periodic canopies, developed inversion approaches for surface and canopy properties, and disseminated these results widely through symposia and journal publications. In addition, the third generation of the computer code for the microwave scattering models was provided to a number of other US, Canadian, Australian, and European investigators who are currently presenting and publishing results using the MIMICS research code

Characterization of black walnut (Juglans nigra) cultivars for agroforestry systems

The identification of complementary species combinations will accelerate the expansion of temperate agroforestry. Since the mid-19th century, European timber plantations have taken advantage of the late-leafing habit of walnut (Juglans spp.) to grow a spring grain crop between the tree rows. A parallel but underutilized opportunity in North American involves incorporating eastern black walnut (Juglans nigra L.) cultivars into alley cropping systems. Eastern black walnut is native to North America and exhibits architectural and phenological characters for reduced competition with winter alley crops. Black walnut also produces nutritious nuts, and cultivars with improved kernel percentage and mass offer potential to cultivate the species as a domesticated orchard crop, as opposed to just the high-quality timber for which it is well-known. However, field observations suggest significant variation in tree architecture and phenology amongst cultivars, which is likely to influence complementarity with winter grains. Comprehensive characterization of trait genetic diversity is needed to best leverage germplasm into productive systems. FirstHere, we review literatureliterature is reviewed related to implementing alley cropping systems (ACS) with consideration of cultivar-dependent traits that may reduce interspecific competition. In additionIn addition, an experiment was performed characterizing black walnut cultivars for their aboveground compatibility for light inwith alley cropping systems. A population of 11 cultivars with replicates in New Franklin, MO was measured for understory light infiltration from April-June of 2021. Results showed over a two-fold difference in light infiltration between the most contrasting cultivars during the second week of May. Tree architecture and phenological event timing were also measured to determine potential causative factors of differences observed. The impact of this research may help growers interested in walnut alley cropping with cultivar selection and management practices for effective agroforestry systems. While the compatibility between tree and crops is an important factor in agroforestry design, cultivars must also be commercially productive for robust adoption by growers. An additional study was performed on the performance of 7 selections from the UMCA Black Walnut Breeding Program. A replicated population of these selections were observed in 2017 and 2021 for key traits for improving the commercial production quality of black walnut such as yield, kernel percentage and kernel mass. Results showed selections were able to significantly outperform the parental generation in these traits by as much as 135 percent. Additional years of harvest data as well as replication sites for this trial will help refine the understanding of the commercial performance of selections and allow for broader recommendations to growers at large. While the focus in this thesis is directed toward black walnut, broad characterization of other underutilized fruit/nut species will allow for robust diversification of ACS.Includes bibliographical references

The Use of Agricultural Robots in Orchard Management

Book chapter that summarizes recent research on agricultural robotics in orchard management, including Robotic pruning, Robotic thinning, Robotic spraying, Robotic harvesting, Robotic fruit transportation, and future trends.Comment: 22 page

Role of chemical canopy sprays and irrigation methods on the incidence of the perennial canker, Cytospora plurivora in western Colorado peach orchards, The

Includes bibliographical references.2022 Fall.Cytospora plurivora is a secondary pathogen that has reached near epidemic levels in peach orchards on the western slope of Colorado. C. plurivora is responsible for Cytospora canker disease and is a limiting factor in peach production in the Grand Valley. Peach growers have limited management methods available to combat this disease, which prompted an investigation into irrigation practices as well as prophylactic chemical sprays following freeze events. In late 2020, the western slope received a freeze event that caused severe damage to peach shoots, buds, and twigs. Freeze damage provides infection courts within tree tissues that C. plurivora can infect. This freeze event prompted growers to apply prophylactic chemical sprays of Captan, lime sulfur, and lime sulfur with the addition of NuFilm. An efficacy threshold of three-months post chemical spray was determined for both Captan and lime sulfur treatments. Lime sulfur with the addition of NuFilm showed a loss of efficacy at two-months post spray. Additionally, an investigation into the movement of C. plurivora conidia under differing irrigation techniques was conducted. Both drip and micro-sprinkler treatments had positive detections for C. plurivora over the course of the study. In these studies, conidia traveled much greater distances than previously shown, traveling up to 135m from the closest canker. Understanding how chemical canopy sprays and different watering practices affect the incidence of Cytospora canker disease will assist in preserving the peach industry on the western slope of Colorado

Modeling canopy-induced turbulence in the Earth system: a unified parameterization of turbulent exchange within plant canopies and the roughness sublayer (CLM-ml v0)

