How Rapid is Rapid Prototyping? Analysis of ESPADON Programme Results

New methodologies, engineering processes, and support environments are beginning to emerge for embedded signal processing systems. The main objectives are to enable defence industry to field state-of-the-art products in less time and with lower costs, including retrofits and upgrades, based predominately on commercial off the shelf (COTS) components and the model-year concept. One of the cornerstones of the new methodologies is the concept of rapid prototyping. This is the ability to rapidly and seamlessly move from functional design to the architectural design to the implementation, through automatic code generation tools, onto real-time COTS test beds. In this paper, we try to quantify the term “rapid†and provide results, the metrics, from two independent benchmarks, a radar and sonar beamforming application subset. The metrics show that the rapid prototyping process may be sixteen times faster than a conventional process

Developing a distributed electronic health-record store for India

The DIGHT project is addressing the problem of building a scalable and highly available information store for the Electronic Health Records (EHRs) of the over one billion citizens of India

All in one Graphical Tool for the management of DIET a GridRPC Middleware

Also available as LIP Research Report 2008-24Grid Middleware are the link between large scale (and distributed) platforms and applications. Managing such a software system and the Grid environment itself can be a hard task when no dedicated (and integrated) tool exist. Some can be used through nice graphical interfaces, but they are usually dedicated to one or some limited tasks. They do not fulfill all the needs of a Grid end-user who wants to deploy Grid applications easily and rapidly. The aim of this paper is to present the case study of an all-in-one software system, designed for the management of a Grid Middleware and gathering user-friendly graphical interfaces answering to the various needs of end-users. Moreover the software system eases the use of the Grid by avoiding the scripting layer under a nice GUI enabling the user a faster and more efficient use of the Grid environment. By this means we demonstrate how the DietDashboard fulfills all the needs of a unified tool for Grid management. This paper gives a comparison with existing and well-known tools dedicated to some specific tasks such as Grid resources management, Grid monitoring, or Middleware management

An intelligent, free-flying robot

The ground based demonstration of the extensive extravehicular activity (EVA) Retriever, a voice-supervised, intelligent, free flying robot, is designed to evaluate the capability to retrieve objects (astronauts, equipment, and tools) which have accidentally separated from the Space Station. The major objective of the EVA Retriever Project is to design, develop, and evaluate an integrated robotic hardware and on-board software system which autonomously: (1) performs system activation and check-out; (2) searches for and acquires the target; (3) plans and executes a rendezvous while continuously tracking the target; (4) avoids stationary and moving obstacles; (5) reaches for and grapples the target; (6) returns to transfer the object; and (7) returns to base

Toward model-based engineering for space embedded systems and software

International audienceEmbedded systems development suffers from difficulties to reach cost, delay and safety requirements. The continuous increase of system complexity requires a corresponding increase in the capability of design fault-free systems. Model-based engineering aims to make complexity management easier with the construction of a virtual representation of systems enabling early prediction of behaviour and performance. In this context, Space industry has specific needs to deal with remote systems that can not be maintained on ground. In such systems, fault management includes complex detection, localisation and recovery automatic procedures that can not be performed without confidence on safety. In this way, only simulation and formal proofs can support the validation of all the possible configurations. Thus, formal description of both functional and non-functional properties with temporal logic formulae is expected to analyse and to early predict system characteristics at execution. This paper is based on various studies and experiences that are carried out in space domain on the support provided by model-based engineering in terms of: • support to needs capture and requirements analysis, • support to design, • support to early verification and validation, • down to automatic generation of code

Towards a User-Oriented Benchmark for Transport Protocols Comparison in very High Speed Networks

Standard TCP faces some performance limitations in very high speed wide area networks, mainly due to a long end-to-end feedback loop and a conservative behaviour with respect to congestion. Many TCP variants have been proposed to overcome these limitations. However, TCP is a complex protocol with many user-configurable parameters and a range of different implementations. It is then important to define measurement methods so that the transport services and protocols can evolve guided by scientific principles and compared quantitatively. The goal of this report is to present some steps towards a user-oriented benchmark, called ITB, for high speed transport protocols comparison. We first present and analyse some results reported in the literature. From this study we identify classes of representative applications and useful metrics. We then isolate infrastructure parameters and traffic factors which influence the protocol behaviour. This enable us to define scenario capturing and synthesising comprehensive and useful properties. We finally illustrate this proposal by preliminary results obtained on our experimental environment, Grid'5000, we have built and are using for contributing in this benchmark design

