Study of the correlation between bicuspid aortic valve and the development of aortic dissection

La disección aórtica (AD) es la condición letal más comúnmente diagnosticada de la arteria aorta y consiste en el redireccionamiento del flujo sanguíneo desde el lumen de la aorta hasta la media de la pared de la aorta a través de una pequeña fisura en la intima. Las causas específicas de la formación de esta fisura, y de la subsecuente dilatación de la pared, todavía no han sido completamente determinadas aunque diversos estudios muestran que puede ser debida o bien a cambios químicos o bien a efectos mecánicos en la pared de la aorta. Este trabajo se centra en el estudio de posibles efectos mecánicos, inducidos por cambios en la hemodinámica de la arteria, que puedan haber conducido al debilitamiento de la pared de la aorta. Válvula aórtica bicúspide (BAV) es la enfermedad congénita del corazón más común y se ha demostrado su importante contribución en el desarrollo de numerosas condiciones cardiovasculares. Esta enfermedad modifica el orificio de salida del corazón, y por tanto el perfil hemodinámico de eyección, del flujo de sangre, lo que podría tener consecuencias en el comportamiento mecánico de la pared de la aorta. Este estudio tiene como objetivo determinar que existe una correlación entre los cambios en la hemodinámica producidos por la presencia de BAV y la formación de AD usando técnicas de análisis de dinámica de fluidos computacional (CFD). Para determinar dicha relación, análisis CFD se han realizado en tres geometrías diferentes: un caso de válvula aórtica tricúspide (TAV) y dos casos distintos de BAV. Todas las geometrías son idealizadas y contemplan la raíz de la aorta, la aorta ascendente y el comienzo del cayado aórtico. Los resultados de los análisis muestran un incremento en la velocidad de eyección de la sangre para ambos casos de BAV debido a la reducción en el área efectiva del orificio. Además, el estudio muestra un incremento en las fuerzas de rozamiento de la pared y en la presión de la pared externa de la aorta. Estos resultados nos llevan a la conclusión de que BAV podría causar hipertensión en la pared externa de la aorta, la cual es una causa mecánica conocida del debilitamiento de vasos sanguíneos

Influence of MRI-based boundary conditions on type B aortic dissection simulations in false lumen with or without abdominal aorta involvement

Most computational hemodynamic studies of aortic dissections rely on idealized or general boundary conditions. However, numerical simulations that ignore the characteristics of the abdominal branch arteries may not be conducive to accurately observing the hemodynamic changes below the branch arteries. In the present study, two men (M-I and M-II) with type B aortic dissection (TBAD) underwent arterial-phase computed tomography angiography and four-dimensional flow magnetic resonance imaging (MRI) before and after thoracic endovascular aortic repair (TEVAR). The finite element method was used to simulate the computational fluid dynamic parameters of TBAD [false lumen (FL) with or without visceral artery involvement] under MRI-specific and three idealized boundary conditions in one cardiac cycle. Compared to the results of zero pressure and outflow boundary conditions, the simulations with MRI boundary conditions were closer to the initial MRI data. The pressure difference between TL and FL after TEVAR under the other three boundary conditions was lower than that of the MRI-specific results. The results of the outflow boundary conditions could not characterize the effect of the increased wall pressure near the left renal artery caused by the impact of Tear-1, which raised concerns about the distal organ and limb perfused by FL. After TEVAR, the flow velocity and wall pressure in the FL and the distribution areas of high time average wall shear stress and oscillating shear index were reduced. The difference between the calculation results for different boundary conditions was lower in M-II, wherein FL did not involve the abdominal aorta branches than in M-I. The boundary conditions of the abdominal branch arteries from MRI data might be valuable in elucidating the hemodynamic changes of the descending aorta in TBAD patients before and after treatment, especially those with FL involving the branch arteries

Hemodynamic Effects of Entry and Exit Tear Size in Aortic Dissection Evaluated with In Vitro Magnetic Resonance Imaging and Fluid-Structure Interaction Simulation

