533 research outputs found

    Context-based Resource Management and Slicing for SDN-enabled 5G Smart, Connected Environments

    Get PDF
    Τα συστήματα κινητής επικοινωνίας πέμπτης γενιάς (5G) τα οποία αναμένονται τα αμέσως επόμενα χρόνια, θα αντιμετωπίσουν πρωτοφανείς απαιτήσεις όσον αφορά τον όγκο και το ρυθμό μεταδόσης δεδομένων, τις καθυστερήσεις του δικτύου, καθώς και τον αριθμό των συνδεδεμένων συσκευών. Τα μελλοντικά δικτυακά οικοσυστήματα θα περιλαμβάνουν μια πληθώρα τεχνολογιών ασύρματης επικοινωνίας (είτε τεχνολογιών 3GPP, είτε μη-3GPP) όπως το Wi-Fi, το 3G, το 4G ή LTE, το Bluetooth, κτλ. Τα σενάρια ανάπτυξης του 5G προβλέπουν έναν πολυεπίπεδο συνδυασμό μακρο- και μικρο-κυψελών, όπου πολυλειτουργικές συσκευές –οι οποίες μπορούν να υποστηρίξουν ποικιλία διαφορετικών εφαρμογών και υπηρεσιών- εξυπηρετούνται από διαφορετικές τεχνολογίες. Οι περιορισμοί που υπήρξαν στα παλιότερα συστήματα κινητών επικοινωνιών πρέπει να εξαλειφθούν, ανοίγοντας το δρόμο για ένα νέο κύμα υπηρεσιών και συνολική εμπειρία χρήστη. Ως εκ τούτου, η διαχείριση των ασύρματων πόρων μέσω της χαρτογράφησης και διανομής τους στις κινητές συσκευές, μέσω της πλέον κατάλληλης τεχνολογίας πρόσβασης, η οποία εξυπηρετεί τις ανάγκες των συγκεκριμένων υπηρεσιών/εφαρμογών αποκτά πρωταρχική σημασία. Οι κύριοι μηχανισμοί διαχείρισης πόρων δικτύου πρόσβασης δηλαδή η επιλογή κυψέλης (cell selection/reselection), η παράδοση υπηρεσίας από τη μία κυψέλη στην άλλη (handover), καθώς και ο έλεγχος εισαγωγής κλήσεων/υπηρεσιών (call/service admission control), είναι αυτοί που τελικώς θα μπορέσουν να προσφέρουν στους χρήστες εξαιρετικά υψηλή ποιότητα υπηρεσιών (Quality of Service - QoS) και εμπειρίας (Quality of Experience - QoE) προς τις πολύ απαιτητικές περιπτώσεις χρήσης του 5G. Αυτό θα γίνει εφικτό μέσω της βελτιστοποίησης του συσχετισμού-χαρτογράφησης μεταξύ των διαφορετικών (τελικών) κινητών συσκευών και των συνυπαρχόντων ασύρματων δικτύων πρόσβασης. Επιπλέον της οπτικής του χρήστη, οι Πάροχοι Δικτύων Κινητής θα είναι σε θέση να εκμεταλλευτούν τη μέγιστη αποδοτικότητα και χρήση των –ήδη δυσεύρετων- ασύρματων πόρων. Ευφυείς βελτιστοποιήσεις και αποδοτικές λύσεις όσον αφορά το κόστος και την κατανάλωση ενέργειας πρέπει επίσης να εισαχθούν στα δίκτυα 5ης γενιάς με σκοπό να προάγουν ένα συνεκτικό, στοχευμένο στο χρήστη και πολυδιάστατο οικοσύστημα πληροφοριών. Η παρούσα διατριβή αυτή εστιάζει στη Διαχείριση Ασύρματων Δικτυακών Πόρων (ΔΑΔΠ - RRM) από την οπτική των κύριων διαδικασιών που σχετίζονται με την επιλογή ασύρματης τεχνολογίας πρόσβασης και στρώματος κυψέλης (μικρο-, μάκρο κυψέλη, κτλ.), δηλαδή η επιλογή κυψέλης, η παράδοση υπηρεσίας και ο έλεγχος εισαγωγής κλήσεων/υπηρεσιών. Έπειτα, η διατριβή προχωρά ένα βήμα παραπέρα, με σκοπό να συνδέσει τη ΔΑΔΠ με μία από τις πιο πρόσφατες προσεγγίσεις διαχείρισης δικτυακών πόρων, δηλαδή τον «τεμαχισμό δικτύου» (network slicing), όπως αυτή εισάγεται σε περιβάλλοντα που χρησιμοποιούν τη μέθοδος της Δικτύωσης Βασισμένης στο Λογισμικό (Software Defined Networking), η οποία δημιουργεί μικρότερα, εικονικά τμήματα του δικτύου, προσαρμοσμένα και βελτιστοποιημένα για συκεκριμένες υπηρεσίες και αντίστοιχες απαιτήσεις. Σαν πρώτο βήμα, πραγματοποιήθηκε μια ολοκληρωμένη ανάλυση για τις υπάρχουσες λύσεις – όπως αυτές προδιαγράφονται στα πρότυπα της 3GPP, στη βιβλιογραφία, καθώς και τις σχετικές πατέντες-. Η διατριβή αυτή αρχικά εντοπίζει τους δεσμούς μεταξύ των προσπαθειών της ερευνητικής κοινότητας, των υλοποιήσεων της βιομηχανίας, καθώς και των δράσεων προτυποποίησης, σε