On-board B-ISDN fast packet switching architectures. Phase 1: Study

The broadband integrate services digital network (B-ISDN) is an emerging telecommunications technology that will meet most of the telecommunications networking needs in the mid-1990's to early next century. The satellite-based system is well positioned for providing B-ISDN service with its inherent capabilities of point-to-multipoint and broadcast transmission, virtually unlimited connectivity between any two points within a beam coverage, short deployment time of communications facility, flexible and dynamic reallocation of space segment capacity, and distance insensitive cost. On-board processing satellites, particularly in a multiple spot beam environment, will provide enhanced connectivity, better performance, optimized access and transmission link design, and lower user service cost. The following are described: the user and network aspects of broadband services; the current development status in broadband services; various satellite network architectures including system design issues; and various fast packet switch architectures and their detail designs

Future benefits and applications of intelligent on-board processing to VSAT services

The trends and roles of VSAT services in the year 2010 time frame are examined based on an overall network and service model for that period. An estimate of the VSAT traffic is then made and the service and general network requirements are identified. In order to accommodate these traffic needs, four satellite VSAT architectures based on the use of fixed or scanning multibeam antennas in conjunction with IF switching or onboard regeneration and baseband processing are suggested. The performance of each of these architectures is assessed and the key enabling technologies are identified

Application of Asynchronous Transfer Mode (Atm) technology to Picture Archiving and Communication Systems (Pacs): A survey

Broadband Integrated Services Digital Network (R-ISDN) provides a range of narrowband and broad-band services for voice, video, and multimedia. Asynchronous Transfer Mode (ATM) has been selected by the standards bodies as the transfer mode for implementing B-ISDN; The ability to digitize images has lead to the prospect of reducing the physical space requirements, material costs, and manual labor of traditional film handling tasks in hospitals. The system which handles the acquisition, storage, and transmission of medical images is called a Picture Archiving and Communication System (PACS). The transmission system will directly impact the speed of image transfer. Today the most common transmission means used by acquisition and display station products is Ethernet. However, when considering network media, it is important to consider what the long term needs will be. Although ATM is a new standard, it is showing signs of becoming the next logical step to meet the needs of high speed networks; This thesis is a survey on ATM, and PACS. All the concepts involved in developing a PACS are presented in an orderly manner. It presents the recent developments in ATM, its applicability to PACS and the issues to be resolved for realising an ATM-based complete PACS. This work will be useful in providing the latest information, for any future research on ATM-based networks, and PACS

Quality of service over ATM networks

PhDAbstract not availabl

A high speed fault-tolerant multimedia network and connectionless gateway for ATM networks.