Understanding the complex interplay between morphologic and hemodynamic features in aortic dissection is critical for risk stratification and for the development of individualized therapy. This work evaluates the effects of entry and exit tear size on the hemodynamics in type B aortic dissection by comparing fluid-structure interaction (FSI) simulations with in vitro 4D-flow magnetic resonance imaging (MRI). A baseline patient-specific 3D-printed model and two variants with modified tear size (smaller entry tear, smaller exit tear) were embedded into a flow- and pressure-controlled setup to perform MRI as well as 12-point catheter-based pressure measurements. The same models defined the wall and fluid domains for FSI simulations, for which boundary conditions were matched with measured data. Results showed exceptionally well matched complex flow patterns between 4D-flow MRI and FSI simulations. Compared to the baseline model, false lumen flow volume decreased with either a smaller entry tear (-17.8 and -18.5 %, for FSI simulation and 4D-flow MRI, respectively) or smaller exit tear (-16.0 and -17.3 %). True to false lumen pressure difference (initially 11.0 and 7.9 mmHg, for FSI simulation and catheter-based pressure measurements, respectively) increased with a smaller entry tear (28.9 and 14.6 mmHg), and became negative with a smaller exit tear (-20.6 and -13.2 mmHg). This work establishes quantitative and qualitative effects of entry or exit tear size on hemodynamics in aortic dissection, with particularly notable impact observed on FL pressurization. FSI simulations demonstrate acceptable qualitative and quantitative agreement with flow imaging, supporting its deployment in clinical studies.Comment: Judith Zimmermann and Kathrin B\"aumler contributed equall

Patient-specific computational fluid dynamics-assessment of aortic hemodynamics in a spectrum of aortic valve pathologies.

OBJECTIVES: The complexity of aortic disease is not fully exposed by aortic dimensions alone, and morbidity or mortality can occur before intervention thresholds are met. Patient-specific computational fluid dynamics (CFD) were used to assess the effect of different aortic valve morphologies on velocity profiles, flow patterns, helicity, wall shear stress (WSS), and oscillatory shear index (OSI) in the thoracic aorta. METHODS: A total of 45 subjects were divided into 5 groups: volunteers, aortic regurgitation-tricuspid aortic valve (AR-TAV), aortic stenosis-tricuspid aortic valve (AS-TAV), aortic stenosis-bicuspid aortic valve right-left cusp fusion (BAV[RL]), and aortic stenosis-right-non cusp fusion (AS-BAV[RN]). Subjects underwent magnetic resonance angiography, with phase-contrast magnetic resonance imaging at the sino-tubular junction to define patient-specific inflow velocity profiles. Hemodynamic recordings were used alongside magnetic resonance imaging angiographic data to run patient-specific CFD. RESULTS: The BAV groups had larger mid-ascending aorta diameters (P < .05). Ascending aorta flow was more eccentric in BAV (flow asymmetry = 78.9% ± 6.5% for AS-BAV(RN), compared with 4.7% ± 2.1% for volunteers, P < .05). Helicity was greater in AS-BAV(RL) (P < .05). Mean WSS was elevated in AS groups, greatest in AS-BAV(RN) (37.1 ± 4.0 dyn/cm2, compared with 9.8 ± 5.4 for volunteers, P < .05). The greater curvature of the ascending aorta experienced highest WSS and lowest OSI in AS patients, most significant in AS-BAV(RN) (P < .05). CONCLUSIONS: BAV displays eccentric flow with high helicity. The presence of AS, particularly in BAV-RN, led to greater WSS and lower OSI in the greater curvature of the ascending aorta. Patient-specific CFD provides noninvasive functional assessment of the thoracic aorta, and may enable development of a personalized approach to diagnosis and management of aortic disease beyond traditional guidelines