μια προσπάθεια να επισημανθούν ρεαλιστικές λύσεις εφαρμογής, να προσδιοριστούν οι κύριοι στόχοι, τα πλεονεκτήματα, αλλά και οι ελλείψεις αυτών των προσπαθειών. Όπως θα δειχθεί, οι υπάρχουσες λύσεις προσπαθούν να εξισορροπήσουν σε ένα σημείο μεταξύ της βέλτιστης λύσης και μιας απλής υλοποίησης. Έτσι, οι λύσεις που έχουν προταθεί είτε είναι απλοποιημένες σε τέτοιο βαθμό που απομακρύνονται από μια ρεαλιστική πρόταση, και επιτυγχάνουν υπο-βέλτιστες λύσεις ή από την άλλη παρέχουν πολύ σημαντικές βελτιώσεις, αλλά η πολυπλοκότητά τους και η επιβάρυνση που επιβάλλουν στο δίκτυο (όσον αφορά για παράδειγμα κόστος σηματοδοσίας, ή επεξεργαστικής ισχύος) τις καθιστούν ελκυστικές για μια πραγματική ανάπτυξη. Προς αυτή την κατεύθυνση, η παρούσα διατριβή εισαγωγή ένα σύνολο μηχανισμών επίγνωσης πλαισίου για τη διαχείριση δικτυακών πόρων, που αποτελείται από τρεις επιμέρους μηχανισμούς με διακριτό ρόλο: Δύο από τους μηχανισμούς χρησιμοποιούν πληροφορία πλαισίου με σκοπό τη βελτίωση τη διαχείριση πόρων και και τη χαρτογράφηση μεταξύ ροών δεδομένων κινητών συσκευών και κυψέλης/τεχνολογίας δικτύου. Ο τρίτος μηχανισμός δρα με έναν ενισχυτικό ρόλο στους δύο προηγούμενους, μέσω μιας προ-επεξεργασίας που πραγματοποιεί πάνω σε πληροφορία πλαισίου, με σκοπό τον περιορισμό του κόστους της επιπλέον σηματοδοσίας που απαιτείται για την μεταφορά της πληροφορίας πλαισίου μεταξύ των διαφόρων ενδιαφερόμενων δικτυακών οντοτήτων. Εκτός από τους τρεις μηχανισμούς αυτούς, πραγματοποιήθηκαν εκτενείς μελέτες σε σχέση με αρχιτεκτονικά ζητήματα και πτυχές, στο πλαίσιο της επικείμενης αρχιτεκτονικής δικτύου 5G και χαρτογράφηση των προτεινόμενων μηχανισμών στα συστατικά στοιχεία του δικτύου 5G -όπως αυτά εισήχθησαν στα τελευταίο κείμενα προτυποποίησης της 3GPP-. Η πρώτη κύρια συμβολή της παρούσας διατριβής είναι το COmpAsS, ένας μηχανισμός επιλογής Τεχνολογίας Ασύρματης Πρόσβασης πολλαπλών κριτηρίων, με γνώμονα το περιβάλλον, το κύριο μέρος του οποίου λειτουργεί στην πλευρά του Εξοπλισμού Χρήστη (UE), ελαχιστοποιώντας με αυτό τον τρόπο τις επιβαρύνσεις σηματοδότησης στη διεπαφή αέρα και το φορτίο υπολογισμού στους σταθμούς βάσης. Ο μηχανισμός COmpAsS εκτελεί παρακολούθηση σε πραγματικό χρόνο, υιοθετώντας την Ασαφή Λογική (Fuzzy Logic -FL) ως μία από τις βασικές προσεγγίσεις αντίληψης και ανάλυσης της κατάστασης του δικτύου. Σε συνδυασμό με ένα σύνολο προκαθορισμένων κανόνων, υπολογίζει μια λίστα με τις καταλληλότερες διαθέσιμες επιλογές πρόσβασης δικτύου, για κάθε μία από τις ροές δεδομένων/υπηρεσίας που είναι ενεργές εκείνη τη στιγμή. Τα πλεονεκτήματα του COmpAsS παρουσιάζονται μέσω μιας εκτεταμένης σειράς σεναρίων προσομοίωσης, ως μέρος των περιπτώσεων χρήσης εξαιρετικά πυκνών δικτύων (UDN) 5G. Τα αποτελέσματα αποδεικνύουν τον τρόπο με τον οποίο ο προτεινόμενος μηχανισμός βελτιστοποιεί τους βασικούς δείκτες επιδόσεων (Key Performance Indicators - KPIs), όταν αντιπαρατίθεται σε έναν από τους καθιερωμένους LTE αλγορίθμους. Η δεύτερη σημαντική συμβολή της παρούσας διατριβής είναι η Μηχανή Εξόρυξης Πλαισίου και Δημιουργίας Προφίλ (Context Extraction and Profiling Engine – CEPE), ένας μηχανισμός διαχείρισης πόρων, ο οποίος αναλύει συμπεριφορικά πρότυπα των χρηστών/κινητών συσκευών, εξάγει ουσιώδη γνώση και δημιουργεί αντίστοιχα προφίλ/πρότυπα συμπεριφοράς, με σκοπό να τα χρησιμοποιήσει για βέλτιστο προγραμματισμό πόρων, καθώς επίσης και για την μελλοντική πρόβλεψη απαιτήσεων πόρων. Το CEPE συλλέγει πληροφορίες σχετικά με τους χρήστες, τις υπηρεσίες, τις κινητές συσκευές, καθώς και τις συνθήκες δικτύου, και μέσω