Robotics software frameworks for multi-agent robotic systems development

Robotics is an area of research in which the paradigm of Multi-Agent Systems (MAS) can prove to be highly useful. Multi-Agent Systems come in the form of cooperative robots in a team, sensor networks based on mobile robots, and robots in Intelligent Environments, to name but a few. However, the development of Multi-Agent Robotic Systems (MARS) still presents major challenges. Over the past decade, a high number of Robotics Software Frameworks (RSFs) have appeared which propose some solutions to the most recurrent problems in robotics. Some of these frameworks, such as ROS, YARP, OROCOS, ORCA, Open-RTM, and Open-RDK, possess certain characteristics and provide the basic infrastructure necessary for the development of MARS. The contribution of this work is the identification of such characteristics as well as the analysis of these frameworks in comparison with the general-purpose Multi-Agent System Frameworks (MASFs), such as JADE and Mobile-C.Ministerio de Ciencia e Innovación TEC2009-10639-C04-02Junta de Andalucía P06-TIC-2298Junta de Andalucía P08-TIC-0386

Service Oriented Robotic Architecture for Space Robotics: Design, Testing, and Lessons Learned

This paper presents the lessons learned from six years of experiments with planetary rover prototypes running the Service Oriented Robotic Architecture (SORA) developed by the Intelligent Robotics Group (IRG) at the NASA Ames Research Center. SORA relies on proven software engineering methods and technologies applied to space robotics. Based on a Service Oriented Architecture and robust middleware, SORA encompasses on-board robot control and a full suite of software tools necessary for remotely operated exploration missions. SORA has been eld tested in numerous scenarios of robotic lunar and planetary exploration. The experiments conducted by IRG with SORA exercise a large set of the constraints encountered in space applications: remote robotic assets, ight relevant science instruments, distributed operations, high network latencies and unreliable or intermittent communication links. In this paper, we present the results of these eld tests in regard to the developed architecture, and discuss its bene ts and limitations

Developing a person guidance module for hospital robots

This dissertation describes the design and implementation of the Person Guidance Module (PGM) that enables the IWARD (Intelligent Robot Swarm for attendance, Recognition, Cleaning and delivery) base robot to offer route guidance service to the patients or visitors inside the hospital arena. One of the common problems encountered in huge hospital buildings today is foreigners not being able to find their way around in the hospital. Although there are a variety of guide robots currently existing on the market and offering a wide range of guidance and related activities, they do not fit into the modular concept of the IWARD project. The PGM features a robust and foolproof non-hierarchical sensor fusion approach of an active RFID, stereovision and cricket mote sensor for guiding a patient to the X-ray room, or a visitor to a patient’s ward in every possible scenario in a complex, dynamic and crowded hospital environment. Moreover, the speed of the robot can be adjusted automatically according to the pace of the follower for physical comfort using this system. Furthermore, the module performs these tasks in any unconstructed environment solely from a robot’s onboard perceptual resources in order to limit the hardware installation costs and therefore the indoor setting support. Similar comprehensive solution in one single platform has remained elusive in existing literature. The finished module can be connected to any IWARD base robot using quick-change mechanical connections and standard electrical connections. The PGM module box is equipped with a Gumstix embedded computer for all module computing which is powered up automatically once the module box is inserted into the robot. In line with the general software architecture of the IWARD project, all software modules are developed as Orca2 components and cross-complied for Gumstix’s XScale processor. To support standardized communication between different software components, Internet Communications Engine (Ice) has been used as middleware. Additionally, plug-and-play capabilities have been developed and incorporated so that swarm system is aware at all times of which robot is equipped with PGM. Finally, in several field trials in hospital environments, the person guidance module has shown its suitability for a challenging real-world application as well as the necessary user acceptance

Robotics for urban search and rescue

This paper describes a team of robots that are designed for urban search and rescue applications. The team CASualty consists of four tele-operated robots and one autonomous robot. A brief description of the capabilities of the robot team is presented together with the details of capabilities of the autonomous robot HOMER. In particular, the software architecture, user interface, strategies used for mapping, exploration and the identification of human victims present in the environment are described. The team participated in an international competition on urban search and rescue (RoboCup Rescue) held in Bremen, Germany in June 2006 where HOMER was placed second in the autonomy challeng

Master of Science

thesisThis thesis details the development of the Algorithmic Robotics Laboratory, its experimental software environment, and a case study featuring a novel hardware validation of optimal reciprocal collision avoidance. We constructed a robotics laboratory in both software and hardware in which to perform our experiments. This lab features a netted flying volume with motion capture and two custom quadrotors. Also, two experimental software architectures are developed for actuating both ground and aerial robots within a Linux Robot Operating System environment. The first of the frameworks is based upon a single finite state machine program which managed each aspect of the experiment. Concerns about the complexity and reconfigurability of the finite state machine prompted the development of a second framework. This final framework is a multimodal structure featuring programs which focus on these specific functions: State Estimation, Robot Drivers, Experimental Controllers, Inputs, Human Robot Interaction, and a program tailored to the specifics of the algorithm tested in the experiment. These modular frameworks were used to fulfill the mission of the Algorithmic Robotics Lab, in that they were developed to validate robotics algorithms in experiments that were previously only shown in simulation. A case study into collision avoidance was used to mark the foundation of the laboratory through the proving of an optimal reciprocal collision avoidance algorithm for the first time in hardware. In the case study, two human-controlled quadrotors were maliciously flown in colliding trajectories. Optimal reciprocal collision avoidance was demonstrated for the first time on completely independent agents with local sensing. The algorithm was shown to be robust to violations of its inherent assumptions about the dynamics of agents and the ability for those agents to sense imminent collisions. These experiments, in addition to the mathematical foundation of exponential convergence, submits th a t optimal reciprocal collision avoidance is a viable method for holonomic robots in both 2-D and 3-D with noisy sensing. A basis for the idea of reciprocal dance, a motion often seen in human collision avoidance, is also suggested in demonstration to be a product of uncertainty about the state of incoming agents. In the more than one hundred tests conducted in multiple environments, no midair collisions were ever produced

Distributed Control Architecture

This document describes the development and testing of a novel Distributed Control Architecture (DCA). The DCA developed during the study is an attempt to turn the components used to construct unmanned vehicles into a network of intelligent devices, connected using standard networking protocols. The architecture exists at both a hardware and software level and provides a communication channel between control modules, actuators and sensors. A single unified mechanism for connecting sensors and actuators to the control software will reduce the technical knowledge required by platform integrators and allow control systems to be rapidly constructed in a Plug and Play manner. DCA uses standard networking hardware to connect components, removing the need for custom communication channels between individual sensors and actuators. The use of a common architecture for the communication between components should make it easier for software to dynamically determine the vehicle s current capabilities and increase the range of processing platforms that can be utilised. Implementations of the architecture currently exist for Microsoft Windows, Windows Mobile 5, Linux and Microchip dsPIC30 microcontrollers. Conceptually, DCA exposes the functionality of each networked device as objects with interfaces and associated methods. Allowing each object to expose multiple interfaces allows for future upgrades without breaking existing code. In addition, the use of common interfaces should help facilitate component reuse, unit testing and make it easier to write generic reusable software