81,762 research outputs found
Footprints of a possible Ceres asteroid paleo-family
Ceres is the largest and most massive body in the asteroid main belt.
Observational data from the Dawn spacecraft reveal the presence of at least two
impact craters about 280~km in diameter on the Ceres surface, that could have
expelled a significant number of fragments. Yet, standard techniques for
identifying dynamical asteroid families have not detected any Ceres family. In
this work, we argue that linear secular resonances with Ceres deplete the
population of objects near Ceres. Also, because of the high escape velocity
from Ceres, family members are expected to be very dispersed, with a
considerable fraction of km-sized fragments that should be able to reach the
pristine region of the main belt, the area between the 5J:-2A and 7J:-3A
mean-motion resonances, where the observed number of asteroids is low. Rather
than looking for possible Ceres family members near Ceres, here we propose to
search in the pristine region. We identified 156 asteroids whose taxonomy,
colors, albedo could be compatible with being fragments from Ceres. Remarkably,
most of these objects have inclinations near that of Ceres itself.Comment: 12 pages, 6 figures, 1 table. Accepted for publication in MNRA
The Effects of Different Footprint Sizes and Cloud Algorithms on the Top-Of-Atmosphere Radiative Flux Calculation from the Clouds and Earths Radiant Energy System (CERES) Instrument on Suomi National Polar-Orbiting Partnership (NPP)
Only one Clouds and Earths Radiant Energy System (CERES) instrument is onboard the Suomi National Polar-orbiting Partnership (NPP) and it has been placed in cross-track mode since launch; it is thus not possible to construct a set of angular distribution models (ADMs) specific for CERES on NPP. Edition 4 Aqua ADMs are used for flux inversions for NPP CERES measurements. However, the footprint size of NPP CERES is greater than that of Aqua CERES, as the altitude of the NPP orbit is higher than that of the Aqua orbit. Furthermore, cloud retrievals from the Visible Infrared Imaging Radiometer Suite (VIIRS) and the Moderate Resolution Imaging Spectroradiometer (MODIS), which are the imagers sharing the spacecraft with NPP CERES and Aqua CERES, are also different. To quantify the flux uncertainties due to the footprint size difference between Aqua CERES and NPP CERES, and due to both the footprint size difference and cloud property difference, a simulation is designed using the MODIS pixel-level data, which are convolved with the Aqua CERES and NPP CERES point spread functions (PSFs) into their respective footprints. The simulation is designed to isolate the effects of footprint size and cloud property differences on flux uncertainty from calibration and orbital differences between NPP CERES and Aqua CERES. The footprint size difference between Aqua CERES and NPP CERES introduces instantaneous flux uncertainties in monthly gridded NPP CERES measurements of less than 4.0 W/sq. m for SW (shortwave) and less than 1.0 W/sq. m for both daytime and nighttime LW (longwave). The global monthly mean instantaneous SW flux from simulated NPP CERES has a low bias of 0.4 W/sq. m when compared to simulated Aqua CERES, and the root-mean-square (RMS) error is 2.2 W/sq. m between them; the biases of daytime and night- time LW flux are close to zero with RMS errors of 0.8 and 0.2 W/sq. m. These uncertainties are within the uncertainties of CERES ADMs. When both footprint size and cloud property (cloud fraction and optical depth) differences are considered, the uncertainties of monthly gridded NPP CERES SW flux can be up to 20 W/sq. m in the Arctic regions where cloud optical depth retrievals from VIIRS differ significantly from MODIS. The global monthly mean instantaneous SW flux from simulated NPP CERES has a high bias of 1.1 W/sq. m and the RMS error increases to 5.2 W/sq. m. LW flux shows less sensitivity to cloud property differences than SW flux, with uncertainties of about 2 W/sq. m in the monthly gridded LW flux, and the RMS errors of global monthly mean daytime and nighttime fluxes increase only slightly. These results highlight the importance of consistent cloud retrieval algorithms to maintain the accuracy and stability of the CERES climate data record
Near-Infrared Mapping and Physical Properties of the Dwarf-Planet Ceres
We study the physical characteristics (shape, dimensions, spin axis
direction, albedo maps, mineralogy) of the dwarf-planet Ceres based on
high-angular resolution near-infrared observations. We analyze adaptive optics
J/H/K imaging observations of Ceres performed at Keck II Observatory in
September 2002 with an equivalent spatial resolution of ~50 km. The spectral
behavior of the main geological features present on Ceres is compared with
laboratory samples. Ceres' shape can be described by an oblate spheroid (a = b
= 479.7 +/- 2.3 km, c = 444.4 +/- 2.1 km) with EQJ2000.0 spin vector
coordinates RA = 288 +/- 5 deg. and DEC = +66 +/- 5 deg. Ceres sidereal period
is measured to be 9.0741 +/- 0.0001 h. We image surface features with diameters
in the 50-180 km range and an albedo contrast of ~6% with respect to the
average Ceres albedo. The spectral behavior of the brightest regions on Ceres
is consistent with phyllosilicates and carbonate compounds. Darker isolated
regions could be related to the presence of frost.Comment: 11 pages, 8 Postscript figures, Accepted for publication in A&