επεξεργασίας -χωρίς σύνδεση, ετεροχρονισμένα- αποκτά ένα μοντέλο γνώσης, το οποίο στη συνέχεια χρησιμοποιείται για τη βελτιστοποίηση των κύριων μηχανισμών ΔΑΔΠ (RRM). Το προαναφερθέν μοντέλο γνώσης μεταφράζεται έπειτα σε προφίλ χρηστών/κινητών συσκευών, τα οποία εφαρμόζονται ως είσοδος κατά τις διαδικασίες ΔΑΔΠ. Η βιωσιμότητα και η εγκυρότητα του CEPE επιδεικνύεται μέσω εκτεταμένων σεναρίων προσομοίωσης. Η τρίτη σημαντική συμβολή είναι το CIP (Context Information Preprocessor), ένας μηχανισμός προεπεξεργασίας πληροφοριών πλαισίου, με στόχο τον εντοπισμό και την απόρριψη περιττών δεδομένων κατά τη σηματοδοσία πριν από την εξαγωγή της γνώσης. Το CIP θα μπορούσε να θεωρηθεί ως αναπόσπαστο μέρος των προαναφερθέντων σχημάτων σχεδίασης, δηλαδή των COmpAsS και CEPE. Ο προτεινόμενος μηχανισμός περιλαμβάνει τη συγκέντρωση και συμπίεση πληροφοριών πλαισίου σχετικά με το δίκτυο ανά μοναδικό αναγνωριστικό κινητής συσκευής/χρήστη, -όπως η διεθνής ταυτότητα συνδρομητή κινητού (IMSI)-, καθώς και τεχνικές που σχετίζονται με την αναγνώριση και την απόρριψη δεδομένων πλαισίου που δε συμβάλλουν στην βελτίωση ή διόρθωση του πρόφιλ χρήστη, πριν από οποιαδήποτε μετάδοση προς το CEPE (ή άλλο μηχανισμό ΔΑΔΠ). Οι βελτιώσεις και τα κέρδη του CIP στη διαδικασία της σηματοδοσίας απεικονίζονται μέσω λεπτομερούς αναλυτικής προσέγγισης, η οποία καθορίζεται από τις καθιερωμένες απαιτήσεις περί χρήσης 5G. Ως τελική σημαντική συμβολή αυτής της διατριβής, διεξάγεται μια εκτεταμένη ανάλυση όσον αφορά τη διασύνδεση των CEPE-COmpAsS, στο πλαίσιο της επικείμενης αρχιτεκτονικής δικτύου 5G και της χαρτογράφησης αυτών με τα τελευταία συστατικά στοιχεία του δικτύου 5G –όπως αυτά παρουσιάστηκαν στις τελευταίες δημοσιεύσεις προτυποποίησης της 3GPP -. Το έργο σε αυτή την ενότητα δείχνει πώς μπορεί να παρουσιαστεί το προτεινόμενο πλαίσιο ως μέρος των συνιστωσών του δικτύου 5G και των λειτουργιών που εισάγονται σε περιβάλλοντα με δυνατότητα SDN, όπως η προσέγγιση του «Τεμαχισμού Δικτύου», ο Μηχανισμός Ανάλυσης Δικτυακών Δεδομένων (Network Data Analytics Function – NWDAF), η λειτουργία επιλογής βέλτιστου τεμαχίου δικτύου (Network Slice Selection Function) - προς περαιτέρω βελτιστοποίηση της διανομής και της διαχείρισης των διαθέσιμων πόρων δικτύου μεταξύ των συσκευών-, καθώς και το ATSSS – Access Traffic Steering, Switching and Splitting, μια οντότητα υπεύθυνη για τη διαχείριση των ροών δεδομένων των UE –με δυνατότητες επαναδρομολόγησης, διαχωρισμού και σύνδεσης της κάθε ροής με την αντίστοιχη βέλτιστη, διαθέσιμη τεχνολογία πρόσβασης. Δύο συμπληρωματικές μελέτες περιλαμβάνονται –τέλος- σε αυτή τη διατριβή: μια αρχική ανάλυση των πολιτικών μηχανικής κυκλοφορίας (Traffic Engineering) που βασίζονται σε προφίλ χρηστών που προκύπτουν από το CEPE, καθώς και μία περίπτωση χρήσης 5G που σχετίζεται με τον τομέα του Διαδικτύου των Πραγμάτων - και πιο συγκεκριμένα την «Καλλιέργεια Ακριβείας» (Precision Farming), με σκοπό να δοθεί έμφαση σε ρητές απαιτήσεις των περιπτώσεων χρήσης 5G, όπως η επικοινωνία τύπου μηχανής κρίσιμης σημασίας (Mission-Critical Machine Type Communication).The fifth-generation (5G) mobile communication systems, which are expected to emerge in the forthcoming years, will address unprecedented demands in terms of system capacity, service latency and number of connected devices. Future 5G network ecosystems will comprise a plethora of 3GPP and non-3GGP Radio Access Technologies (RATs), such as Wi-Fi, 3G, 4G or LTE, Bluetooth, etc. Deployment scenarios envision a multi-layer combination of macro, micro and femto