Analysis of Blood Flow in Patient-specific Models of Type B Aortic Dissection

Aortic dissection is the most common acute catastrophic event affecting the aorta. The majority of patients presenting with an uncomplicated type B dissection are treated medically, but 25% of these patients develop subsequent dilatation and aortic aneurysm formation. The reasons behind the long‐term outcomes of type B aortic dissection are poorly understood. As haemodynamic factors have been involved in the development and progression of a variety of cardiovascular diseases, the flow phenomena and environment in patient‐specific models of type B aortic dissection have been studied in this thesis by applying computational fluid dynamics (CFD) to in vivo data. The present study aims to gain more detailed knowledge of the links between morphology, flow characteristics and clinical outcomes in type B dissection patients. The thesis includes two parts of patient‐specific study: a multiple case cross‐sectional study and a single case longitudinal study. The multiple cases study involved a group of ten patients with classic type B aortic dissection with a focus on examining the flow characteristics as well as the role of morphological factors in determining the flow patterns and haemodynamic parameters. The single case study was based on a series of follow‐up scans of a patient who has a stable dissection, with an aim to identify the specified haemodynamic factors that are associated with the progression of aortic dissection. Both studies were carried out based on computed tomography images acquired from the patients. 4D Phase‐contrast magnetic resonance imaging was performed on a typical type B aortic dissection patient to provide detailed flow data for validation purpose. This was achieved by qualitative and quantitative comparisons of velocity‐encoded images with simulation results of the CFD model. The analysis of simulation results, including velocity, wall shear stress and turbulence intensity profiles, demonstrates certain correlations between the morphological features and haemodynamic factors, and also their effects on long‐term outcomes of type B aortic dissections. The simulation results were in good agreement with in vivo MR flow data in the patient‐specific validation case, giving credence to the application of the computational model to the study of flow conditions in aortic dissection. This study made an important contribution by identifying the role of certain morphological and haemodynamic factors in the development of type B aortic dissection, which may help provide a better guideline to assist surgeons in choosing optimal treatment protocol for individual patient

Study of a medical device to treat aortic dissection with Finite Element Analysis

Treballs Finals de Grau d'Enginyeria Biomèdica. Facultat de Medicina i Ciències de la Salut. Universitat de Barcelona. Curs: 2022-2023. Tutor/Director: Carmona Flores, Manuel, Soudah Prieto, EduardoThe aortic dissection is a cardiovascular disease that results from the rupture of the inner layer of the aorta. Type B aortic dissections commonly become a chronic disease with a high long-term morbidity and mortality rates. Current treatments include open surgery repair and thoracic endovascular aortic repair (TEVAR). However, new non-invasive treatments are being developed that favour the own regeneration of the tissue, avoiding the permanent presence of a foreign device in the body. This project focuses on the understanding of a new treatment with a medical device, an aortic patch, by in silico testing. The goal is to determine the performance of the patch in a simulated aortic dissection and then compare it with the current treatment with the stent graft (TEVAR), to determine if it would avoid the hypertension that can be caused by the stent. To do the first part, it was created a model of the aortic dissection, but due to complications with the simulation, this part of the project couldn’t be finished, and the performance of the patch in the aortic dissection couldn’t be determined. To do the second part three models were created: healthy aorta, aortic dissection with stent graft and aortic dissection with patch. A transient simulation was run for the three models and the pressure waveform was analyzed. The results show that the pressure in the stent graft model is higher, and the patch has a similar response to the healthy aorta. However, all the models presented hypertension (including the healthy aorta) and the differences between the models are too small to be concluding, so it cannot be assured that the patch is a better option than the stent graft to avoid causing hypertension in the aortic dissection treatment

A Rapid and Computationally Inexpensive Method to Virtually Implant Current and Next-Generation Stents into Subject-Specific Computational Fluid Dynamics Models

Computational modeling is often used to quantify hemodynamic alterations induced by stenting, but frequently uses simplified device or vascular representations. Based on a series of Boolean operations, we developed an efficient and robust method for assessing the influence of current and next-generation stents on local hemodynamics and vascular biomechanics quantified by computational fluid dynamics. Stent designs were parameterized to allow easy control over design features including the number, width and circumferential or longitudinal spacing of struts, as well as the implantation diameter and overall length. The approach allowed stents to be automatically regenerated for rapid analysis of the contribution of design features to resulting hemodynamic alterations. The applicability of the method was demonstrated with patient-specific models of a stented coronary artery bifurcation and basilar trunk aneurysm constructed from medical imaging data. In the coronary bifurcation, we analyzed the hemodynamic difference between closed-cell and open-cell stent geometries. We investigated the impact of decreased strut size in stents with a constant porosity for increasing flow stasis within the stented basilar aneurysm model. These examples demonstrate the current method can be used to investigate differences in stent performance in complex vascular beds for a variety of stenting procedures and clinical scenarios

Aortic dissection simulation models for clinical support: fluid-structure interaction vs. rigid wall models

