Modeling of thermally induced skew variations in clock distribution network

Clock distribution network is sensitive to large thermal gradients on the die as the performance of both clock buffers and interconnects are affected by temperature. A robust clock network design relies on the accurate analysis of clock skew subject to temperature variations. In this work, we address the problem of thermally induced clock skew modeling in nanometer CMOS technologies. The complex thermal behavior of both buffers and interconnects are taken into account. In addition, our characterization of the temperature effect on buffers and interconnects provides valuable insight to designers about the potential impact of thermal variations on clock networks. The use of industrial standard data format in the interface allows our tool to be easily integrated into existing design flow

Physical Design Methodologies for Low Power and Reliable 3D ICs

As the semiconductor industry struggles to maintain its momentum down the path following the Moore's Law, three dimensional integrated circuit (3D IC) technology has emerged as a promising solution to achieve higher integration density, better performance, and lower power consumption. However, despite its significant improvement in electrical performance, 3D IC presents several serious physical design challenges. In this dissertation, we investigate physical design methodologies for 3D ICs with primary focus on two areas: low power 3D clock tree design, and reliability degradation modeling and management. Clock trees are essential parts for digital system which dissipate a large amount of power due to high capacitive loads. The majority of existing 3D clock tree designs focus on minimizing the total wire length, which produces sub-optimal results for power optimization. In this dissertation, we formulate a 3D clock tree design flow which directly optimizes for clock power. Besides, we also investigate the design methodology for clock gating a 3D clock tree, which uses shutdown gates to selectively turn off unnecessary clock activities. Different from the common assumption in 2D ICs that shutdown gates are cheap thus can be applied at every clock node, shutdown gates in 3D ICs introduce additional control TSVs, which compete with clock TSVs for placement resources. We explore the design methodologies to produce the optimal allocation and placement for clock and control TSVs so that the clock power is minimized. We show that the proposed synthesis flow saves significant clock power while accounting for available TSV placement area. Vertical integration also brings new reliability challenges including TSV's electromigration (EM) and several other reliability loss mechanisms caused by TSV-induced stress. These reliability loss models involve complex inter-dependencies between electrical and thermal conditions, which have not been investigated in the past. In this dissertation we set up an electrical/thermal/reliability co-simulation framework to capture the transient of reliability loss in 3D ICs. We further derive and validate an analytical reliability objective function that can be integrated into the 3D placement design flow. The reliability aware placement scheme enables co-design and co-optimization of both the electrical and reliability property, thus improves both the circuit's performance and its lifetime. Our electrical/reliability co-design scheme avoids unnecessary design cycles or application of ad-hoc fixes that lead to sub-optimal performance. Vertical integration also enables stacking DRAM on top of CPU, providing high bandwidth and short latency. However, non-uniform voltage fluctuation and local thermal hotspot in CPU layers are coupled into DRAM layers, causing a non-uniform bit-cell leakage (thereby bit flip) distribution. We propose a performance-power-resilience simulation framework to capture DRAM soft error in 3D multi-core CPU systems. In addition, a dynamic resilience management (DRM) scheme is investigated, which adaptively tunes CPU's operating points to adjust DRAM's voltage noise and thermal condition during runtime. The DRM uses dynamic frequency scaling to achieve a resilience borrow-in strategy, which effectively enhances DRAM's resilience without sacrificing performance. The proposed physical design methodologies should act as important building blocks for 3D ICs and push 3D ICs toward mainstream acceptance in the near future

HIGH PERFORMANCE CLOCK DISTRIBUTION FOR HIGH-SPEED VLSI SYSTEMS

Tohoku University堀口 進課

Modeling and Design Techniques for 3-D ICs under Process, Voltage, and Temperature Variations