cells where multi-mode end devices, supporting diverse applications, are served by different technologies. Limitations previously posed by legacy generation systems need to be eliminated, paving the way to a new wave of services and overall experience for the user. As a result, the management of radio resources via mapping the end devices to the most appropriate access network becomes of paramount importance; the primary Radio Resource Management (RRM) mechanisms, i.e. cell selection/reselection, handover and call admission control will be able to offer extremely high Quality of Service (QoS) and Experience (QoE) to the users, towards the very demanding 5G use case requirements; this will be realised via an optimal association between the diverse end devices and the coexisting available access networks. Besides the user’s perspective, the Mobile Network Operators (MNOs) will be able to take advantage of the maximum efficiency and utilization over the –already scarce- wireless resources. Intelligent optimizations, as well as cost and energy efficient solutions need to be introduced in 5G networks in order to promote a consistent, user-centred and all-dimensional information ecosystem. This thesis focuses on the radio resource management (RRM) from the perspective of the primary RAT and cell layer selection processes (i.e., cell (re)selection, handover, admission control); afterwards, it goes one step beyond, in order to link the RRM with one of the latest RRM optimization approaches, i.e. the Network Slicing, as introduced in Software Defined Networking (SDN)-enabled environments, which creates smaller, virtual “portions” of the network, adapted and optimized for specific services/requirements. As a first step, a comprehensive analysis for the existing solutions -as these are specified in 3GPP standards, research papers, and patents has taken place. This thesis initially identifies the links between the research community efforts, the industry implementations, as well as the standardization efforts, in an attempt to highlight realistic solution implementations, identify the main goals, advantages and shortcomings of these efforts. As will be shown, existing solutions attempt to balance between implementation simplicity and solution optimality. Thus, solutions are either simple to implement but achieve sub-optimal solutions or provide significant improvements but their complexity and the burden placed on the network components renders them unattractive for a real-life deployment. Towards this end, this thesis introduces a context-based radio resource management (RRM) framework, comprised of three distinct mechanisms: Two out of the three mechanisms exploit contextual information with the aim of optimising the resource management and UE-RAT mapping, while the third mechanism acts with an augmenting role to the former two, by pre-processing the contextual information required by such, context-based mechanisms and –thus- by limiting the signalling cost required for communicating this contextual information among network entities. In addition to the three mechanisms, comprehensive analysis has taken place in relation to architectural aspects, in the context of the forthcoming 5G network architecture and by mapping them with the latest 5G network components –as these were introduced in the latest 3GPP work-. The first major contribution of this thesis is COmpAsS, a context-aware, multi-criteria RAT selection mechanism, the main part of which operates on the User Equipment (UE) side, minimizing signalling overhead over the air interface and computation load on the base stations. COmpAsS mechanism performs real-time monitoring and adopts Fuzzy Logic (FL) as one the core logic modules, responsible for the perception of the network situation and, in combination with a set of pre-defined rules, calculates a list of the most suitable available access network options. The merits of COmpAsS are showcased via an extensive series of simulation scenarios, as part of 5G ultra dense networks (UDN) use cases. The results prove how the proposed mechanism optimises Key Performance Indicators (KPIs), when juxtaposed to a well-established LTE handover algorithm. The second major contribution of the current thesis the Context Extraction and Profiling Engine (CEPE), a resource management framework, which analyzes user behavioral patterns, extracts meaningful knowledge and performs user profiling in order to apply it for optimal resource planning, as well as prediction of resource requirements. CEPE collects information about users, services, terminals and network conditions and –based on offline processing– derives a knowledge model, which is subsequently used for the optimization of the primary RRM mechanisms. Then, the extracted context information is translated into user profiles and is finally applied as input for enhanced cell (re)selection, handover or admission control. The viability and validity of CEPE is demonstrated via an extensive set of simulation scenarios. The third major contribution is CIP, a Context Information Pre-processing scheme, aiming to identify and discard redundant or unnecessary data during network signalling and before knowledge extraction. CIP could be considered as an integral part of the afore described profiling schemes, i.e. COmpAsS and CEPE. The module comprises aggregating and compressing mobile network-related context information per unique identifier, such as the end device’s International Mobile Subscriber Identity (IMSI), as well as techniques related to identifying and discarding user profile-redundant or unnecessary context data, before any transmission to CEPE. CIP gains are illustrated via a detailed analytical approach, guided by well-established 5G use case requirements. As a final major contribution of this thesis, a comprehensive analysis takes place with regard to the CEPE-COmpAsS interworking, in the context of the forthcoming 5G network architecture and by mapping them with the latest 5G network components –as these were introduced in the latest 3GPP work-. The work in this section shows how the proposed framework can be instantiated as part of the 5G network components and functions introduced in SDN-enabled environments, such as the Network Slicing approach, the Network Data Analytics and the Network Slice Selection Functions, towards further optimising the distribution and management of the available infrastructure and network resources among the UEs, as well as the Access Traffic Steering, Switching and Splitting (ATSSS), responsible for managing the UE data flows and mapping each single UE flow with the optimal available access technology.. Two supplementary studies are finally included in this dissertation: a preliminary analysis on traffic engineering policies based on user profiling realised by CEPE, as well as a 5G use case related to the Internet of Things domain -and more specifically, Precision Farming-, aiming to highlight explicit requirements such as mission-critical machine type communication

