Energy Model of Networks-on-Chip and a Bus

A Network-on-Chip (NoC) is an energy-efficient onchip communication architecture for Multi-Processor Systemon-Chip (MPSoC) architectures. In earlier papers we proposed two Network-on-Chip architectures based on packet-switching and circuit-switching. In this paper we derive an energy model for both NoC architectures to predict their energy consumption per transported bit. Both architectures are also compared with a traditional bus architecture. The energy model is primarily needed to find a near optimal run-time mapping (from an energy point of view) of inter-process communication to NoC link

Driving the Network-on-Chip Revolution to Remove the Interconnect Bottleneck in Nanoscale Multi-Processor Systems-on-Chip

The sustained demand for faster, more powerful chips has been met by the availability of chip manufacturing processes allowing for the integration of increasing numbers of computation units onto a single die. The resulting outcome, especially in the embedded domain, has often been called SYSTEM-ON-CHIP (SoC) or MULTI-PROCESSOR SYSTEM-ON-CHIP (MP-SoC). MPSoC design brings to the foreground a large number of challenges, one of the most prominent of which is the design of the chip interconnection. With a number of on-chip blocks presently ranging in the tens, and quickly approaching the hundreds, the novel issue of how to best provide on-chip communication resources is clearly felt. NETWORKS-ON-CHIPS (NoCs) are the most comprehensive and scalable answer to this design concern. By bringing large-scale networking concepts to the on-chip domain, they guarantee a structured answer to present and future communication requirements. The point-to-point connection and packet switching paradigms they involve are also of great help in minimizing wiring overhead and physical routing issues. However, as with any technology of recent inception, NoC design is still an evolving discipline. Several main areas of interest require deep investigation for NoCs to become viable solutions: • The design of the NoC architecture needs to strike the best tradeoff among performance, features and the tight area and power constraints of the onchip domain. • Simulation and verification infrastructure must be put in place to explore, validate and optimize the NoC performance. • NoCs offer a huge design space, thanks to their extreme customizability in terms of topology and architectural parameters. Design tools are needed to prune this space and pick the best solutions. • Even more so given their global, distributed nature, it is essential to evaluate the physical implementation of NoCs to evaluate their suitability for next-generation designs and their area and power costs. This dissertation performs a design space exploration of network-on-chip architectures, in order to point-out the trade-offs associated with the design of each individual network building blocks and with the design of network topology overall. The design space exploration is preceded by a comparative analysis of state-of-the-art interconnect fabrics with themselves and with early networkon- chip prototypes. The ultimate objective is to point out the key advantages that NoC realizations provide with respect to state-of-the-art communication infrastructures and to point out the challenges that lie ahead in order to make this new interconnect technology come true. Among these latter, technologyrelated challenges are emerging that call for dedicated design techniques at all levels of the design hierarchy. In particular, leakage power dissipation, containment of process variations and of their effects. The achievement of the above objectives was enabled by means of a NoC simulation environment for cycleaccurate modelling and simulation and by means of a back-end facility for the study of NoC physical implementation effects. Overall, all the results provided by this work have been validated on actual silicon layout

NullHop: A Flexible Convolutional Neural Network Accelerator Based on Sparse Representations of Feature Maps

Convolutional neural networks (CNNs) have become the dominant neural network architecture for solving many state-of-the-art (SOA) visual processing tasks. Even though Graphical Processing Units (GPUs) are most often used in training and deploying CNNs, their power efficiency is less than 10 GOp/s/W for single-frame runtime inference. We propose a flexible and efficient CNN accelerator architecture called NullHop that implements SOA CNNs useful for low-power and low-latency application scenarios. NullHop exploits the sparsity of neuron activations in CNNs to accelerate the computation and reduce memory requirements. The flexible architecture allows high utilization of available computing resources across kernel sizes ranging from 1x1 to 7x7. NullHop can process up to 128 input and 128 output feature maps per layer in a single pass. We implemented the proposed architecture on a Xilinx Zynq FPGA platform and present results showing how our implementation reduces external memory transfers and compute time in five different CNNs ranging from small ones up to the widely known large VGG16 and VGG19 CNNs. Post-synthesis simulations using Mentor Modelsim in a 28nm process with a clock frequency of 500 MHz show that the VGG19 network achieves over 450 GOp/s. By exploiting sparsity, NullHop achieves an efficiency of 368%, maintains over 98% utilization of the MAC units, and achieves a power efficiency of over 3TOp/s/W in a core area of 6.3mm$^2$. As further proof of NullHop's usability, we interfaced its FPGA implementation with a neuromorphic event camera for real time interactive demonstrations