BACKGROUND: The management and prognosis of aortic dissection (AD) is often challenging and the use of personalised computational models is being explored as a tool to improve clinical outcome. Including vessel wall motion in such simulations can provide more realistic and potentially accurate results, but requires significant additional computational resources, as well as expertise. With clinical translation as the final aim, trade-offs between complexity, speed and accuracy are inevitable. The present study explores whether modelling wall motion is worth the additional expense in the case of AD, by carrying out fluid-structure interaction (FSI) simulations based on a sample patient case. METHODS: Patient-specific anatomical details were extracted from computed tomography images to provide the fluid domain, from which the vessel wall was extrapolated. Two-way fluid-structure interaction simulations were performed, with coupled Windkessel boundary conditions and hyperelastic wall properties. The blood was modelled using the Carreau-Yasuda viscosity model and turbulence was accounted for via a shear stress transport model. A simulation without wall motion (rigid wall) was carried out for comparison purposes. RESULTS: The displacement of the vessel wall was comparable to reports from imaging studies in terms of intimal flap motion and contraction of the true lumen. Analysis of the haemodynamics around the proximal and distal false lumen in the FSI model showed complex flow structures caused by the expansion and contraction of the vessel wall. These flow patterns led to significantly different predictions of wall shear stress, particularly its oscillatory component, which were not captured by the rigid wall model. CONCLUSIONS: Through comparison with imaging data, the results of the present study indicate that the fluid-structure interaction methodology employed herein is appropriate for simulations of aortic dissection. Regions of high wall shear stress were not significantly altered by the wall motion, however, certain collocated regions of low and oscillatory wall shear stress which may be critical for disease progression were only identified in the FSI simulation. We conclude that, if patient-tailored simulations of aortic dissection are to be used as an interventional planning tool, then the additional complexity, expertise and computational expense required to model wall motion is indeed justified

Irregular anatomical features can alter hemodynamics in Takayasu arteritis

Objective Takayasu arteritis (TA) is a difficult disease to deal with because there are neither reliable clinical signs, laboratory biomarkers, nor a single noninvasive imaging technique that can be used for early diagnosis and disease activity monitoring. Knowledge of aortic hemodynamics in TA is lacking. This study aimed to fill this gap by assessing hemodynamics in patients with TA using image-based computational fluid dynamics (CFD) simulations. Methods Eleven patients with TA were included in the present study. Patient-specific geometries were reconstructed from either clinical aortic computed tomography angiography or magnetic resonance angiography studies and coupled with physiological boundary conditions for CFD simulations. Key anatomical and hemodynamic parameters were compared with a control group consisting of 18 age- and sex-matched adults without TA who had healthy aortas. Results Compared with controls, patients with TA had significantly higher aortic velocities (0.9 m/s [0.7, 1.1 m/s] vs 0.6 m/s [0.5, 0.7 m/s]; P = .002), maximum time-averaged wall shear stress (14.2 Pa [9.8, 20.9 Pa] vs 8.0 Pa [6.2, 10.3 Pa]; P = .004), and maximum pressure drops between the ascending and descending aorta (36.9 mm Hg [29.0, 49.3 mm Hg] vs 28.5 mm Hg [25.8, 31.5 mm Hg]; P = .004). These significant hemodynamic alterations in patients with TA might result from abnormal anatomical features including smaller arch diameter (20.0 mm [13.8, 23.3 mm] vs 25.2 mm [23.3, 26.8 mm]; P = .003), supra-aortic branch diameters (21.9 mm [18.5, 24.6 mm] vs 25.7 mm [24.3, 28.3 mm]; P = .003) and descending aorta diameter (14.7 mm [12.2, 16.8 mm] vs 22.5 mm [19.8, 24.0 mm]; P < .001). Conclusions CFD analysis reveals hemodynamic changes in the aorta of patients with TA. The applicability of CFD technique coupled with standard imaging assessments in predicting disease progression of such patients will be explored in future studies. Future large cohort study with outcome correlation is also warranted. Clinical Relevance Based on patient-specific computational fluid dynamics simulations, the present retrospective study revealed significant difference in aortic hemodynamics between the patients with and without Takayasu arteritis (TA). To the best of our knowledge, this study is the first to evaluate hemodynamic conditions within TA, demonstrating the potential of computational flow modeling in capturing abnormal hemodynamic forces, such as high wall shear stress, resulted from irregular morphological changes. In the future, assessing the hemodynamic parameters within patients with TA during the prestenotic period, together with longitudinal computational fluid dynamics studies may allow better monitoring and management of TA