Body attenuation and path loss exponent estimation for RSS-based positioning in WSN

The influence of the human body in antenna systems has significant impact in the received signal strength (RSS) of wireless transmissions. Accounting for body effect is generally considered as being able to improve position estimation based on RSS measurements. In this work we perform several experiments with a wireless sensor network, using a sensor node equipped with an inertial measurement unit (IMU), in order to obtain the relative orientation between the sensor node and multiple anchor nodes. A model of the RSS attenuation induced by the body was created using experimental measurements in a controlled environment and applied to a real-time positioning system. A path loss exponent (PLE) estimation method using RSS information from neighbor anchors was also implemented and evaluated. Weighted centroid localization (WCL) algorithm was the positioning method used in this work. When the sensor node was placed on the user’s body, accounting for body effect produced negligible improvements (6%) in the best-case scenario and consistently degraded accuracy under real conditions, whether the node was placed on the user’s body (in the order of 3%), 10 cm away (from 14% to 35%) or 20 cm away from the body (from 42% to 105%) for results in the 70th percentile. The PLE estimation method showed improvements (in the order of 11%) when the sensor node is further away from the body. Results demonstrate that the distance between sensor node and the body has an extremely important influence on the accuracy of the position estimate.This work has been supported by FCT (Fundação para a Ciência e Tecnologia) in the scope of the project UID/EEA/04436/2013. Helder D. Silva is supported by FCT under the grant SFRH/BD/78018/2011info:eu-repo/semantics/publishedVersio

Experimental study on RSS based indoor positioning algorithms

This work compares the performance of indoor positioning systems suitable for low power wireless sensor networks. The research goal is to study positioning techniques that are compatible with real-time positioning in wireless sensor networks, having low-power and low complexity as requirements. Map matching, approximate positioning (weighted centroid) and exact positioning algorithms (least squares) were tested and compared in a small predefined indoor environment. We found that, for our test scenario, weighted centroid algorithms provide better results than map matching. Least squares proved to be completely unreliable when using distances obtained by the one-slope propagation model. Major improvements in the positioning error were found when body influence was removed from the test scenario. The results show that the positioning error can be improved if the body effect in received signal strength is accounted for in the algorithms.Helder D. Silva is supported by the Portuguese Foundation for Science and Technology under the grant SFRBD/78018/2011.info:eu-repo/semantics/publishedVersio

Position Estimation of Robotic Mobile Nodes in Wireless Testbed using GENI

We present a low complexity experimental RF-based indoor localization system based on the collection and processing of WiFi RSSI signals and processing using a RSS-based multi-lateration algorithm to determine a robotic mobile node's location. We use a real indoor wireless testbed called w-iLab.t that is deployed in Zwijnaarde, Ghent, Belgium. One of the unique attributes of this testbed is that it provides tools and interfaces using Global Environment for Network Innovations (GENI) project to easily create reproducible wireless network experiments in a controlled environment. We provide a low complexity algorithm to estimate the location of the mobile robots in the indoor environment. In addition, we provide a comparison between some of our collected measurements with their corresponding location estimation and the actual robot location. The comparison shows an accuracy between 0.65 and 5 meters.Comment: (c) 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other work

Real-time rss-based indoor navigation for autonomous UAV flight

Navigation for the autonomous flight of Unmanned Aerial Vehicles (UAVs) in an indoor space has attracted much attention recently. One of the main goals of an indoor navigation system is developing an alternative method to obtain position information that can replace or complement the global positioning system. While much research has focused on vision-based indoor navigation systems, this paper aims to develop a Received Signal Strength (RSS)-based navigation system, which is a more cost effective alternative. Then, the position and attitude of a UAV can be computed by the fusion of RSS measurements and measurements from the onboard inertial measurement unit. In order to improve the estimation accuracy, we first consider a mathematical model of the RSS-based navigation system and formulate optimization problems to compute the parameter values which minimize the RSS measurement error. Using the optimal parameters, an autonomous flight system is developed whose estimator and controller components are designed to work well with the RSS-based navigation system. Simulations and experiments using a quadrotor demonstrate the feasibility and performance of the proposed RSS-based navigation system for UAVs operating in indoor environments