by Patrick Lam Sze Fan.Thesis (M.Phil.)--Chinese University of Hong Kong, 1997.Includes bibliographical references (leaves 163-[170]).Chapter 1 --- Introduction --- p.1Chapter 2 --- Fault-tolerant CUM LAUDE NET --- p.7Chapter 2.1 --- Overview of CUM LAUDE NET --- p.7Chapter 2.2 --- Network architecture of CUM LAUDE NET --- p.8Chapter 2.3 --- Design of Router-node --- p.10Chapter 2.3.1 --- Architecture of the Router-node --- p.10Chapter 2.3.2 --- Buffers Arrangement of the Router-node --- p.12Chapter 2.3.3 --- Buffer transmission policies --- p.13Chapter 2.4 --- Protocols of CUM LAUDE NET --- p.14Chapter 2.5 --- Frame Format of CUM LAUDE NET --- p.15Chapter 2.6 --- Fault-tolerant (FT) and Auto-healing (AH) algorithms --- p.16Chapter 2.6.1 --- Overview of the algorithms --- p.16Chapter 2.6.2 --- Network Failure Scenarios --- p.18Chapter 2.6.3 --- Design and Implementation of the Fault Tolerant Algorithm --- p.19Chapter 2.6.4 --- Design and Implementation of the Auto Healing Algorithm --- p.26Chapter 2.6.5 --- Network Management Signals and Restoration Times --- p.27Chapter 2.6.6 --- Comparison of fault-tolerance features of other networks with the CUM LAUDE NET --- p.31Chapter 2.7 --- Chapter Summary --- p.31Chapter 3 --- Overview of the Asynchronous Transfer Mode (ATM) --- p.33Chapter 3.1 --- Introduction --- p.33Chapter 3.2 --- ATM Network Interfaces --- p.34Chapter 3.3 --- ATM Virtual Connections --- p.35Chapter 3.4 --- ATM Cell Format --- p.36Chapter 3.5 --- ATM Address Formats --- p.36Chapter 3.6 --- ATM Protocol Reference Model --- p.38Chapter 3.6.1 --- The ATM Layer --- p.39Chapter 3.6.2 --- The ATM Adaptation Layer --- p.39Chapter 3.7 --- ATM Signalling --- p.44Chapter 3.7.1 --- ATM Signalling Messages and Call Setup Procedures --- p.45Chapter 3.8 --- Interim Local Management Interface (ILMI) --- p.47Chapter 4 --- Issues of Connectionless Gateway --- p.49Chapter 4.1 --- Introduction --- p.49Chapter 4.2 --- The Issues --- p.50Chapter 4.3 --- ATM Internetworking --- p.51Chapter 4.3.1 --- LAN Emulation --- p.52Chapter 4.3.2 --- IP over ATM --- p.53Chapter 4.3.3 --- Comparing IP over ATM and LAN Emulation --- p.59Chapter 4.4 --- Connection Management --- p.61Chapter 4.4.1 --- The Indirect Approach --- p.62Chapter 4.4.2 --- The Direct Approach --- p.63Chapter 4.4.3 --- Comparing the two approaches --- p.64Chapter 4.5 --- Protocol Conversion --- p.65Chapter 4.5.1 --- Selection of Protocol Converter --- p.68Chapter 4.6 --- Packet Forwarding Modes --- p.68Chapter 4.7 --- Bandwidth Assignment --- p.70Chapter 4.7.1 --- Bandwidth Reservation --- p.71Chapter 4.7.2 --- Fast Bandwidth Reservation --- p.72Chapter 4.7.3 --- Bandwidth Advertising --- p.72Chapter 4.7.4 --- Bandwidth Advertising with Cell Drop Detection --- p.73Chapter 4.7.5 --- Bandwidth Allocation on Source Demand --- p.73Chapter 4.7.6 --- The Common Problems --- p.74Chapter 5 --- Design and Implementation of the Connectionless Gateway --- p.77Chapter 5.1 --- Introduction --- p.77Chapter 5.1.1 --- Functions Definition of Connectionless Gateway --- p.79Chapter 5.2 --- Hardware Architecture of the Connectionless Gateway --- p.79Chapter 5.2.1 --- Imposed Limitations --- p.82Chapter 5.3 --- Software Architecture of the Connectionless Gateway --- p.83Chapter 5.3.1 --- TCP/IP Internals --- p.84Chapter 5.3.2 --- ATM on Linux --- p.85Chapter 5.4 --- Network Architecture --- p.88Chapter 5.4.1 --- IP Addresses Assignment --- p.90Chapter 5.5 --- Internal Structure of Connectionless Gateway --- p.90Chapter 5.5.1 --- Protocol Stacks of the Gateway --- p.90Chapter 5.5.2 --- Gateway Operation by Example --- p.93Chapter 5.5.3 --- Routing Table Maintenance --- p.97Chapter 5.6 --- Additional Features --- p.105Chapter 5.6.1 --- Priority Output Queues System --- p.105Chapter 5.6.2 --- Gateway Performance Monitor --- p.112Chapter 5.7 --- Setup an Operational ATM LAN --- p.117Chapter 5.7.1 --- SVC Connections --- p.117Chapter 5.7.2 --- PVC Connections --- p.119Chapter 5.8 --- Application of the Connectionless Gateway --- p.120Chapter 6 --- Performance Measurement of the Connectionless Gateway --- p.121Chapter 6.1 --- Introduction --- p.121Chapter 6.2 --- Experimental Setup --- p.121Chapter 6.3 --- Measurement Tools of the Experiments --- p.123Chapter 6.4 --- Descriptions of the Experiments --- p.124Chapter 6.4.1 --- Log Files --- p.125Chapter 6.5 --- UDP Control Rate Test --- p.126Chapter 6.5.1 --- Results and analysis of the UDP Control Rate Test --- p.127Chapter 6.6 --- UDP Maximum Rate Test --- p.138Chapter 6.6.1 --- Results and analysis of the UDP Maximum Rate Test --- p.138Chapter 6.7 --- TCP Maximum Rate Test --- p.140Chapter 6.7.1 --- Results and analysis of the TCP Maximum Rate Test --- p.140Chapter 6.8 --- Request/Response Test --- p.144Chapter 6.8.1 --- Results and analysis of the Request/Response Test --- p.144Chapter 6.9 --- Priority Queue System Verification Test --- p.149Chapter 6.9.1 --- Results and analysis of the Priority Queue System Verifi- cation Test --- p.150Chapter 6.10 --- Other Observations --- p.153Chapter 6.11 --- Solutions to Improve the Performance --- p.154Chapter 6.12 --- Future Development --- p.157Chapter 7 --- Conclusion --- p.158Bibliography --- p.163A List of Publications --- p.17

Satellite Networks: Architectures, Applications, and Technologies

Since global satellite networks are moving to the forefront in enhancing the national and global information infrastructures due to communication satellites' unique networking characteristics, a workshop was organized to assess the progress made to date and chart the future. This workshop provided the forum to assess the current state-of-the-art, identify key issues, and highlight the emerging trends in the next-generation architectures, data protocol development, communication interoperability, and applications. Presentations on overview, state-of-the-art in research, development, deployment and applications and future trends on satellite networks are assembled