Relating vanishing points to catadioptric camera calibration

This paper presents the analysis and derivation of the geometric relation between vanishing points and camera parameters of central catadioptric camera systems. These vanishing points correspond to the three mutually orthogonal directions of 3D real world coordinate system (i.e. X, Y and Z axes). Compared to vanishing points (VPs) in the perspective projection, the advantages of VPs under central catadioptric projection are that there are normally two vanishing points for each set of parallel lines, since lines are projected to conics in the catadioptric image plane. Also, their vanishing points are usually located inside the image frame. We show that knowledge of the VPs corresponding to XYZ axes from a single image can lead to simple derivation of both intrinsic and extrinsic parameters of the central catadioptric system. This derived novel theory is demonstrated and tested on both synthetic and real data with respect to noise sensitivity

Deep Learning for Vanishing Point Detection Using an Inverse Gnomonic Projection

We present a novel approach for vanishing point detection from uncalibrated monocular images. In contrast to state-of-the-art, we make no a priori assumptions about the observed scene. Our method is based on a convolutional neural network (CNN) which does not use natural images, but a Gaussian sphere representation arising from an inverse gnomonic projection of lines detected in an image. This allows us to rely on synthetic data for training, eliminating the need for labelled images. Our method achieves competitive performance on three horizon estimation benchmark datasets. We further highlight some additional use cases for which our vanishing point detection algorithm can be used.Comment: Accepted for publication at German Conference on Pattern Recognition (GCPR) 2017. This research was supported by German Research Foundation DFG within Priority Research Programme 1894 "Volunteered Geographic Information: Interpretation, Visualisation and Social Computing

Camera distortion self-calibration using the plumb-line constraint and minimal Hough entropy

In this paper we present a simple and robust method for self-correction of camera distortion using single images of scenes which contain straight lines. Since the most common distortion can be modelled as radial distortion, we illustrate the method using the Harris radial distortion model, but the method is applicable to any distortion model. The method is based on transforming the edgels of the distorted image to a 1-D angular Hough space, and optimizing the distortion correction parameters which minimize the entropy of the corresponding normalized histogram. Properly corrected imagery will have fewer curved lines, and therefore less spread in Hough space. Since the method does not rely on any image structure beyond the existence of edgels sharing some common orientations and does not use edge fitting, it is applicable to a wide variety of image types. For instance, it can be applied equally well to images of texture with weak but dominant orientations, or images with strong vanishing points. Finally, the method is performed on both synthetic and real data revealing that it is particularly robust to noise.Comment: 9 pages, 5 figures Corrected errors in equation 1

Traffic Danger Recognition With Surveillance Cameras Without Training Data

We propose a traffic danger recognition model that works with arbitrary traffic surveillance cameras to identify and predict car crashes. There are too many cameras to monitor manually. Therefore, we developed a model to predict and identify car crashes from surveillance cameras based on a 3D reconstruction of the road plane and prediction of trajectories. For normal traffic, it supports real-time proactive safety checks of speeds and distances between vehicles to provide insights about possible high-risk areas. We achieve good prediction and recognition of car crashes without using any labeled training data of crashes. Experiments on the BrnoCompSpeed dataset show that our model can accurately monitor the road, with mean errors of 1.80% for distance measurement, 2.77 km/h for speed measurement, 0.24 m for car position prediction, and 2.53 km/h for speed prediction.Comment: To be published in proceedings of Advanced Video and Signal-based Surveillance (AVSS), 2018 15th IEEE International Conference on, pp. 378-383, IEE

A smart environment for biometric capture

The development of large scale biometric systems require experiments to be performed on large amounts of data. Existing capture systems are designed for fixed experiments and are not easily scalable. In this scenario even the addition of extra data is difficult. We developed a prototype biometric tunnel for the capture of non-contact biometrics. It is self contained and autonomous. Such a configuration is ideal for building access or deployment in secure environments. The tunnel captures cropped images of the subject's face and performs a 3D reconstruction of the person's motion which is used to extract gait information. Interaction between the various parts of the system is performed via the use of an agent framework. The design of this system is a trade-off between parallel and serial processing due to various hardware bottlenecks. When tested on a small population the extracted features have been shown to be potent for recognition. We currently achieve a moderate throughput of approximate 15 subjects an hour and hope to improve this in the future as the prototype becomes more complete

Automatic Detection of Calibration Grids in Time-of-Flight Images

It is convenient to calibrate time-of-flight cameras by established methods, using images of a chequerboard pattern. The low resolution of the amplitude image, however, makes it difficult to detect the board reliably. Heuristic detection methods, based on connected image-components, perform very poorly on this data. An alternative, geometrically-principled method is introduced here, based on the Hough transform. The projection of a chequerboard is represented by two pencils of lines, which are identified as oriented clusters in the gradient-data of the image. A projective Hough transform is applied to each of the two clusters, in axis-aligned coordinates. The range of each transform is properly bounded, because the corresponding gradient vectors are approximately parallel. Each of the two transforms contains a series of collinear peaks; one for every line in the given pencil. This pattern is easily detected, by sweeping a dual line through the transform. The proposed Hough-based method is compared to the standard OpenCV detection routine, by application to several hundred time-of-flight images. It is shown that the new method detects significantly more calibration boards, over a greater variety of poses, without any overall loss of accuracy. This conclusion is based on an analysis of both geometric and photometric error.Comment: 11 pages, 11 figures, 1 tabl