Indoor positioning system for wireless sensor networks

Tese de Doutoramento - Programa Doutoral em Engenharia Electrónica e ComputadoresPositioning technologies are ubiquitous nowadays. From the implementation of the global positioning system (GPS) until now, its evolution, acceptance and spread has been unanimous, due to the underlying advantages the system brings. Currently, these systems are present in many different scenarios, from the home to the movie theatre, at work, during a walk in the park. Many applications provide useful information, based on the current position of the user, in order to provide results of interest. Positioning systems can be implemented in a wide range of contexts: in hospitals to locate equipment and guide patients to the necessary resources, or in public spaces like museums, to guide tourists during visits. They can also be used in a gymnasium to point the user to his next workout machine and, simultaneously, gather information regarding his fitness plan. In a congress or conference, the positioning system can be used to provide information to its participants about the on-going presentations. Devices can also be monitored to prevent thefts. Privacy and security issues are also important in positioning systems. A user might not want to be localized or its location to be known, permanently or during a time interval, in different locations. This information is therefore sensitive to the user and influences directly the acceptance of the system itself. Concerning outdoor systems, GPS is in fact the system of reference. However, this system cannot be used in indoor environment, due to the high attenuation of the satellite signals from non-line-of-sight conditions. Another issue related to GPS is the power consumption. The integration of these devices with wireless sensor networks becomes prohibitive, due to the low power consumption profile associated with devices in this type of networks. As such, this work proposes an indoor positioning system for wireless sensor networks, having in consideration the low energy consumption and low computational capacity profile. The proposed indoor positioning system is composed of two modules: the received signal strength positioning module and the stride and heading positioning module. For the first module, an experimental performance comparison between several received signal strength based algorithms was conducted in order to assess its performance in a predefined indoor environment. Modifications to the algorithm with higher performance were implemented and evaluated, by introducing a model of the effect of the human body in the received signal strength. In the case of the second module, a stride and heading system was proposed, which comprises two subsystems: the stride detection and stride length estimation system to detect strides and infer the travelled distance, and an attitude and heading reference system to provide the full three-dimensional orientation stride-by-stride. The stride detection enabled the identification of the gait cycle and detected strides with an error percentage between 0% and 0.9%. For the stride length estimation two methods were proposed, a simplified method, and an improved method with higher computational requirements than the former. The simplified method estimated the total distance with an error between 6.7% and 7.7% of total travelled distance. The improved method achieved an error between 1.2% and 3.7%. Both the stride detection and the improved stride length estimation methods were compared to other methods in the literature with favourable results. For the second subsystem, this work proposed a quaternion-based complementary filter. A generic formulation allows a simple parameterization of the filter, according to the amount of external influences (accelerations and magnetic interferences) that are expected, depending on the location that the device is to be attached on the human body. The generic formulation enables the inclusion/exclusion of components, thus allowing design choices according to the needs of applications in wireless sensor networks. The proposed method was compared to two other existing solutions in terms of robustness to interferences and execution time, also presenting a favourable outcome.Os sistemas de posicionamento fazem parte do quotidiano. Desde a implementação do sistema GPS (Global Positioning System) até aos dias que correm, a evolução, aceitação e disseminação destes sistemas foi unânime, derivada das vantagens subjacentes da sua utilização. Hoje em dia, eles estão presentes nos mais variados cenários, desde o lar até́ à sala de cinema, no trabalho, num passeio ao ar livre. São várias as aplicações que nos fornecem informação útil, usando como base a descrição da posição atual, de modo a produzir resultados de maior interesse para os utilizadores. Os sistemas de posicionamento podem ser implementados nos mais variados contextos, como por exemplo: nos hospitais, para localizar equipamento e guiar os pacientes aos recursos necessários, ou nas grandes superfícies públicas, como por exemplo museus, para guiar os turistas durante as visitas. Podem ser igualmente utilizados num ginásio para indicar ao utilizador qual a máquina para onde se deve dirigir durante o seu treino e, simultaneamente, obter informação acerca desta mesma máquina. Num congresso ou conferência, o sistema de localização pode ser utilizado para fornecer informação aos seus participantes sobre as apresentações que estão a decorrer no momento. Os dispositivos também podem ser monitorizados para prevenir roubos. Existem também questões de privacidade e segurança associados aos sistemas de posicionamento. Um utilizador poderá não desejar ser localizado ou que a sua localização seja conhecida, permanentemente ou num determinado intervalo de tempo, num ou em vários locais. Esta informação é por isso sensível ao utilizador e influencia diretamente a aceitação do próprio sistema. No que diz respeito aos sistemas utilizados no exterior, o GPS (ou posicionamento por satélite) é de facto o sistema mais utilizado. No entanto, em ambiente interior este sistema não pode ser usado, por causa da grande atenuação dos sinais provenientes dos satélites devido à falta de linha de vista. Um outro problema associado ao recetor GPS está relacionado com as suas características elétricas, nomeadamente os consumos energéticos. A integração destes dispositivos nas redes de sensores sem fios torna-se proibitiva, devido ao perfil de baixo consumo associado a estas redes. Este trabalho propõe um sistema de posicionamento para redes de sensores sem fio em ambiente interior, tendo em conta o perfil de baixo consumo de potência e baixa capacidade de processamento. O sistema proposto é constituído por dois módulos: o modulo de posicionamento por potência de sinal recebido e o módulo de navegação inercial pedestre. Para o primeiro módulo foi feita uma comparação experimental entre vários algoritmos que utilizam a potência do sinal recebido, de modo a avaliar a sua utilização num ambiente interior pré-definido. Ao algoritmo com melhor prestação foram implementadas e testadas modificações, utilizando um modelo do efeito do corpo na potência do sinal recebido. Para o segundo módulo foi proposto um sistema de navegação inercial pedestre. Este sistema é composto por dois subsistemas: o subsistema de deteção de passos e estimação de distância percorrida; e o subsistema de orientação que fornece a direção do movimento do utilizador, passo a passo. O sistema de deteção de passos proposto permite a identificação das fases da marcha, detetando passos com um erro entre 0% e 0.9%. Para o sistema de estimação da distância foram propostos dois métodos: um método simplificado de baixa complexidade e um método melhorado, mas com maiores requisitos computacionais quando comparado com o primeiro. O método simplificado estima a distância total com erros entre 6.7% e 7.7% da distância percorrida. O método melhorado por sua vez alcança erros entre 1.2% e 3.7%. Ambos os sistemas foram comparados com outros sistemas da literatura apresentando resultados favoráveis. Para o sistema de orientação, este trabalho propõe um filtro complementar baseado em quaterniões. É utilizada uma formulação genérica que permite uma parametrização simples do filtro, de acordo com as influências externas (acelerações e interferências magnéticas) que são expectáveis, dependendo da localização onde se pretende colocar o dispositivo no corpo humano. O algoritmo desenvolvido permite a inclusão/exclusão de componentes, permitindo por isso liberdade de escolha para melhor satisfazer as necessidades das aplicações em redes de sensores sem fios. O método proposto foi comparado com outras soluções em termos de robustez a interferências e tempo de execução, apresentando também resultados positivos