A time-predictable many-core processor design for critical real-time embedded systems

Critical Real-Time Embedded Systems (CRTES) are in charge of controlling fundamental parts of embedded system, e.g. energy harvesting solar panels in satellites, steering and breaking in cars, or flight management systems in airplanes. To do so, CRTES require strong evidence of correct functional and timing behavior. The former guarantees that the system operates correctly in response of its inputs; the latter ensures that its operations are performed within a predefined time budget. CRTES aim at increasing the number and complexity of functions. Examples include the incorporation of \smarter" Advanced Driver Assistance System (ADAS) functionality in modern cars or advanced collision avoidance systems in Unmanned Aerial Vehicles (UAVs). All these new features, implemented in software, lead to an exponential growth in both performance requirements and software development complexity. Furthermore, there is a strong need to integrate multiple functions into the same computing platform to reduce the number of processing units, mass and space requirements, etc. Overall, there is a clear need to increase the computing power of current CRTES in order to support new sophisticated and complex functionality, and integrate multiple systems into a single platform. The use of multi- and many-core processor architectures is increasingly seen in the CRTES industry as the solution to cope with the performance demand and cost constraints of future CRTES. Many-cores supply higher performance by exploiting the parallelism of applications while providing a better performance per watt as cores are maintained simpler with respect to complex single-core processors. Moreover, the parallelization capabilities allow scheduling multiple functions into the same processor, maximizing the hardware utilization. However, the use of multi- and many-cores in CRTES also brings a number of challenges related to provide evidence about the correct operation of the system, especially in the timing domain. Hence, despite the advantages of many-cores and the fact that they are nowadays a reality in the embedded domain (e.g. Kalray MPPA, Freescale NXP P4080, TI Keystone II), their use in CRTES still requires finding efficient ways of providing reliable evidence about the correct operation of the system. This thesis investigates the use of many-core processors in CRTES as a means to satisfy performance demands of future complex applications while providing the necessary timing guarantees. To do so, this thesis contributes to advance the state-of-the-art towards the exploitation of parallel capabilities of many-cores in CRTES contributing in two different computing domains. From the hardware domain, this thesis proposes new many-core designs that enable deriving reliable and tight timing guarantees. From the software domain, we present efficient scheduling and timing analysis techniques to exploit the parallelization capabilities of many-core architectures and to derive tight and trustworthy Worst-Case Execution Time (WCET) estimates of CRTES.Los sistemas críticos empotrados de tiempo real (en ingles Critical Real-Time Embedded Systems, CRTES) se encargan de controlar partes fundamentales de los sistemas integrados, e.g. obtención de la energía de los paneles solares en satélites, la dirección y frenado en automóviles, o el control de vuelo en aviones. Para hacerlo, CRTES requieren fuerte evidencias del correcto comportamiento funcional y temporal. El primero garantiza que el sistema funciona correctamente en respuesta de sus entradas; el último asegura que sus operaciones se realizan dentro de unos limites temporales establecidos previamente. El objetivo de los CRTES es aumentar el número y la complejidad de las funciones. Algunos ejemplos incluyen los sistemas inteligentes de asistencia a la conducción en automóviles modernos o los sistemas avanzados de prevención de colisiones en vehiculos aereos no tripulados. Todas estas nuevas características, implementadas en software,conducen a un crecimiento exponencial tanto en los requerimientos de rendimiento como en la complejidad de desarrollo de software. Además, existe una gran necesidad de integrar múltiples funciones en una sóla plataforma para así reducir el número de unidades de procesamiento, cumplir con requisitos de peso y espacio, etc. En general, hay una clara necesidad de aumentar la potencia de cómputo de los actuales CRTES para soportar nueva funcionalidades sofisticadas y complejas e integrar múltiples sistemas en una sola plataforma. El uso de arquitecturas multi- y many-core se ve cada vez más en la industria CRTES como la solución para hacer frente a la demanda de mayor rendimiento y las limitaciones de costes de los futuros CRTES. Las arquitecturas many-core proporcionan un mayor rendimiento explotando el paralelismo de aplicaciones al tiempo que proporciona un mejor rendimiento por vatio ya que los cores se mantienen más simples con respecto a complejos procesadores de un solo core. Además, las capacidades de paralelización permiten programar múltiples funciones en el mismo procesador, maximizando la utilización del hardware. Sin embargo, el uso de multi- y many-core en CRTES también acarrea ciertos desafíos relacionados con la aportación de evidencias sobre el correcto funcionamiento del sistema, especialmente en el ámbito temporal. Por eso, a pesar de las ventajas de los procesadores many-core y del hecho de que éstos son una realidad en los sitemas integrados (por ejemplo Kalray MPPA, Freescale NXP P4080, TI Keystone II), su uso en CRTES aún precisa de la búsqueda de métodos eficientes para proveer evidencias fiables sobre el correcto funcionamiento del sistema. Esta tesis ahonda en el uso de procesadores many-core en CRTES como un medio para satisfacer los requisitos de rendimiento de aplicaciones complejas mientras proveen las garantías de tiempo necesarias. Para ello, esta tesis contribuye en el avance del estado del arte hacia la explotación de many-cores en CRTES en dos ámbitos de la computación. En el ámbito del hardware, esta tesis propone nuevos diseños many-core que posibilitan garantías de tiempo fiables y precisas. En el ámbito del software, la tesis presenta técnicas eficientes para la planificación de tareas y el análisis de tiempo para aprovechar las capacidades de paralelización en arquitecturas many-core, y también para derivar estimaciones de peor tiempo de ejecución (Worst-Case Execution Time, WCET) fiables y precisas