Three-dimensional (3-D) integration is a promising solution to further enhance the density and performance of modern integrated circuits (ICs). In 3-D ICs, multiple dies (tiers or planes) are vertically stacked. These dies can be designed and fabricated separately. In addition, these dies can be fabricated in different technologies. The effect of different sources of variations on 3-D circuits, consequently, differ from 2-D ICs. As technology scales, these variations significantly affect the performance of circuits. Therefore, it is increasingly important to accurately and efficiently model different sources of variations in 3-D ICs. The process, voltage, and temperature variations in 3-D ICs are investigated in this dissertation. Related modeling and design techniques are proposed to design a robust 3-D IC. Process variations in 3-D ICs are first analyzed. The effect of process variations on synchronization and 3-D clock distribution networks, is carefully studied. A novel statistical model is proposed to describe the timing variation in 3-D clock distribution networks caused by process variations. Based on this model, different topologies of 3-D clock distribution networks are compared in terms of skew variation. A set of guidelines is proposed to design 3-D clock distribution networks with low clock uncertainty. Voltage variations are described by power supply noise. Power supply noise in 3-D ICs is investigated considering different characteristics of potential 3-D power grids in this thesis. A new algorithm is developed to fast analyze the steady-state IR-drop in 3-D power grids. The first droop of power supply noise, also called resonant supply noise, is usually the deepest voltage drop in power distribution networks. The effect of resonant supply noise on 3-D clock distribution networks is investigated. The combined effect of process variations and power supply noise is modeled by skitter consisting of both skew and jitter. A novel statistical model of skitter is proposed. Based on this proposed model and simulation results, a set of guidelines has been proposed to mitigate the negative effect of process and voltage variations on 3-D clock distribution networks. Thermal issues in 3-D ICs are considered by carefully modeling thermal through silicon vias (TTSVs) in this dissertation. TTSVs are vertical vias which do not carry signals, dedicated to facilitate the propagation of heat to reduce the temperature of 3-D ICs. Two analytic models are proposed to describe the heat transfer in 3-D circuits related to TTSVs herein, providing proper closed-form expressions for the thermal resistance of the TTSVs. The effect of different physical and geometric parameters of TTSVs on the temperature of 3-D ICs is analyzed. The proposed models can be used to fast and accurately estimate the temperature to avoid the overuse of TTSVs occupying a large portion of area. A set of models and design techniques is proposed in this dissertation to describe and mitigate the deleterious effects of process, voltage, and temperature variations in 3-D ICs. Due to the continuous shrink in the feature size of transistors, the large number of devices within one circuit, and the high operating frequency, the effect of these variations on the performance of 3-D ICs becomes increasingly significant. Accurately and efficiently estimating and controlling these variations are, consequently, critical tasks for the design of 3-D ICs

Signaling in 3-D integrated circuits, benefits and challenges

Three-dimensional (3-D) or vertical integration is a design and packaging paradigm that can mitigate many of the increasing challenges related to the design of modern integrated systems. 3-D circuits have recently been at the spotlight, since these circuits provide a potent approach to enhance the performance and integrate diverse functions within amulti-plane stack. Clock networks consume a great portion of the power dissipated in a circuit. Therefore, designing a low-power clock network in synchronous circuits is an important task. This requirement is stricter for 3-D circuits due to the increased power densities. Synchronization issues can be more challenging for 3-D circuits since a clock path can spread across several planes with different physical and electrical characteristics. Consequently, designing low power clock networks for 3-D circuits is an important issue. Resonant clock networks are considered efficient low-power alternatives to conventional clock distribution schemes. These networks utilize additional inductive circuits to reduce power while delivering a full swing clock signal to the sink nodes. In this research, a design method to apply resonant clocking to synthesized clock trees is proposed. Manufacturing processes for 3-D circuits include some additional steps as compared to standard CMOS processes which makes 3-D circuits more susceptible to manufacturing defects and lowers the overall yield of the bonded 3-D stack. Testing is another complicated task for 3-D ICs, where pre-bond test is a prerequisite. Pre-bond testability, in turn, presents new challenges to 3-D clock network design primarily due to the incomplete clock distribution networks prior to the bonding of the planes. A design methodology of resonant 3-D clock networks that support wireless pre-bond testing is introduced. To efficiently address this issue, inductive links are exploited to wirelessly transmit the clock signal to the disjoint resonant clock networks. The inductors comprising the LC tanks are used as the receiver circuit for the links, essentially eliminating the need for additional circuits and/or interconnect resources during pre-bond test. Recent FPGAs are quite complex circuits which provide reconfigurablity at the cost of lower performance and higher power consumption as compared to ASIC circuits. Exploiting a large number of programmable switches, routing structures are mainly responsible for performance degradation in FPAGs. Employing 3-D technology can providemore efficient switches which drastically improve the performance and reduce the power consumption of the FPGA. RRAM switches are one of the most promising candidates to improve the FPGA routing architecture thanks to their low on-resistance and non-volatility. Along with the configurable switches, buffers are the other important element of the FPGAs routing structure. Different characteristics of RRAM switches change the properties of signal paths in RRAM-based FPGAs. The on resistance of RRAMswitches is considerably lower than CMOS pass gate switches which results in lower RC delay for RRAM-based routing paths. This different nature in critical path and signal delay in turn affect the need for intermediate buffers. Thus the buffer allocation should be reconsidered. In the last part of this research, the effect of intermediate buffers on signal propagation delay is studied and a modified buffer allocation scheme for RRAM-based FPGA routing path is proposed

