AROMA: Automatic Generation of Radio Maps for Localization Systems

WLAN localization has become an active research field recently. Due to the wide WLAN deployment, WLAN localization provides ubiquitous coverage and adds to the value of the wireless network by providing the location of its users without using any additional hardware. However, WLAN localization systems usually require constructing a radio map, which is a major barrier of WLAN localization systems' deployment. The radio map stores information about the signal strength from different signal strength streams at selected locations in the site of interest. Typical construction of a radio map involves measurements and calibrations making it a tedious and time-consuming operation. In this paper, we present the AROMA system that automatically constructs accurate active and passive radio maps for both device-based and device-free WLAN localization systems. AROMA has three main goals: high accuracy, low computational requirements, and minimum user overhead. To achieve high accuracy, AROMA uses 3D ray tracing enhanced with the uniform theory of diffraction (UTD) to model the electric field behavior and the human shadowing effect. AROMA also automates a number of routine tasks, such as importing building models and automatic sampling of the area of interest, to reduce the user's overhead. Finally, AROMA uses a number of optimization techniques to reduce the computational requirements. We present our system architecture and describe the details of its different components that allow AROMA to achieve its goals. We evaluate AROMA in two different testbeds. Our experiments show that the predicted signal strength differs from the measurements by a maximum average absolute error of 3.18 dBm achieving a maximum localization error of 2.44m for both the device-based and device-free cases.Comment: 14 pages, 17 figure

Performance evaluation of broadband fixed wireless system based on IEEE 802.16

Fixed Wireless Access systems operating below 11 GHz have the potential to provide broadband wireless access for non line-of-sight operation. In this paper the performance of a typical broadband fixed wireless system based on the IEEE 802.16-2004 specifications is determined. A scenario for business applications with outdoor customer premises equipment is investigated in the 3.5 GHz frequency band. Different path loss models and terrain types are considered. Coverage and throughput in a sector are determined for this business scenario

RECEIVE SIGNAL STRENGTH PREDICTION IN THE GSM BAND USING WAVELET DECOMPOSITION

In this work, GSM receive signal strength was monitored in an indoor environment. Samples of  GSM receive signal strength was measured on a Mobile Equipment (ME). One-dimensional multilevel wavelet decomposition technique was used to predict the fading phenomenon of the GSM receive signal strength measured. Wavelet prediction revealed that the GSM receive signal strength is attenuated due to the slow fading phenomenon, which fades about 3 times faster than the radio wavelength. The prediction is further validated using probability density functions in terms of Gaussian and Rayleigh distributions. It is observed that, significant part of the signal strength measured is dominated by good signal (- 101 dBm to – 74 dBm) with an average of – 88.8842 dBm and the signal strength followed more of Gaussian than Rayleigh distribution. This confirmed the wavelet prediction.  http://dx.doi.org/10.4314/njt.v36i1.2

A SYSTEMATIC EVALUATION OF LINK BUDGET FOR EFFECTIVE 900MHz GSM COMMUNICATION SERVICES

This paper describes the various basic parameters necessary to determine a high level link budget for radio communication operating at 900MHz spectrum band. It considers a typical Lagos terrain by using the Okumura and Hata prediction model in calculating the path loss between a transmitter and mobile receivers. In this paper, the rain attenuation calculation from the updated ITU model was incorporated into the link budget to improve GSM communication during rainfall. These parameters can be used to predict a reliable communication ranges for the design and implementation of future GSM communication systems. Keywords: 900MHz Spectrum Band, Prediction model, Link-budget, Path loss, Rain attenuation, Communication ranges, GSM Communication

Experimental statistical channel modelling for advanced wireless communication systems in indoor environments