An Energy-Efficient Reconfigurable Circuit Switched Network-on-Chip

Network-on-Chip (NoC) is an energy-efficient on-chip communication architecture for multi-tile System-on-Chip (SoC) architectures. The SoC architecture, including its run-time software, can replace inflexible ASICs for future ambient systems. These ambient systems have to be flexible as well as energy-efficient. To find an energy-efficient solution for the communication network we analyze three wireless applications. Based on their communication requirements we observe that revisiting of the circuit switching techniques is beneficial. In this paper we propose a new energy-efficient reconfigurable circuit-switched Network-on-Chip. By physically separating the concurrent data streams we reduce the overall energy consumption. The circuit-switched router has been synthesized and analyzed for its power consumption in 0.13 ¿m technology. A 5-port circuit-switched router has an area of 0.05 mm2 and runs at 1075 MHz. The proposed architecture consumes 3.5 times less energy compared to its packet-switched equivalen

A Model-Based Development and Verification Framework for Distributed System-on-Chip Architecture

The capabilities and thus, design complexity of VLSI-based embedded systems have increased tremendously in recent years, riding the wave of Moore’s law. The time-to-market requirements are also shrinking, imposing challenges to the designers, which in turn, seek to adopt new design methods to increase their productivity. As an answer to these new pressures, modern day systems have moved towards on-chip multiprocessing technologies. New architectures have emerged in on-chip multiprocessing in order to utilize the tremendous advances of fabrication technology. Platform-based design is a possible solution in addressing these challenges. The principle behind the approach is to separate the functionality of an application from the organization and communication architecture of hardware platform at several levels of abstraction. The existing design methodologies pertaining to platform-based design approach don’t provide full automation at every level of the design processes, and sometimes, the co-design of platform-based systems lead to sub-optimal systems. In addition, the design productivity gap in multiprocessor systems remain a key challenge due to existing design methodologies. This thesis addresses the aforementioned challenges and discusses the creation of a development framework for a platform-based system design, in the context of the SegBus platform - a distributed communication architecture. This research aims to provide automated procedures for platform design and application mapping. Structural verification support is also featured thus ensuring correct-by-design platforms. The solution is based on a model-based process. Both the platform and the application are modeled using the Unified Modeling Language. This thesis develops a Domain Specific Language to support platform modeling based on a corresponding UML profile. Object Constraint Language constraints are used to support structurally correct platform construction. An emulator is thus introduced to allow as much as possible accurate performance estimation of the solution, at high abstraction levels. VHDL code is automatically generated, in the form of “snippets” to be employed in the arbiter modules of the platform, as required by the application. The resulting framework is applied in building an actual design solution for an MP3 stereo audio decoder application.Siirretty Doriast

