Achieving Large Multiplexing Gain in Distributed Antenna Systems via Cooperation with pCell Technology

In this paper we present pCellTM technology, the first commercial-grade wireless system that employs cooperation between distributed transceiver stations to create concurrent data links to multiple users in the same spectrum. First we analyze the per-user signal-to-interference-plus-noise ratio (SINR) employing a geometrical spatial channel model to define volumes in space of coherent signal around user antennas (or personal cells, i.e., pCells). Then we describe the system architecture consisting of a general-purpose-processor (GPP) based software-defined radio (SDR) wireless platform implementing a real-time LTE protocol stack to communicate with off-the-shelf LTE devices. Finally we present experimental results demonstrating up to 16 concurrent spatial channels for an aggregate average spectral efficiency of 59.3 bps/Hz in the downlink and 27.5 bps/Hz in the uplink, providing data rates of 200 Mbps downlink and 25 Mbps uplink in 5 MHz of TDD spectrum.Comment: IEEE Asilomar Conference on Signals, Systems, and Computers, Nov. 8-11th 2015, Pacific Grove, CA, US

High density circuit technology

Acquisition of polyimide materials for inter-metal dielectrics was obtained from three vendors, with considerable evaluation conducted on the Dupont PI2550 material. Experimental results indicate this material can be patterned using contact printing to line width far below 0.1 mils. Optimum line width is acquired using plasma etch equipment. Metal lift-off experiments on thermal evaporated films were optimized for application to sputtered deposited films. Alternate metal-lift-off experiments are proposed for future investigation. Dry processing equipment studies and future trends in VLSI fabrication techniques are on-going

AMiBA Wideband Analog Correlator

A wideband analog correlator has been constructed for the Yuan-Tseh Lee Array for Microwave Background Anisotropy. Lag correlators using analog multipliers provide large bandwidth and moderate frequency resolution. Broadband IF distribution, backend signal processing and control are described. Operating conditions for optimum sensitivity and linearity are discussed. From observations, a large effective bandwidth of around 10 GHz has been shown to provide sufficient sensitivity for detecting cosmic microwave background variations.Comment: 28 pages, 23 figures, ApJ in press

The Hawaii Muon Beamline.

M.S. Thesis. University of Hawaiʻi at Mānoa 2017

Developing and evaluating a hybrid wind instrument

A hybrid wind instrument generates self-sustained sounds via a real-time interaction between a computed excitation model (such as the physical model of human lips interacting with a mouthpiece) and a real acoustic resonator. Attempts to produce a hybrid instrument have so far fallen short, in terms of both the accuracy and the variation in the sound produced. The principal reason for the failings of previous hybrid instruments is the actuator which, controlled by the excitation model, introduces a fluctuating component into the air flow injected into the resonator. In the present paper, the possibility of using a loudspeaker to supply the calculated excitation signal is evaluated. A theoretical study has facilitated the modeling of the loudspeaker-resonator system and the design of a feedback and feedforward filter to successfully compensate for the presence of the loudspeaker. The resulting self-sustained sounds are evaluated by a mapping of their sound descriptors to the input parameters of the physical model of the embouchure, both for sustained and attack sounds. Results are compared with simulations. The largely coherent functioning confirms the usefulness of the device in both musical and research contexts

Süsteemi arhitektuur ning komponentide valimine ESTCube-2 toitealamsüsteemi jaoks

This thesis is focused on the architecture of the electrical power system (EPS) and implementations of the various subsystems within the EPS for ESTCube-2 nanosatellite. The main goals are to establish a high level system architecture compatible with the rest of the satellite and investigate solutions for the battery management and protection (BMPS) and the voltage conversion and power distribution systems (VCPDS). In this work, an overview is given of the ESTCube-2 mission and the satellite’s architecture. Based on the satellite architecture, requirements are set for the EPS subsystems to be investigated. For the BMPS, two hot-swap controller based solutions are investigated, prototyped and tested. For the VCPDS, two load switch designs are evaluated, six different voltage converters are characterized and solutions for the power distribution system are proposed. Based on the testing results, recommendations are made for the final implementation

Development and application of computer software techniques to human factors task data handling problems Final report, 21 Jun. 1965 - 21 Jun. 1966

Computer software techniques applied to human factors task data handling problem