Addressing Manufacturing Challenges in NoC-based ULSI Designs

Hernández Luz, C. (2012). Addressing Manufacturing Challenges in NoC-based ULSI Designs [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/1669

Exploration and Design of Power-Efficient Networked Many-Core Systems

Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level. From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by today’s and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques. From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented. Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.Siirretty Doriast

Cross-Layer Pathfinding for Off-Chip Interconnects

Off-chip interconnects for integrated circuits (ICs) today induce a diverse design space, spanning many different applications that require transmission of data at various bandwidths, latencies and link lengths. Off-chip interconnect design solutions are also variously sensitive to system performance, power and cost metrics, while also having a strong impact on these metrics. The costs associated with off-chip interconnects include die area, package (PKG) and printed circuit board (PCB) area, technology and bill of materials (BOM). Choices made regarding off-chip interconnects are fundamental to product definition, architecture, design implementation and technology enablement. Given their cross-layer impact, it is imperative that a cross-layer approach be employed to architect and analyze off-chip interconnects up front, so that a top-down design flow can comprehend the cross-layer impacts and correctly assess the system performance, power and cost tradeoffs for off-chip interconnects. Chip architects are not exposed to all the tradeoffs at the physical and circuit implementation or technology layers, and often lack the tools to accurately assess off-chip interconnects. Furthermore, the collaterals needed for a detailed analysis are often lacking when the chip is architected; these include circuit design and layout, PKG and PCB layout, and physical floorplan and implementation. To address the need for a framework that enables architects to assess the system-level impact of off-chip interconnects, this thesis presents power-area-timing (PAT) models for off-chip interconnects, optimization and planning tools with the appropriate abstraction using these PAT models, and die/PKG/PCB co-design methods that help expose the off-chip interconnect cross-layer metrics to the die/PKG/PCB design flows. Together, these models, tools and methods enable cross-layer optimization that allows for a top-down definition and exploration of the design space and helps converge on the correct off-chip interconnect implementation and technology choice. The tools presented cover off-chip memory interfaces for mobile and server products, silicon photonic interfaces, 2.5D silicon interposers and 3D through-silicon vias (TSVs). The goal of the cross-layer framework is to assess the key metrics of the interconnect (such as timing, latency, active/idle/sleep power, and area/cost) at an appropriate level of abstraction by being able to do this across layers of the design flow. In additional to signal interconnect, this thesis also explores the need for such cross-layer pathfinding for power distribution networks (PDN), where the system-on-chip (SoC) floorplan and pinmap must be optimized before the collateral layouts for PDN analysis are ready. Altogether, the developed cross-layer pathfinding methodology for off-chip interconnects enables more rapid and thorough exploration of a vast design space of off-chip parallel and serial links, inter-die and inter-chiplet links and silicon photonics. Such exploration will pave the way for off-chip interconnect technology enablement that is optimized for system needs. The basis of the framework can be extended to cover other interconnect technology as well, since it fundamentally relates to system-level metrics that are common to all off-chip interconnects