Imperfection-Aware Design of CNFET Digital VLSI Circuits

Carbon nanotube field-effect transistor (CNFET) is one of the promising candidates as extensions to silicon CMOS devices. The CNFET, which is a 1-D structure with a near-ballistic transport capability, can potentially offer excellent device characteristics and order-of-magnitude better energy-delay product over standard CMOS devices. Significant challenges in CNT synthesis prevent CNFETs today from achieving such ideal benefits. CNT density variation and metallic CNTs are the dominant type of CNT variations/imperfections that cause performance variation, large static power consumption, and yield degradation. We present an imperfection-aware design technique for CNFET digital VLSI circuits by: 1) Analytical models that are developed to analyze and quantify the effects of CNT density variation on device characteristics, gate and system levels delays. The analytical models, which were validated by comparison to real experimental/simulation data, enables us to examine the space of CNFET combinational, sequential and memory cells circuits to minimize delay variations. Using these model, we drive CNFET processing and circuit design guidelines to manage/overcome CNT density variation. 2) Analytical models that are developed to analyze the effects of metallic CNTs on device characteristics, gate and system levels delay and power consumption. Using our presented analytical models, which are again validated by comparison with simulation data, it is shown that the static power dissipation is a more critical issue than the delay and the dynamic power of CNFET circuits in the presence of m-CNTs. 3) CNT density variation and metallic CNTs can result in functional failure of CNFET circuits. The complete and compact model for CNFET probability of failure that consider CNT density variation and m-CNTs is presented. This analytical model is applied to analyze the logical functional failures. The presented model is extended to predict opportunities and limitations of CNFET technology at todays Gigascale integration and beyond.\u2

Design Methodologies and Architecture Solutions for High-Performance Interconnects

ABSTRACT In Deep Sub-Micron (DSM) technologies, interconnects play a crucial role in the correct functionality and largely impact the performance of complex System-on-Chip (SoC) designs. For technologies of 0.25µm and below, wiring capacitance dominates gate capacitance, thus rapidly increasing the interconnect-induced delay. Moreover, the coupling capacitance becomes a significant portion of the on-chip total wiring capacitance, and coupling between adjacent wires cannot be considered as a second-order effect any longer. As a consequence, the traditional top-down design methodology is ineffective, since the actual wiring delays can be computed only after layout parasitic extraction, when the physical design is completed. Fixing all the timing violations often requires several time-consuming iterations of logical and physical design, and it is essentially a trial-and-error approach. Increasingly tighter time-to-market requirements dictate that interconnect parasitics must be taken into account during all phases of the design flow, at different level of abstractions. However, given the aggressive technology scaling trends and the growing design complexity, this approach will only temporarily ameliorate the interconnect problem. We believe that in order to achieve gigascale designs in the nanometer regime, a novel design paradigm, based on new forms of regularity and newly created IP (Intellectual Property) blocks must be developed, to provide a direct path from system-level architectural exploration to physical implementation

Comparison of multi-layer bus interconnection and a network on chip solution

Abstract. This thesis explains the basic subjects that are required to take in consideration when designing a network on chip solutions in the semiconductor world. For example, general topologies such as mesh, torus, octagon and fat tree are explained. In addition, discussion related to network interfaces, switches, arbitration, flow control, routing, error avoidance and error handling are provided. Furthermore, there is discussion related to design flow, a computer aided designing tools and a few comprehensive researches. However, several networks are designed for the minimum latency, although there are also versions which trade performance for decreased bus widths. These designed networks are compared with a corresponding multi-layer bus interconnection and both synthesis and register transfer level simulations are run. For example, results from throughput, latency, logic area and power consumptions are gathered and compared. It was discovered that overall throughput was well balanced with the network on chip solutions, although its maximum throughput was limited by protocol conversions. For example, the multi-layer bus interconnection was capable of providing a few times smaller latencies and higher throughputs when only a single interface was injected at the time. However, with parallel traffic and high-performance requirements a network on chip solution provided better results, even though the difference decreased when performance requirements were lower. Furthermore, it was discovered that the network on chip solutions required approximately 3–4 times higher total cell area than the multi-layer bus interconnection and that resources were mainly located at network interfaces and switches. In addition, power consumption was approximately 2–3 times higher and was mostly caused by dynamic consumption.Monitasoisen väyläarkkitehtuurin ja tietokoneverkkomaisen ratkaisun vertailua. Tiivistelmä. Tutkielmassa käsitellään tärkeimpiä aihealueita, jotka tulee huomioida suunniteltaessa tietokoneverkkomaisia väyläratkaisuja puolijohdemaailmassa. Esimerkiksi yleiset rakenteet, kuten verkko-, torus-, kahdeksankulmio- ja puutopologiat käsitellään lyhyesti. Lisäksi alustetaan verkon liitäntäkohdat, kytkimet, vuorottelu, vuon hallinta, reititys, virheiden välttely ja -käsittely. Lopuksi kerrotaan suunnitteluvuon oleellisimmat välivaiheet ja niihin soveltuvia kaupallisia työkaluja, sekä käsitellään lyhyesti muutaman aiemman julkaisun tuloksia. Tutkielmassa käytetään suunnittelutyökalua muutaman tietokoneverkkomaisen ratkaisun toteutukseen ja tavoitteena on saavuttaa pienin mahdollinen latenssi. Toisaalta myös hieman suuremman latenssin versioita suunnitellaan, mutta pienemmillä väylänleveyksillä. Lisäksi suunniteltuja tietokoneverkkomaisia ratkaisuja vertaillaan perinteisempään monitasoiseen väyläarkkitehtuuriin. Esimerkiksi synteesi- ja simulaatiotuloksia, kuten logiikan vaatimaa pinta-alaa, tehonkulutusta, latenssia ja suorituskykyä, vertaillaan keskenään. Tutkielmassa selvisi, että suunnittelutyökalulla toteutetut tietokoneverkkomaiset ratkaisut mahdollistivat tasaisemman suorituskyvyn, joskin niiden suurin saavutettu suorituskyky ja pienin latenssi määräytyivät protokollan käännöksen aiheuttamasta viiveestä. Tutkielmassa havaittiin, että perinteisemmillä menetelmillä saavutettiin noin kaksi kertaa suurempi suorituskyky ja pienempi latenssi, kun verkossa ei ollut muuta liikennettä. Rinnakkaisen liikenteen lisääntyessä tietokoneverkkomainen ratkaisu tarjosi keskimäärin paremman suorituskyvyn, kun sille asetetut tehokkuusvaateet olivat suuret, mutta suorituskykyvaatimuksien laskiessa erot kapenivat. Lisäksi huomattiin, että tietokoneverkkomaisten ratkaisujen käyttämä pinta-ala oli noin 3–4 kertaa suurempi kuin monitasoisella väyläarkkitehtuurilla ja että resurssit sijaitsivat enimmäkseen verkon liittymäkohdissa ja kytkimissä. Lisäksi tehonkulutuksen huomattiin olevan noin 2–3 kertaa suurempi, joskin sen havaittiin koostuvan pääosin dynaamisesta kulutuksesta

