Joint Ultra-wideband and Signal Strength-based Through-building Tracking for Tactical Operations

Accurate device free localization (DFL) based on received signal strength (RSS) measurements requires placement of radio transceivers on all sides of the target area. Accuracy degrades dramatically if sensors do not surround the area. However, law enforcement officers sometimes face situations where it is not possible or practical to place sensors on all sides of the target room or building. For example, for an armed subject barricaded in a motel room, police may be able to place sensors in adjacent rooms, but not in front of the room, where the subject would see them. In this paper, we show that using two ultra-wideband (UWB) impulse radios, in addition to multiple RSS sensors, improves the localization accuracy, particularly on the axis where no sensors are placed (which we call the x-axis). We introduce three methods for combining the RSS and UWB data. By using UWB radios together with RSS sensors, it is still possible to localize a person through walls even when the devices are placed only on two sides of the target area. Including the data from the UWB radios can reduce the localization area of uncertainty by more than 60%.Comment: 9 pages, conference submissio

Self-Calibration Methods for Uncontrolled Environments in Sensor Networks: A Reference Survey

Growing progress in sensor technology has constantly expanded the number and range of low-cost, small, and portable sensors on the market, increasing the number and type of physical phenomena that can be measured with wirelessly connected sensors. Large-scale deployments of wireless sensor networks (WSN) involving hundreds or thousands of devices and limited budgets often constrain the choice of sensing hardware, which generally has reduced accuracy, precision, and reliability. Therefore, it is challenging to achieve good data quality and maintain error-free measurements during the whole system lifetime. Self-calibration or recalibration in ad hoc sensor networks to preserve data quality is essential, yet challenging, for several reasons, such as the existence of random noise and the absence of suitable general models. Calibration performed in the field, without accurate and controlled instrumentation, is said to be in an uncontrolled environment. This paper provides current and fundamental self-calibration approaches and models for wireless sensor networks in uncontrolled environments

SELF-CALIBRATING PARTICIPATORY WIRELESS INDOOR LOCALIZATION

Ph.DDOCTOR OF PHILOSOPH

Cooperative Position and Orientation Estimation with Multi-Mode Antennas

Robotic multi-agent systems are envisioned for planetary exploration and terrestrial applications. Autonomous operation of robots requires estimations of their positions and orientations, which are obtained from the direction-of-arrival (DoA) and the time-of-arrival (ToA) of radio signals exchanged among the agents. In this thesis, we estimate the signal DoA and ToA using a multi-mode antenna (MMA). An MMA is a single antenna element, where multiple orthogonal current modes are excited by different antenna ports. We provide a first study on the use of MMAs for cooperative position and orientation estimation, specifically exploring their DoA estimation capabilities. Assuming the agents of a cooperative network are equipped with MMAs, lower bounds on the achievable position and orientation accuracy are derived. We realize a gap between the theoretical lower bounds and real-world performance of a cooperative radio localization system, which is caused by imperfect antenna and transceiver calibration. Consequentially, we theoretically analyze in-situ antenna calibration, introduce an algorithm for the calibration of arbitrary multiport antennas and show its effectiveness by simulation. To also improve calibration during operation, we propose cooperative simultaneous localization and calibration (SLAC). We show that cooperative SLAC is able to estimate antenna responses and ranging biases of the agents together with their positions and orientations, leading to considerably better position and orientation accuracy. Finally, we validate the results from theory and simulation by experiments with robotic rovers equipped with software-defined radios (SDRs). In conclusion, we show that DoA estimation with an MMA is feasible, and accuracy can be improved by in-situ calibration and SLAC

Doctor of Philosophy

dissertationThis work seeks to improve upon existing methods for device-free localization (DFL) using radio frequency (RF) sensor networks. Device-free localization is the process of determining the location of a target object, typically a person, without the need for a device to be with the object to aid in localization. An RF sensor network measures changes to radio propagation caused by the presence of a person to locate that person. We show how existing methods which use either wideband or narrowband RF channels can be improved in ways including localization accuracy, energy efficiency, and system cost. We also show how wideband and narrowband systems can combine their information to improve localization. A common assumption in ultra-wideband research is that to estimate the bistatic delay or range, "background subtraction" is effective at removing clutter and must first be performed. Another assumption commonly made is that after background subtraction, each individual multipath component caused by a person's presence can be distinguished perfectly. We show that these assumptions are often not true and that ranging can still be performed even when these assumptions are not true. We propose modeling the difference between a current set of channel impulse responses (CIR) and a set of calibration CIRs as a hidden Markov model (HMM) and show the effectiveness of this model over background subtraction. The methods for performing device-free localization by using ultra-wideband (UWB) measurements and by using received signal strength (RSS) measurements are often considered separate topic of research and viewed only in isolation by two different communities of researchers. We consider both of these methods together and propose methods for combining the information obtained from UWB and RSS measurements. We show that using both methods in conjunction is more effective than either method on its own, especially in a setting where radio placement is constrained. It has been shown that for RSS-based DFL, measuring on multiple channels improves localization accuracy. We consider the trade-o s of measuring all radio links on all channels and the energy and latency expense of making the additional measurements required when sampling multiple channels. We also show the benefits of allowing multiple radios to transmit simultaneously, or in parallel, to better measure the available radio links