A Multi-core processor for hard real-time systems

The increasing demand for new functionalities in current and future hard real-time embedded systems, like the ones deployed in automotive and avionics industries, is driving an increment in the performance required in current embedded processors. Multi-core processors represent a good design solution to cope with such higher performance requirements due to their better performance-per-watt ratio while maintaining the core design simple. Moreover, multi-cores also allow executing mixed-criticality level workloads composed of tasks with and without hard real-time requirements, maximizing the utilization of the hardware resources while guaranteeing low cost and low power consumption. Despite those benefits, current multi-core processors are less analyzable than single-core ones due to the interferences between different tasks when accessing hardware shared resources. As a result, estimating a meaningful Worst-Case Execution Time (WCET) estimation - i.e. to compute an upper bound of the application's execution time - becomes extremely difficult, if not even impossible, because the execution time of a task may change depending on the other threads running at the same time. This makes the WCET of a task dependent on the set of inter-task interferences introduced by the co-running tasks. Providing a WCET estimation independent from the other tasks (time composability property) is a key requirement in hard real-time systems. This thesis proposes a new multi-core processor design in which time composability is achieved, hence enabling the use of multi-cores in hard real-time systems. With our proposals the WCET estimation of a HRT is independent from the other co-running tasks. To that end, we design a multi-core processor in which the maximum delay a request from a Hard Real-time Task (HRT), accessing a hardware shared resource can suffer due to other tasks is bounded: our processor guarantees that a request to a shared resource cannot be delayed longer than a given Upper Bound Delay (UBD). In addition, the UBD allows identifying the impact that different processor configurations may have on the WCET by determining the sensitivity of a HRT to different resource allocations. This thesis proposes an off-line task allocation algorithm (called IA3: Interference-Aware Allocation Algorithm), that allocates tasks in a task set based on the HRT's sensitivity to different resource allocations. As a result the hardware shared resources used by HRTs are minimized, by allowing Non Hard Real-time Tasks (NHRTs) to use the rest of resources. Overall, our proposals provide analyzability for the HRTs allowing NHRTs to be executed into the same chip without any effect on the HRTs. The previous first two proposals of this thesis focused on supporting the execution of multi-programmed workloads with mixed-criticality levels (composed of HRTs and NHRTs). Higher performance could be achieved by implementing multi-threaded applications. As a first step towards supporting hard real-time parallel applications, this thesis proposes a new hardware/software approach to guarantee a predictable execution of software pipelined parallel programs. This thesis also investigates a solution to verify the timing correctness of HRTs without requiring any modification in the core design: we design a hardware unit which is interfaced with the processor and integrated into a functional-safety aware methodology. This unit monitors the execution time of a block of instructions and it detects if it exceeds the WCET. Concretely, we show how to handle timing faults on a real industrial automotive platform.La creciente demanda de nuevas funcionalidades en los sistemas