    A multi-factor model for range estimation in electric vehicles

    Get PDF
    Electric vehicles (EVs) are well-known for their challenges related to trip planning and energy consumption estimation. Range anxiety is currently a barrier to the adoption of EVs. One of the issues influencing range anxiety is the inaccuracy of the remaining driving range (RDR) estimate in on-board displays. RDR displays are important as they can help drivers with trip planning. The RDR is a parameter that changes under environmental and behavioural conditions. Several factors (for example, weather, and traffic) can influence the energy consumption of an EV that are not considered during the RDR estimation in traditional on-board computers or third-party applications, such as navigation or mapping applications. The need for accurate RDR estimation is growing, since this can reduce the range anxiety of drivers. One way of overcoming range anxiety is to provide trip planning applications that provide accurate estimations of the RDR, based on various factors, and which adapt to the users’ driving behaviour. Existing models used for estimating the RDR are often simplified, and do not consider all the factors that can influence it. Collecting data for each factor also presents several challenges. Powerful computing resources are required to collect, transform, and analyse the disparate datasets that are required for each factor. The aim of this research was to design a Multi-factor Model for range estimation in EVs. Five main factors that influence the energy consumption of EVs were identified from literature, namely, Route and Terrain, Driving Behaviour, Weather and Environment, Vehicle Modelling, and Battery Modelling. These factors were used throughout this research to guide the data collection and analysis processes. A Multi-factor Model was proposed based on four main components that collect, process, analyse, and visualise data from available data sources to produce estimates relating to trip planning. A proof-of-concept RDR system was developed and evaluated in field experiments, to demonstrate that the Multi-factor Model addresses the main aim of this research. The experiments were performed to collect data for each of the five factors, and to analyse their impact on energy consumption. Several machine learning techniques were used, and evaluated, for accuracy in estimating the energy consumption, from which the RDR can be derived, for a specified trip. A case study was conducted with an electric mobility programme (uYilo) in Port Elizabeth, South Africa (SA). The case study was used to investigate whether the available resources at uYilo were sufficient to provide data for each of the five factors. Several challenges were noted during the data collection. These were shortages of software applications, a lack of quality data, technical interoperability and data access between the data collection instruments and systems. Data access was a problem in some cases, since proprietary systems restrict access to external developers. The theoretical contribution of this research is a list of factors that influence RDR and a classification of machine learning techniques that can be used to estimate the RDR. The practical contributions of this research include a database of EV trips, proof-of-concept RDR estimation system, and a deployed machine learning model that can be accessed by researchers and EV practitioners. Four research papers were published and presented at local and international conferences. In addition, one conference paper was published in an accredited journal: NextComp 2017 (Appendix C), Conference Paper, Pointe aux Piments (Mauritius); SATNAC 2017 (Appendix F), Conference Paper, Barcelona (Spain); GITMA 2018 (Appendix B), Conference Paper, Mexico City (Mexico); SATNAC 2018 (Appendix G), Conference Paper, George (South Africa), and IFIP World Computer Congress 2018 (Appendix E), Journal Article

    QoE on media deliveriy in 5G environments

    Get PDF
    231 p.5G expandirá las redes móviles con un mayor ancho de banda, menor latencia y la capacidad de proveer conectividad de forma masiva y sin fallos. Los usuarios de servicios multimedia esperan una experiencia de reproducción multimedia fluida que se adapte de forma dinámica a los intereses del usuario y a su contexto de movilidad. Sin embargo, la red, adoptando una posición neutral, no ayuda a fortalecer los parámetros que inciden en la calidad de experiencia. En consecuencia, las soluciones diseñadas para realizar un envío de tráfico multimedia de forma dinámica y eficiente cobran un especial interés. Para mejorar la calidad de la experiencia de servicios multimedia en entornos 5G la investigación llevada a cabo en esta tesis ha diseñado un sistema múltiple, basado en cuatro contribuciones.El primer mecanismo, SaW, crea una granja elástica de recursos de computación que ejecutan tareas de análisis multimedia. Los resultados confirman la competitividad de este enfoque respecto a granjas de servidores. El segundo mecanismo, LAMB-DASH, elige la calidad en el reproductor multimedia con un diseño que requiere una baja complejidad de procesamiento. Las pruebas concluyen su habilidad para mejorar la estabilidad, consistencia y uniformidad de la calidad de experiencia entre los clientes que comparten una celda de red. El tercer mecanismo, MEC4FAIR, explota las capacidades 5G de analizar métricas del envío de los diferentes flujos. Los resultados muestran cómo habilita al servicio a coordinar a los diferentes clientes en la celda para mejorar la calidad del servicio. El cuarto mecanismo, CogNet, sirve para provisionar recursos de red y configurar una topología capaz de conmutar una demanda estimada y garantizar unas cotas de calidad del servicio. En este caso, los resultados arrojan una mayor precisión cuando la demanda de un servicio es mayor

