Racetrack Microtron—Pushing the Limits

We consider three types of electron accelerators that can be used for various applications, such as industrial, medical, cargo inspection, and isotope production applications, and that require small- and medium-sized machines, namely classical microtron (CM), race-track microtron (RTM), and multisection linac. We review the principles of their operation, the specific features of the beam dynamics in these machines, discuss their advantages and weak points, and compare their technical characteristics. In particular, we emphasize the intrinsic symmetry of the stability region of microtrons. We argue that RTMs can be a preferable choice for medium energies (up to 100 MeV) and that the range of their potential applications can be widened, provided that the beam current losses are significantly reduced. In the article, we analyze two possible solutions in detail, namely increasing the longitudinal acceptance of an RTM using a higher-order harmonic accelerating structure and improving beam matching at the injection.Peer ReviewedPostprint (published version

Low-Power Laser Powder Bed Fusion Processing of Scalmalloy®

Among recently developed high-strength and lightweight alloys, the high-performance Scalmalloy(®) certainly stands out for laser powder bed fusion (LPBF) production. The primary goal of this study was to optimize the Scalmalloy(®) LPBF process parameters by setting power values suitable for the use of lab-scale machines. Despite that these LPBF machines are commonly characterized by considerably lower maximum power values (around 100 W) compared to industrial-scale machines (up to 480 W), they are widely used when quick setup and short processing time are needed and a limited amount of powder is available. In order to obtain the optimal process parameters, the influence of volumetric energy density (VED) on the sample porosity, microstructure and mechanical properties was accurately studied. The obtained results reveal the stability of the microstructural and mechanical behaviour of the alloy for VEDs higher than 175 Jmm(−3). In this way, an energy-and-time-saving choice at low VEDs can be taken for the LPBF production of Scalmalloy(®). After identifying the low-power optimized process parameters, the effects of the heat treatment on the microstructural and mechanical properties were investigated. The results prove that low-VED heat-treated samples produced with an LPBF lab-scale machine can achieve outstanding mechanical performance compared with the results of energy-intensive industrial production

Diagnosis of low-speed bearing degradation using acoustic emission techniques

It is widely acknowledged that bearing failures are the primary reason for breakdowns in rotating machinery. These failures are extremely costly, particularly in terms of lost production. Roller bearings are widely used in industrial machinery and need to be maintained in good condition to ensure the continuing efficiency, effectiveness, and profitability of the production process. The research presented here is an investigation of the use of acoustic emission (AE) to monitor bearing conditions at low speeds. Many machines, particularly large, expensive machines operate at speeds below 100 rpm, and such machines are important to the industry. However, the overwhelming proportion of studies have investigated the use of AE techniques for condition monitoring of higher-speed machines (typically several hundred rpm, or even higher). Few researchers have investigated the application of these techniques to low-speed machines (<100 rpm), This PhD addressed this omission and has established which, of the available, AE techniques are suitable for the detection of incipient faults and measurement of fault growth in low-speed bearings. The first objective of this research program was to assess the applicability of AE techniques to monitor low-speed bearings. It was found that the measured statistical parameters successfully monitored bearing conditions at low speeds (10-100 rpm). The second objective was to identify which commonly used statistical parameters derived from the AE signal (RMS, kurtosis, amplitude and counts) could identify the onset of a fault in either race. It was found that the change in AE amplitude and AE RMS could identify the presence of a small fault seeded into either the inner or the outer races. However, the severe attenuation of the signal from the inner race meant that, while AE amplitude and RMS could readily identify the incipient fault, kurtosis and the AE counts could not. Thus, more attention needs to be given to analysing the signal from the inner race. The third objective was to identify a measure that would assess the degree of severity of the fault. However, once the defect was established, it was found that of the parameters used only AE RMS was sensitive to defect size. The fourth objective was to assess whether the AE signal is able to detect defects located at either the centre or edge of the outer race of a bearing rotating at low speeds. It is found that all the measured AE parameters had higher values when the defect was seeded in the middle of the outer race, possibly due to the shorter path traversed by the signal between source and sensor which gave a lower attenuation than when the defect was on the edge of the outer race. Moreover, AE can detect the defect at both locations, which confirmed the applicability of the AE to monitor the defects at any location on the outer race

Young poker faces: Compliance with the legal age limit on multiple gambling products in the Netherlands

Gambling is an activity that can be performed on-premise (slot machines in casinos, bars and restaurants) or off-premise (scratch cards and lottery tickets). Although the addictive potential may depend on the specific gambling product, early onset increases the likelihood for future pathological gambling. To delay the onset of gambling behavior and to reduce gambling-related problems, many countries have introduced age limits that should decrease the availability of gambling products to underage individuals. In this study we evaluated compliance to the legal age limit, making use of a mystery shopping method. We distinguished between (1) off-premise scratch cards (n = 51); (2) off-premise lottery tickets (n = 49); (3) on-premise slot machines in casinos (n = 88); and (4) on-premise slot machines in the catering industry (n = 100), and we focus on the factors, such as characteristics of the establishment, buyer, and vendor, that may account for possible differences. The 288 visits demonstrate that gambling products are highly available and accessible to under-aged customers; young customers are still able to gamble despite the legal regulations. The compliance rates fluctuate and appear to be related to the specific gambling product in question. Furthermore, age verification activities and certain outlet- and buyer characteristics, as well as characteristics associated with the purchase attempt, may influence compliance

Successful threshing ring management

Cover title.Includes bibliographical references

Post-Election Audits: Restoring Trust in Elections

With the intention of assisting legislators, election officials and the public to make sense of recent literature on post-election audits and convert it into realistic audit practices, the Brennan Center and the Samuelson Law, Technology and Public Policy Clinic at Boalt Hall School of Law (University of California Berkeley) convened a blue ribbon panel (the "Audit Panel") of statisticians, voting experts, computer scientists and several of the nation's leading election officials. Following a review of the literature and extensive consultation with the Audit Panel, the Brennan Center and the Samuelson Clinic make several practical recommendations for improving post-election audits, regardless of the audit method that a jurisdiction ultimately decides to adopt