empotrados de tiempo real actuales y futuros en industrias como la automovilística y la de aviación, está impulsando un incremento en el rendimiento necesario en los actuales procesadores empotrados. Los procesadores multi-núcleo son una solución eficiente para obtener un mayor rendimiento ya que aumentan el rendimiento por vatio, manteniendo el diseño del núcleo simple. Por otra parte, los procesadores multi-núcleo también permiten ejecutar cargas de trabajo con niveles de tiempo real mixtas (formadas por tareas de tiempo real duro y laxo así como tareas sin requerimientos de tiempo real), maximizando así la utilización de los recursos de procesador y garantizando el bajo consumo de energía. Sin embargo, a pesar los beneficios mencionados anteriormente, los actuales procesadores multi-núcleo son menos analizables que los de un solo núcleo debido a las interferencias surgidas cuando múltiples tareas acceden simultáneamente a los recursos compartidos del procesador. Como resultado, la estimación del peor tiempo de ejecución (conocido como WCET) - es decir, una cota superior del tiempo de ejecución de la aplicación - se convierte en extremadamente difícil, si no imposible, porque el tiempo de ejecución de una tarea puede cambiar dependiendo de las otras tareas que se estén ejecutando concurrentemente. Determinar una estimación del WCET independiente de las otras tareas es un requisito clave en los sistemas empotrados de tiempo real duro. Esta tesis propone un nuevo diseño de procesador multi-núcleo en el que el tiempo de ejecución de las tareas se puede componer, lo que permitirá el uso de procesadores multi-núcleo en los sistemas de tiempo real duro. Para ello, diseñamos un procesador multi-núcleo en el que la máxima demora que puede sufrir una petición de una tarea de tiempo real duro (HRT) para acceder a un recurso hardware compartido debido a otras tareas está acotado, tiene un límite superior (UBD). Además, UBD permite identificar el impacto que las diferentes posibles configuraciones del procesador pueden tener en el WCET, mediante la determinación de la sensibilidad en la variación del tiempo de ejecución de diferentes reservas de recursos del procesador. Esta tesis propone un algoritmo estático de reserva de recursos (llamado IA3), que asigna tareas a núcleos en función de dicha sensibilidad. Como resultado los recursos compartidos del procesador usados por tareas HRT se reducen al mínimo, permitiendo que las tareas sin requerimiento de tiempo real (NHRTs) puedas beneficiarse del resto de recursos. Por lo tanto, las propuestas presentadas en esta tesis permiten el análisis del WCET para tareas HRT, permitiendo así mismo la ejecución de tareas NHRTs en el mismo procesador multi-núcleo, sin que estas tengan ningún efecto sobre las tareas HRT. Las propuestas presentadas anteriormente se centran en el soporte a la ejecución de múltiples cargas de trabajo con diferentes niveles de tiempo real (HRT y NHRTs). Sin embargo, un mayor rendimiento puede lograrse mediante la transformación una tarea en múltiples sub-tareas paralelas. Esta tesis propone una nueva técnica, con soporte del procesador y del sistema operativo, que garantiza una ejecución analizable del modelo de ejecución paralela software pipelining. Esta tesis también investiga una solución para verificar la corrección del WCET de HRT sin necesidad de ninguna modificación en el diseño de la base: un nuevo componente externo al procesador se conecta a este sin necesidad de modificarlo. Esta nueva unidad monitorea el tiempo de ejecución de un bloque de instrucciones y detecta si se excede el WCET. Esta unidad permite detectar fallos de sincronización en sistemas de computación utilizados en automóviles