A study of the time evolution of GERB shortwave calibration by comparison with CERES Edition-3A data
This study examines the evolution of the GERB-2 and GERB-1 Edition 1 shortwave radiance calibration between 2004-2007 and 2007-2012 respectively, through comparison with CERES instrument FM1 Edition 3A SSF instantaneous radiances. Two periods when simultaneous observations from both GERB-2 and GERB-1 were available, January 13th to February 11th 2007 and May 1st to May 10th 2007, are also compared. For these two overlap periods respectively, averaged over all CERES ‘unfiltered-to-filtered radiance ratio’ subsets, the GERB-1/CERES unfiltered radiance ratio is on average found to be 1.6% and 1.9% lower than the associated GERB-2/CERES unfiltered radiance ratio. Over the two longer time series the GERB/CERES unfiltered radiance ratio shows a general decrease with time for both GERB-2 and GERB-1. The rate of decrease varies through time but no significant seasonal dependence is seen. Averaged over all subsets the GERB-2/CERES unfiltered radiance ratio showed a decrease of 1.9% between June 2004 and June 2006. Between June 2007 and June 2012, the corresponding decrease in the GERB-1/CERES unfiltered radiance ratio was 6.5%. The evolution of the GERB/CERES unfiltered radiance ratio for both GERB-2 and GERB-1 shows a strong dependence on the CERES unfiltered-to-filtered radiance ratio, indicating that it is spectrally dependent. Further time-series analysis and theoretical work using simulated spectral radiance curves suggests that for GERB-1 the evolution is consistent with a darkening in the GERB shortwave spectral response function which is most pronounced at the shortest wavelengths. For GERB-2, no single spectral cause can be identified, suggesting that the evolution is likely due to a combination of several different effects
Constraining Ceres' interior from its Rotational Motion
Context. Ceres is the most massive body of the asteroid belt and contains
about 25 wt.% (weight percent) of water. Understanding its thermal evolution
and assessing its current state are major goals of the Dawn Mission.
Constraints on internal structure can be inferred from various observations.
Especially, detailed knowledge of the rotational motion can help constrain the
mass distribution inside the body, which in turn can lead to information on its
geophysical history. Aims. We investigate the signature of the interior on the
rotational motion of Ceres and discuss possible future measurements performed
by the spacecraft Dawn that will help to constrain Ceres' internal structure.
Methods. We compute the polar motion, precession-nutation, and length-of-day
variations. We estimate the amplitudes of the rigid and non-rigid response for
these various motions for models of Ceres interior constrained by recent shape
data and surface properties. Results. As a general result, the amplitudes of
oscillations in the rotation appear to be small, and their determination from
spaceborne techniques will be challenging. For example, the amplitudes of the
semi-annual and annual nutations are around ~364 and ~140 milli-arcseconds, and
they show little variation within the parametric space of interior models
envisioned for Ceres. This, combined with the very long-period of the
precession motion, requires very precise measurements. We also estimate the
timescale for Ceres' orientation to relax to a generalized Cassini State, and
we find that the tidal dissipation within that object was probably too small to
drive any significant damping of its obliquity since formation. However,
combining the shape and gravity observations by Dawn offers the prospect to
identify departures of non-hydrostaticity at the global and regional scale,
which will be instrumental in constraining Ceres' past and current thermal
state. We also discuss the existence of a possible Chandler mode in the
rotational motion of Ceres, whose potential excitation by endogenic and/or
exogenic processes may help detect the presence of liquid reservoirs within the
asteroid.Comment: submitted to Astronomy and Astrophysic
The mass of (1) Ceres from perturbations on (348) May
The most promising ground-based technique for determining the mass of a minor planet is the observation of the perturbations it induces in the motion of another minor planet. This method requires careful observation of both minor planets over extended periods of time. The mass of (1) Ceres has been determined from the perturbations on (348) May, which made three close approaches to Ceres at intervals of 46 years between 1891 and 1984. The motion of May is clearly influenced by Ceres, and by using different test masses for Ceres, a search was made to determine the mass of Ceres that minimizes the residuals in the observations of May
Evidence for ammonium-bearing minerals in Ceres
Evidence for ammonium-bearing minerals was found on the surface of the largest asteroid Ceres. The presence of ammonium-bearing clays suggests that Ceres has experienced a period of alteration by substantial amounts of an ammonium-bearing fluid. The presence of the ammonium-bearing clays does not preclude Ceres maintaining a volatile inventory in the core or in a volatile-rich zone at some distance below the surface. Telescopic observations of Ceres, using the 3.0 meter NASA Infrared telescope facility prompted this reevaluation of its surface mineralogy
- …