    Situation-aware Edge Computing

    Get PDF
    Future wireless networks must cope with an increasing amount of data that needs to be transmitted to or from mobile devices. Furthermore, novel applications, e.g., augmented reality games or autonomous driving, require low latency and high bandwidth at the same time. To address these challenges, the paradigm of edge computing has been proposed. It brings computing closer to the users and takes advantage of the capabilities of telecommunication infrastructures, e.g., cellular base stations or wireless access points, but also of end user devices such as smartphones, wearables, and embedded systems. However, edge computing introduces its own challenges, e.g., economic and business-related questions or device mobility. Being aware of the current situation, i.e., the domain-specific interpretation of environmental information, makes it possible to develop approaches targeting these challenges. In this thesis, the novel concept of situation-aware edge computing is presented. It is divided into three areas: situation-aware infrastructure edge computing, situation-aware device edge computing, and situation-aware embedded edge computing. Therefore, the concepts of situation and situation-awareness are introduced. Furthermore, challenges are identified for each area, and corresponding solutions are presented. In the area of situation-aware infrastructure edge computing, economic and business-related challenges are addressed, since companies offering services and infrastructure edge computing facilities have to find agreements regarding the prices for allowing others to use them. In the area of situation-aware device edge computing, the main challenge is to find suitable nodes that can execute a service and to predict a node’s connection in the near future. Finally, to enable situation-aware embedded edge computing, two novel programming and data analysis approaches are presented that allow programmers to develop situation-aware applications. To show the feasibility, applicability, and importance of situation-aware edge computing, two case studies are presented. The first case study shows how situation-aware edge computing can provide services for emergency response applications, while the second case study presents an approach where network transitions can be implemented in a situation-aware manner

    Applications

    Get PDF
    Volume 3 describes how resource-aware machine learning methods and techniques are used to successfully solve real-world problems. The book provides numerous specific application examples: in health and medicine for risk modelling, diagnosis, and treatment selection for diseases in electronics, steel production and milling for quality control during manufacturing processes in traffic, logistics for smart cities and for mobile communications

    From MANET to people-centric networking: Milestones and open research challenges

    Get PDF
    In this paper, we discuss the state of the art of (mobile) multi-hop ad hoc networking with the aim to present the current status of the research activities and identify the consolidated research areas, with limited research opportunities, and the hot and emerging research areas for which further research is required. We start by briefly discussing the MANET paradigm, and why the research on MANET protocols is now a cold research topic. Then we analyze the active research areas. Specifically, after discussing the wireless-network technologies, we analyze four successful ad hoc networking paradigms, mesh networks, opportunistic networks, vehicular networks, and sensor networks that emerged from the MANET world. We also present an emerging research direction in the multi-hop ad hoc networking field: people centric networking, triggered by the increasing penetration of the smartphones in everyday life, which is generating a people-centric revolution in computing and communications

    Review of Low Voltage Load Forecasting: Methods, Applications, and Recommendations

    Full text link
    The increased digitalisation and monitoring of the energy system opens up numerous opportunities to decarbonise the energy system. Applications on low voltage, local networks, such as community energy markets and smart storage will facilitate decarbonisation, but they will require advanced control and management. Reliable forecasting will be a necessary component of many of these systems to anticipate key features and uncertainties. Despite this urgent need, there has not yet been an extensive investigation into the current state-of-the-art of low voltage level forecasts, other than at the smart meter level. This paper aims to provide a comprehensive overview of the landscape, current approaches, core applications, challenges and recommendations. Another aim of this paper is to facilitate the continued improvement and advancement in this area. To this end, the paper also surveys some of the most relevant and promising trends. It establishes an open, community-driven list of the known low voltage level open datasets to encourage further research and development.Comment: 37 pages, 6 figures, 2 tables, review pape
    corecore