Measuring and Controlling Multicore Contention in a RISC-V System-on-Chip

[ES] Los procesadores multinúcleo empezaron una revolución en el cómputo moderno cuando fueron introducidos en el espacio de cómputo comercial y de consumidor. Estos procesadores multinúcleo presentaban un aumento significativo en consumo, eficiencia y rendimiento en un periodo de tiempo en el aumento de la frecuencia y el IPC del procesador parecía estar tocando techo. Sin embargo, en sistemas críticos, la introducción de los procesadores multinúcleo ha traído a la luz diferentes dificultades en el proceso de certificación. La principal área que dificulta la caracterización de los sistemas multicore en tiempo real es el uso de recursos compartidos, en específico, los buses compartidos. En este trabajo proveeremos las herramientas necesarias para facilitar la caracterización de sistemas que hacen uso de buses compartidos en sistemas de criticidad mixta. En específico, combinamos las políticas desarrolladas para sistemas con buses con políticas de limitación de ancho de banda basadas en interferencia causada al núcleo principal. Con esta combinación de políticas podemos limitar el WCET de la tarea crítica en el sistema multinúcleo mientras que proveemos un "best effort" para permitir el progreso en los núcleos secundarios.[CAT] Els processadors multinucli van començar una revolució en el còmput modern quan van ser introduïts en l’espai de còmput comercial i de consumidor. Aquests processadors multinucli presentaven un augment significatiu en consum, eficiència i rendiment en un període de temps en l’augment de la freqüència i l’IPC de l’processador semblava estar tocant sostre. No obstant això, en sistemes crítics, la introducció dels processadors multi- nucli ha portat a la llum diferents dificultats en el procés de certificació. La principal àrea que dificulta la caracterització dels sistemes multinucli en temps real és l’ús de recursos compartits, en específic, els busos compartits. En aquest treball proveirem les eines necessàries per facilitar la caracterització de sis- temes que fan ús de busos compartits en sistemes de criticitat mixta. En específic, combi- nem les polítiques desenvolupades per a sistemes amb busos amb polítiques de limitació d’ample de banda basades en interferència causada a el nucli principal. Amb aquesta combinació de polítiques podem limitar l’WCET de la tasca crítica en el sistema multinu- cli mentre que proveïm un "best effort"per permetre el progrés en els nuclis secundaris.[EN] Multicore processors were a revolution when introduced into the commercial computing space, they presented great power efficiency and performance in a time where clock speeds and instruction level parallelism were plateauing. But, on safety critical systems, the introduction of multi-core processors has brought serious difficulties to the certification process. The main trouble spot for multicore characterization is the usage of shared resources, in specific, shared buses. In this work, we provide tools to ease the characterization of shared bus mechanisms timing interference on critical and mixed criticality systems. In particular, we combine shared bus arbitration policies with rate limiting policies based on critical workload interference to bound the WCET of a critical workload on a multi-core system while doing a best effort to let secondary cores progress as much as possible.Andreu Cerezo, P. (2021). Measuring and Controlling Multicore Contention in a RISC-V System-on-Chip. Universitat Politècnica de València. http://hdl.handle.net/10251/173563TFG

Baseband analog front-end and digital back-end for reconfigurable multi-standard terminals

Multimedia applications are driving wireless network operators to add high-speed data services such as Edge (E-GPRS), WCDMA (UMTS) and WLAN (IEEE 802.11a,b,g) to the existing GSM network. This creates the need for multi-mode cellular handsets that support a wide range of communication standards, each with a different RF frequency, signal bandwidth, modulation scheme etc. This in turn generates several design challenges for the analog and digital building blocks of the physical layer. In addition to the above-mentioned protocols, mobile devices often include Bluetooth, GPS, FM-radio and TV services that can work concurrently with data and voice communication. Multi-mode, multi-band, and multi-standard mobile terminals must satisfy all these different requirements. Sharing and/or switching transceiver building blocks in these handsets is mandatory in order to extend battery life and/or reduce cost. Only adaptive circuits that are able to reconfigure themselves within the handover time can meet the design requirements of a single receiver or transmitter covering all the different standards while ensuring seamless inter-interoperability. This paper presents analog and digital base-band circuits that are able to support GSM (with Edge), WCDMA (UMTS), WLAN and Bluetooth using reconfigurable building blocks. The blocks can trade off power consumption for performance on the fly, depending on the standard to be supported and the required QoS (Quality of Service) leve