Physical Design of Optoelectronic System-on-a-Chip/Package Using Electrical and Optical Interconnects: CAD Tools and Algorithms

Current electrical systems are faced with the limitation in performance by the electrical interconnect technology determining overall processing speed. In addition, the electrical interconnects containing many long distance interconnects require high power to drive. One of the best ways to overcome these bottlenecks is through the use of optical interconnect to limit interconnect latency and power. This research explores new computer-aided design algorithms for developing optoelectronic systems. These algorithms focus on place and route problems using optical interconnections covering system-on-a-chip design as well as system-on-a-package design. In order to design optoelectronic systems, optical interconnection models are developed at first. The CAD algorithms include optical interconnection models and solve place and route problems for optoelectronic systems. The MCNC and GSRC benchmark circuits are used to evaluate these algorithms.Ph.D.Committee Chair: Abhijit Chatterjee; Committee Member: C. P. Wong; Committee Member: David E. Schimmel; Committee Member: John A. Buck; Committee Member: Madhavan Swaminatha

Understanding multidimensional verification: Where functional meets non-functional

Abstract Advancements in electronic systems' design have a notable impact on design verification technologies. The recent paradigms of Internet-of-Things (IoT) and Cyber-Physical Systems (CPS) assume devices immersed in physical environments, significantly constrained in resources and expected to provide levels of security, privacy, reliability, performance and low-power features. In recent years, numerous extra-functional aspects of electronic systems were brought to the front and imply verification of hardware design models in multidimensional space along with the functional concerns of the target system. However, different from the software domain such a holistic approach remains underdeveloped. The contributions of this paper are a taxonomy for multidimensional hardware verification aspects, a state-of-the-art survey of related research works and trends enabling the multidimensional verification concept. Further, an initial approach to perform multidimensional verification based on machine learning techniques is evaluated. The importance and challenge of performing multidimensional verification is illustrated by an example case study

Carbon nanotubes as interconnect for next generation network on chip

Multi-core processors provide better performance when compared with their single-core equivalent. Recently, Networks-on-Chip (NoC) have emerged as a communication methodology for multi core chips. Network-on-Chip uses packet based communication for establishing a communication path between multiple cores connected via interconnects. Clock frequency, energy consumption and chip size are largely determined by these interconnects. According to the International Technology Roadmap for Semiconductors (ITRS), in the next five years up to 80% of microprocessor power will be consumed by interconnects. In the sub 100nm scaling range, interconnect behavior limits the performance and correctness of VLSI systems. The performance of copper interconnects tend to get reduced in the sub 100nm range and hence we need to examine other interconnect options. Single Wall Carbon Nanotubes exhibit better performance in sub 100nm processing technology due to their very large current carrying capacity and large electron mean free paths. This work suggests using Single Wall Carbon Nanotubes (SWCNT) as interconnects for Networks-on-Chip as they consume less energy and gives more throughput and bandwidth when compared with traditional Copper wires

Network Interface Design for Network-on-Chip

In the culture of globalized integrated circuit (IC, a.k.a chip) production, the use of Intellectual Property (IP) cores, computer aided design tools (CAD) and testing services from un-trusted vendors are prevalent to reduce the time to market. Unfortunately, the globalized business model potentially creates opportunities for hardware tampering and modification from adversary, and this tampering is known as hardware Trojan (HT). Network-on-chip (NoC) has emerged as an efficient on-chip communication infrastructure. In this work, the security aspects of NoC network interface (NI), one of the most critical components in NoC will be investigated and presented. Particularly, the NI design, hardware attack models and countermeasures for NI in a NoC system are explored. An OCP compatible NI is implemented in an IBM0.18ìm CMOS technology. The synthesis results are presented and compared with existing literature. Second, comprehensive hardware attack models targeted for NI are presented from system level to circuit level. The impact of hardware Trojans on NoC functionality and performance are evaluated. Finally, a countermeasure method is proposed to address the hardware attacks in NIs

Circuit paradigm in the 21

reviewe