On-Chip Transparent Wire Pipelining (invited paper)

Wire pipelining has been proposed as a viable mean to break the discrepancy between decreasing gate delays and increasing wire delays in deep-submicron technologies. Far from being a straightforwardly applicable technique, this methodology requires a number of design modifications in order to insert it seamlessly in the current design flow. In this paper we briefly survey the methods presented by other researchers in the field and then we thoroughly analyze the solutions we recently proposed, ranging from system-level wire pipelining to physical design aspects

Through-silicon-via-aware prediction and physical design for multi-granularity 3D integrated circuits

The main objective of this research is to predict the wirelength, area, delay, and power of multi-granularity three-dimensional integrated circuits (3D ICs), to develop physical design methodologies and algorithms for the design of multi-granularity 3D ICs, and to investigate the impact of through-silicon vias (TSVs) on the quality of 3D ICs. This dissertation supports these objectives by addressing six research topics. The first pertains to analytical models that predict the interconnects of multi-granularity 3D ICs, and the second focuses on the development of analytical models of the capacitive coupling of TSVs. The third and the fourth topics present design methodologies and algorithms for the design of gate- and block-level 3D ICs, and the fifth topic pertains to the impact of TSVs on the quality of 3D ICs. The final topic addresses topography variation in 3D ICs. The first section of this dissertation presents TSV-aware interconnect prediction models for multi-granularity 3D ICs. As previous interconnect prediction models for 3D ICs did not take TSV area into account, they were not capable of predicting many important characteristics of 3D ICs related to TSVs. This section will present several previous interconnect prediction models that have been improved so that the area occupied by TSVs is taken into account. The new models show numerous important predictions such as the existence of the number of TSVs minimizing wirelength. The second section presents fast estimation of capacitive coupling of TSVs and wires. Since TSV-to-TSV and TSV-to-wire coupling capacitance is dependent on their relative locations, fast estimation of the coupling capacitance of a TSV is essential for the timing optimization of 3D ICs. Simulation results show that the analytical models presented in this section are sufficiently accurate for use at various design steps that require the computation of TSV capacitance. The third and fourth sections present design methodologies and algorithms for gate- and block-level 3D ICs. One of the biggest differences in the design of 2D and 3D ICs is that the latter requires TSV insertion. Since no widely-accepted design methodology designates when, where, and how TSVs are inserted, this work develops and presents several design methodologies for gate- and block-level 3D ICs and physical design algorithms supporting them. Simulation results based on GDSII-level layouts validate the design methodologies and present evidence of their effectiveness. The fifth section explores the impact of TSVs on the quality of 3D ICs. As TSVs become smaller, devices are shrinking, too. Since the relative size of TSVs and devices is more critical to the quality of 3D ICs than the absolute size of TSVs and devices, TSVs and devices should be taken into account in the study of the impact of TSVs on the quality of 3D ICs. In this section, current and future TSVs and devices are combined to produce 3D IC layouts and the impact of TSVs on the quality of 3D ICs is investigated. The final section investigates topography variation in 3D ICs. Since landing pads fabricated in the bottommost metal layer are attached to TSVs, they are larger than TSVs, so they could result in serious topography variation. Therefore, topography variation, especially in the bottommost metal layer, is investigated and two layout optimization techniques are applied to a global placement algorithm that minimizes the topography variation of the bottommost metal layer of 3D ICs.PhDCommittee Chair: Lim, Sung Kyu; Committee Member: Bakir, Muhannad; Committee Member: Kim, Hyesoon; Committee Member: Lee, Hsien-Hsin Sean; Committee Member: Mukhopadhyay, Saiba

Circuit design and analysis for on-FPGA communication systems

On-chip communication system has emerged as a prominently important subject in Very-Large- Scale-Integration (VLSI) design, as the trend of technology scaling favours logics more than interconnects. Interconnects often dictates the system performance, and, therefore, research for new methodologies and system architectures that deliver high-performance communication services across the chip is mandatory. The interconnect challenge is exacerbated in Field-Programmable Gate Array (FPGA), as a type of ASIC where the hardware can be programmed post-fabrication. Communication across an FPGA will be deteriorating as a result of interconnect scaling. The programmable fabrics, switches and the specific routing architecture also introduce additional latency and bandwidth degradation further hindering intra-chip communication performance. Past research efforts mainly focused on optimizing logic elements and functional units in FPGAs. Communication with programmable interconnect received little attention and is inadequately understood. This thesis is among the first to research on-chip communication systems that are built on top of programmable fabrics and proposes methodologies to maximize the interconnect throughput performance. There are three major contributions in this thesis: (i) an analysis of on-chip interconnect fringing, which degrades the bandwidth of communication channels due to routing congestions in reconfigurable architectures; (ii) a new analogue wave signalling scheme that significantly improves the interconnect throughput by exploiting the fundamental electrical characteristics of the reconfigurable interconnect structures. This new scheme can potentially mitigate the interconnect scaling challenges. (iii) a novel Dynamic Programming (DP)-network to provide adaptive routing in network-on-chip (NoC) systems. The DP-network architecture performs runtime optimization for route planning and dynamic routing which, effectively utilizes the in-silicon bandwidth. This thesis explores a new horizon in reconfigurable system design, in which new methodologies and concepts are proposed to enhance the on-FPGA communication throughput performance that is of vital importance in new technology processes

Extending systems-on-chip to the third dimension : performance, cost and technological tradeoffs.