Draadloze communicatiesystemen voor mobiele telefonie en draadloos internet zijn onmisbaar geworden in het dagelijkse leven. De grootste troef van draadloze communicatie over bedrade communicatie is de toegenomen mobiliteit. Draadloze communicatie heeft evenwel ook één groot nadeel, namelijk de onzekerheid over de kwaliteit van de link tussen zender en ontvanger. Waar bedrade communicatie een doorgedreven ontwerp van het kanaal tussen zender en ontvanger (d.i. de kabel) toelaat, is het ontwerp van het draadloze kanaal (d.i. de omgeving) bijna onmogelijk. Desondanks kunnen wel modellen van de propagatie van draadloze signalen opgesteld worden voor verschillende types omgevingen. Deze modellen laten toe om de betrouwbaarheid en de performantie van een draadloze link in te schatten. Modellering van draadloze propagatie voor indooromgevingen is het algemeen onderwerp van dit proefschrift. De propagatiemodellering in dit proefschrift betreft drie types indooromgevingen, nl. industriële en kantooromgevingen, en de omgeving binnen in een voertuig. De modellering bestaat uit statistische modellen gebaseerd op veldmetingen in deze omgevingen. Verschillende parameters van draadloze signalen worden onderzocht, zoals de variabiliteit van het signaalvermogen met de afstand en in de tijd, het signaalbereik, de dispersie in het tijdsdomein, de dispersie in het spatiaal domein en het vermogensverlies bij propagatie van buiten naar binnen een voertuig

ROLAX: LOCATION DETERMINATION TECHNIQUES IN 4G NETWORKS

In this dissertation, ROLAX location determination system in 4G networks is presented. ROLAX provides two primary solutions for the location determination in the 4G networks. First, it provides techniques to detect the error-prone wireless conditions in geometric approaches of Time of Arrival (ToA) and Time Difference of Arrival (TDoA). ROLAX provides techniques for a Mobile Station (MS) to determine the Dominant Line-of-Sight Path (DLP) condition given the measurements of the downlink signals from the Base Station (BS). Second, robust RF fingerprinting techniques for the 4G networks are designed. The causes for the signal measurement variation are identified, and the system is designed taking those into account, leading to a significant improvement in accuracy. ROLAX is organized in two phases: offline and online phases. During the offline phase, the radiomap is constructed by wardriving. In order to provide the portability of the techniques, standard radio measurements such as Received Signal Strength Indication (RSSI) and Carrier to Interference Noise Ratio(CINR) are used in constructing the radiomap. During the online phase, a MS performs the DLP condition test for each BS it can observe. If the number of the BSs under DLP is small, the MS attempts to determine its location by using the RF fingerprinting. In ROLAX, the DLP condition is determined from the RSSI, CINR, and RTD (Round Trip Delay) measurements. Features generated from the RSSI difference between two antennas of the MS were also used. The features, including the variance, the level crossing rate, the correlation between the RSSI and RTD, and Kullback-Leibler Divergence, were successfully used in detecting the DLP condition. We note that, compared to using a single feature, appropriately combined multiple features lead to a very accurate DLP condition detection. A number of pattern matching techniques are evaluated for the purpose of the DLP condition detection. Artificial neural networks, instance-based learning, and Rotation Forest are particularly used in the DLP detection. When the Rotation Forest is used, a detection accuracy of 94.8\% was achieved in the live 4G networks. It has been noted that features designed in the DLP detection can be useful in the RF fingerprinting. In ROLAX, in addition to the DLP detection features, mean of RSSI and mean of CINR are used to create unique RF fingerprints. ROLAX RF fingerprinting techniques include: (1) a number of gridding techniques, including overlapped gridding; (2) an automatic radiomap generation technique by the Delaunay triangulation-based interpolation; (3) the filtering of measurements based upon the power-capture relationship between BSs; and (4) algorithms dealing with the missing data. In this work, software was developed using the interfaces provided by Beceem/Broadcom chip-set based software. Signals were collected from both the home network (MAXWell 4G network) and the foreign network (Clear 4G network). By combining the techniques in ROLAX, a distance error in the order of 4 meters was achieved in the live 4G networks