A Goal-Oriented Autonomous Controller for Space Exploration

The Goal-Oriented Autonomous Controller (GOAC) is the envisaged result of a multi-institutional effort within the on-going Autonomous Controller R&D activity funded by ESA ESTEC. The objective of this effort is to design, build and test a viable on-board controller to demonstrate key concepts in fully autonomous operations for ESA missions. This three-layer architecture is an integrative effort to bring together four mature technologies; for a functional layer, a verification and validation system, a planning engine and a controller framework for planning and execution which uses the sense-plan-act paradigm for goal oriented autonomy. GOAC as a result will generate plans in situ, deterministically dispatch activities for execution, and recover from off-nominal conditions

Ein mobiler Serviceroboter zur Automatisierung der Probenahme und des Probenmanagements in einem biotechnologischen Pilotlabor

Scherer T. A mobile service robot for automisation of sample taking and sample management in a biotechnological pilot laboratory. Bielefeld (Germany): Bielefeld University; 2004.In biotechnologischen Laboratorien ist die Qualität der typischerweise pharmazeutischen Produkte ein wortwörtlich lebenswichtiges Ziel. Die Qualität der Zellkultivierungen wurde historisch nur durch off-line Messungen von physikalischen Prozessparametern wie pH und pO2 sichergestellt. Biologische Parameter wie die Zelldichte und -viabilität wurden nur off-line gemessen, weil das dazu notwendige Probenmanagement hochkomplizierte Manipulationen und Analysen beinhaltet und deshalb nicht automatisiert werden konnte. Es gibt zwar mehrere automatisierte Geräte, um einem Labortechniker zu assistieren, aber kein System, welches das gesamte Probenmanagement automatisiert. In dieser Arbeit wird ein neuer Typ von Serviceroboter präsentiert, der aus einem auf einer mobilen Plattform montierten Roboterarm besteht und diese Lücke schließt. Dieser Roboter muss eine ganze Reihe von Problemen bewältigen: Er muss seine Position im Labor bestimmen können (Lokalisation), er muss eine kollisionsfreie Bahn zu den beteiligten Geräten finden können (Bahnplanung mit Hindernisvermeidung), er darf bei seinen Bewegungen keine Menschen gefährden oder Laborausrüstung beschädigen (Kollisionsvermeidung), er muss die zu bedienenden Geräte erkennen und ihre Position präzise messen können (Bildverarbeitung), er muss sie bedienen können (Armsteuerung), er muss Objekte greifen können (Greifer und Finger) und er muss sie gefügig handhaben können, um sie nicht zu beschädigen (Kraftregelung). Er muss autonom sein, um nur die allernotwendigste Menge an Benutzereingriffen zu benötigen, und doch durch ein Laborsteuerprogramm kontrollierbar sein, um Eingriffe zu erlauben. Schließlich muss er einfach durch ungeschultes Personal zu warten sein. All diese Aspekte werden von dem in dieser Arbeit präsentierten neuen Robotersystem abgedeckt.In biotechnolgical laboratories, the quality of the typically pharmaceutical product is a literally life-important goal. Historically, the quality of the cell cultivations was ensured by on-line measurements of physical process parameters like pH and pO2 only. Biological parameters like cell density and viability were only measured off-line, because the necessary sample management involves highly complicated manipulations and analyses and could therefore not be automated. Various automated devices to assist a laboratory technician do exist, but so far no system to automate the entire sample management. In this work a novel type of service robot consisting of a robot arm mounted on a mobile platform is presented that closes this gap. This robot has to master a multitude of problems: It must be able to locate its position in the laboratory (localisation), it must be able to find a collision-free path to the involved devices (path planning with obstacle avoidance), it must not endanger humans or damage laboratory equipment while moving (collision avoidance), it must be able to recognize the devices to be manipulated and measure their precise position (computer vision), it must be able to manipulate them (arm control), it must be able to grasp objects (gripper and fingers) and it must be able to handle them with compliance in order to not damage them (force control). It must be autonomous in order to only require the least possible amount of user intervention, and yet controllable by a laboratory control program in order to allow intervention. Finally, it must be easily maintainable by non-expert personell. All these aspects are covered by the novel robot system presented in this thesis