Because of the today's market demand for high-performance, high-density portable hand-held applications, electronic system design technology has shifted the focus from 2-D planar SoC single-chip solutions to different alternative options as tiled silicon and single-level embedded modules as well as 3-D integration. Among the various choices, finding an optimal solution for system implementation dealt usually with cost, performance and other technological trade-off analysis at the system conceptual level. It has been identified that the decisions made within the first 20% of the total design cycle time will ultimately result up to 80% of the final product cost. In this paper, we discuss appropriate and realistic metric for performance and cost trade-off analysis both at system conceptual level (up-front in the design phase) and at implementation phase for verification in the three-dimensional integration. In order to validate the methodology, two ubiquitous electronic systems are analyzed under various implementation schemes and discuss the pros and cons of each of them

Telerobot operator control station requirements

The operator control station of a telerobot system has unique functional and human factors requirements. It has to satisfy the needs of a truly interactive and user-friendly complex system, a telerobot system being a hybrid between a teleoperated and an autonomous system. These functional, hardware and software requirements are discussed, with explicit reference to the design objectives and constraints of the JPL/NASA Telerobot Demonstrator System

Cross-Layer Pathfinding for Off-Chip Interconnects

Off-chip interconnects for integrated circuits (ICs) today induce a diverse design space, spanning many different applications that require transmission of data at various bandwidths, latencies and link lengths. Off-chip interconnect design solutions are also variously sensitive to system performance, power and cost metrics, while also having a strong impact on these metrics. The costs associated with off-chip interconnects include die area, package (PKG) and printed circuit board (PCB) area, technology and bill of materials (BOM). Choices made regarding off-chip interconnects are fundamental to product definition, architecture, design implementation and technology enablement. Given their cross-layer impact, it is imperative that a cross-layer approach be employed to architect and analyze off-chip interconnects up front, so that a top-down design flow can comprehend the cross-layer impacts and correctly assess the system performance, power and cost tradeoffs for off-chip interconnects. Chip architects are not exposed to all the tradeoffs at the physical and circuit implementation or technology layers, and often lack the tools to accurately assess off-chip interconnects. Furthermore, the collaterals needed for a detailed analysis are often lacking when the chip is architected; these include circuit design and layout, PKG and PCB layout, and physical floorplan and implementation. To address the need for a framework that enables architects to assess the system-level impact of off-chip interconnects, this thesis presents power-area-timing (PAT) models for off-chip interconnects, optimization and planning tools with the appropriate abstraction using these PAT models, and die/PKG/PCB co-design methods that help expose the off-chip interconnect cross-layer metrics to the die/PKG/PCB design flows. Together, these models, tools and methods enable cross-layer optimization that allows for a top-down definition and exploration of the design space and helps converge on the correct off-chip interconnect implementation and technology choice. The tools presented cover off-chip memory interfaces for mobile and server products, silicon photonic interfaces, 2.5D silicon interposers and 3D through-silicon vias (TSVs). The goal of the cross-layer framework is to assess the key metrics of the interconnect (such as timing, latency, active/idle/sleep power, and area/cost) at an appropriate level of abstraction by being able to do this across layers of the design flow. In additional to signal interconnect, this thesis also explores the need for such cross-layer pathfinding for power distribution networks (PDN), where the system-on-chip (SoC) floorplan and pinmap must be optimized before the collateral layouts for PDN analysis are ready. Altogether, the developed cross-layer pathfinding methodology for off-chip interconnects enables more rapid and thorough exploration of a vast design space of off-chip parallel and serial links, inter-die and inter-chiplet links and silicon photonics. Such exploration will pave the way for off-chip interconnect technology enablement that is optimized for system needs. The basis of the framework can be extended to cover other interconnect technology as well, since it fundamentally relates to system-level metrics that are common to all off-chip interconnects

Design Methodologies and Architecture Solutions for High-Performance Interconnects

ABSTRACT In Deep Sub-Micron (DSM) technologies, interconnects play a crucial role in the correct functionality and largely impact the performance of complex System-on-Chip (SoC) designs. For technologies of 0.25µm and below, wiring capacitance dominates gate capacitance, thus rapidly increasing the interconnect-induced delay. Moreover, the coupling capacitance becomes a significant portion of the on-chip total wiring capacitance, and coupling between adjacent wires cannot be considered as a second-order effect any longer. As a consequence, the traditional top-down design methodology is ineffective, since the actual wiring delays can be computed only after layout parasitic extraction, when the physical design is completed. Fixing all the timing violations often requires several time-consuming iterations of logical and physical design, and it is essentially a trial-and-error approach. Increasingly tighter time-to-market requirements dictate that interconnect parasitics must be taken into account during all phases of the design flow, at different level of abstractions. However, given the aggressive technology scaling trends and the growing design complexity, this approach will only temporarily ameliorate the interconnect problem. We believe that in order to achieve gigascale designs in the nanometer regime, a novel design paradigm, based on new forms of regularity and newly created IP (Intellectual Property) blocks must be developed, to provide a direct path from system-level architectural exploration to physical implementation

QCDOC: A 10-teraflops scale computer for lattice QCD

The architecture of a new class of computers, optimized for lattice QCD calculations, is described. An individual node is based on a single integrated circuit containing a PowerPC 32-bit integer processor with a 1 Gflops 64-bit IEEE floating point unit, 4 Mbyte of memory, 8 Gbit/sec nearest-neighbor communications and additional control and diagnostic circuitry. The machine's name, QCDOC, derives from ``QCD On a Chip''.Comment: Lattice 2000 (machines) 8 pages, 4 figure