Roll Calibration for CryoSat-2: a comprehensive approach

International audienceCryoSat-2 is the first satellite mission carrying a high pulse repetition frequency radar altimeter with interferometric capability on board. Across track interferometry allows the angle to the point of closest approach to be determined by combining echoes received by two antennas and knowledge of their orientation. Accurate information of the platform mispointing angles, in particular of the roll, is crucial to determine the angle of arrival in the across-track direction with sufficient accuracy. As a consequence, different methods were designed in the CryoSat-2 calibration plan in order to estimate interferometer performance along with the mission and to assess the roll’s contribution to the accuracy of the angle of arrival. In this paper, we present the comprehensive approach used in the CryoSat-2 Mission to calibrate the roll mispointing angle, combining analysis from external calibration of both man-made targets, i.e., transponder and natural targets. The roll calibration approach for CryoSat-2 is proven to guarantee that the interferometric measurements are exceeding the expected performance

Comparison of sea-ice freeboard distributions from aircraft data and cryosat-2

The only remote sensing technique capable of obtain- ing sea-ice thickness on basin-scale are satellite altime- ter missions, such as the 2010 launched CryoSat-2. It is equipped with a Ku-Band radar altimeter, which mea- sures the height of the ice surface above the sea level. This method requires highly accurate range measure- ments. During the CryoSat Validation Experiment (Cry- oVEx) 2011 in the Lincoln Sea, Cryosat-2 underpasses were accomplished with two aircraft, which carried an airborne laser-scanner, a radar altimeter and an electro- magnetic induction device for direct sea-ice thickness re- trieval. Both aircraft flew in close formation at the same time of a CryoSat-2 overpass. This is a study about the comparison of the sea-ice freeboard and thickness dis- tribution of airborne validation and CryoSat-2 measure- ments within the multi-year sea-ice region of the Lincoln Sea in spring, with respect to the penetration of the Ku- Band signal into the snow

CryoSat instrument performance and ice product quality status

Over the past 20 years, satellite radar altimetry has shown its ability to revolutionise our understanding of the ocean and climate. Previously, these advances were largely limited to ice-free regions, neglecting large portions of the Polar Regions. Launched in 2010, the European Space Agency’s (ESA) polar-orbiting CryoSat satellite was specifically designed to measure changes in the thickness of polar sea ice and the elevation of the ice sheets and mountain glaciers. To reach this goal, the CryoSat products have to meet the highest performance standards, achieved through continual improvements of the associated Instrument Processing Facilities. Since April 2015, the CryoSat ice products are generated with Baseline-C, which represented a major processor upgrade. Several improvements were implemented in this new Baseline, most notably the release of freeboard data within the Level 2 products. The Baseline-C upgrade has brought significant improvements to the quality of Level-1B and Level-2 products relative to the previous Baseline-B products, which in turn is expected to have a positive impact on the scientific exploitation of CryoSat measurements over land ice and sea ice. This paper provides an overview of the CryoSat ice data quality assessment and evolutions, covering all quality control and calibration activities performed by ESA and its partners. Also discussed are the forthcoming evolutions of the processing chains and improvements anticipated in the next processing Baseline