Land surface models used in climate models neglect the roughness sublayer and parameterize within-canopy turbulence in an ad hoc manner. We implemented a roughness sublayer turbulence parameterization in a multilayer canopy model (CLM-ml v0) to test if this theory provides a tractable parameterization extending from the ground through the canopy and the roughness sublayer. We compared the canopy model with the Community Land Model (CLM4.5) at seven forest, two grassland, and three cropland AmeriFlux sites over a range of canopy heights, leaf area indexes, and climates. CLM4.5 has pronounced biases during summer months at forest sites in midday latent heat flux, sensible heat flux, gross primary production, nighttime friction velocity, and the radiative temperature diurnal range. The new canopy model reduces these biases by introducing new physics. Advances in modeling stomatal conductance and canopy physiology beyond what is in CLM4.5 substantially improve model performance at the forest sites. The signature of the roughness sublayer is most evident in nighttime friction velocity and the diurnal cycle of radiative temperature, but is also seen in sensible heat flux. Within-canopy temperature profiles are markedly different compared with profiles obtained using Monin–Obukhov similarity theory, and the roughness sublayer produces cooler daytime and warmer nighttime temperatures. The herbaceous sites also show model improvements, but the improvements are related less systematically to the roughness sublayer parameterization in these canopies. The multilayer canopy with the roughness sublayer turbulence improves simulations compared with CLM4.5 while also advancing the theoretical basis for surface flux parameterizations

Fine-Scale Genetic Structure of \u3ci\u3eMonilinia fructicola\u3c/i\u3e During Brown Rot Epidemics Within Individual Peach Tree Canopies

The purpose of this study was to determine the fine-scale genetic structure of populations of the brown rot pathogen Monilinia fructicola within individual peach tree canopies to better understand within-tree plant pathogen diversity and to complement previous work on spatiotemporal development of brown rot disease at the canopy level. Across 3 years in a total of six trees, we monitored disease development, collected isolates from every M. fructicola symptom during the course of the season, and created high-resolution three-dimensional maps of all symptom and isolate locations within individual canopies using an electromagnetic digitizer. Each canopy population (65 to 173 isolates per tree) was characterized using a set of 13 microsatellite markers and analyzed for evidence of spatial genetic autocorrelation among isolates during the epidemic phase of the disease. Results showed high genetic diversity (average uh = 0.529) and high genotypic diversity (average D = 0.928) within canopies. The percentage of unique multilocus genotypes within trees was greater for blossom blight isolates (78.2%) than for fruit rot isolates (51.3%), indicating a greater contribution of clonal reproduction during the preharvest epidemic. For fruit rot isolates, between 54.2 and 81.7% of isolates were contained in one to four dominant clonal genotypes per tree having at least 10 members. All six fruit rot populations showed positive and significant spatial genetic autocorrelation for distance classes between 0.37 and 1.48 m. Despite high levels of within-tree pathogen diversity, the contribution of locally available inoculum combined with short-distance dispersal is likely the main factor generating clonal population foci and associated spatial genetic clustering within trees

Assessment of the three-dimensional architecture of walnut trees using digitising.

A method for the measurement of the three-dimensional (3D) architecture of trees was applied to describe two 20-year-old walnut trees, one of them is a timber tree while the other is a fruit tree. The method works at the shoot level and simultaneously describes the plant topology, the plant geometry and the shoot morphology. The method uses a 3D digitiser (3SPACE® FASTRAK®, Polhemus Inc.) associated with software DiplAmi designed for digitiser control and data acquisition management. Plant images may be reconstructed from the data set by using the ray tracing software POV-Ray. Visual comparison between photographs of the walnut trees and images synthesised from digitising was satisfactory. Distribution of basal shoot diameter, as well as leaf area and fruit distributions for both the timber and the fruit tree were non-uniformly distributed in the crown volume. Gradients were likely to be related to the light distribution within the tree. This is in agreement with previous experimental results on several tree species, and also with the predictions of tree architecture models based on light-vegetation interactions

Advances in Rootstock Breeding of Nut Trees: Objectives and Strategies

The production and consumption of nuts are increasing in the world due to strong economic returns and the nutritional value of their products. With the increasing role and importance given to nuts (i.e., walnuts, hazelnut, pistachio, pecan, almond) in a balanced and healthy diet and their benefits to human health, breeding of the nuts species has also been stepped up. Most recent fruit breeding programs have focused on scion genetic improvement. However, the use of locally adapted grafted rootstocks also enhanced the productivity and quality of tree fruit crops. Grafting is an ancient horticultural practice used in nut crops to manipulate scion phenotype and productivity and overcome biotic and abiotic stresses. There are complex rootstock breeding objectives and physiological and molecular aspects of rootstock–scion interactions in nut crops. In this review, we provide an overview of these, considering the mechanisms involved in nutrient and water uptake, regulation of phytohormones, and rootstock influences on the scion molecular processes, including long-distance gene silencing and trans-grafting. Understanding the mechanisms resulting from rootstock × scion × environmental interactions will contribute to developing new rootstocks with resilience in the face of climate change, but also of the multitude of diseases and pests.info:eu-repo/semantics/publishedVersio