Localization Of Sensors In Presence Of Fading And Mobility

The objective of this dissertation is to estimate the location of a sensor through analysis of signal strengths of messages received from a collection of mobile anchors. In particular, a sensor node determines its location from distance measurements to mobile anchors of known locations. We take into account the uncertainty and fluctuation of the RSS as a result of fading and take into account the decay of the RSS which is proportional to the transmitter-receiver distance power raised to the PLE. The objective is to characterize the channel in order to derive accurate distance estimates from RSS measurements and then utilize the distance estimates in locating the sensors. To characterize the channel, two techniques are presented for the mobile anchors to periodically estimate the channel\u27s PLE and fading parameter. Both techniques estimate the PLE by solving an equation via successive approximations. The formula in the first is stated directly from MLE analysis whereas in the second is derived from a simple probability analysis. Then two distance estimates are proposed, one based on a derived formula and the other based on the MLE analysis. Then a location technique is proposed where two anchors are sufficient to uniquely locate a sensor. That is, the sensor narrows down its possible locations to two when collects RSS measurements transmitted by a mobile anchor, then uniquely determines its location when given a distance to the second anchor. Analysis shows the PLE has no effect on the accuracy of the channel characterization, the normalized error in the distance estimation is invariant to the estimated distance, and accurate location estimates can be achieved from a moderate sample of RSS measurements

Adaptive indoor positioning model based on WLAN-fingerprinting for dynamic and multi-floor environments

The Global Positioning System demonstrates the significance of Location Based Services but it cannot be used indoors due to the lack of line of sight between satellites and receivers. Indoor Positioning Systems are needed to provide indoor Location Based Services. Wireless LAN fingerprints are one of the best choices for Indoor Positioning Systems because of their low cost, and high accuracy, however they have many drawbacks: creating radio maps is time consuming, the radio maps will become outdated with any environmental change, different mobile devices read the received signal strength (RSS) differently, and peoples’ presence in LOS between access points and mobile device affects the RSS. This research proposes a new Adaptive Indoor Positioning System model (called DIPS) based on: a dynamic radio map generator, RSS certainty technique and peoples’ presence effect integration for dynamic and multi-floor environments. Dynamic in our context refers to the effects of people and device heterogeneity. DIPS can achieve 98% and 92% positioning accuracy for floor and room positioning, and it achieves 1.2 m for point positioning error. RSS certainty enhanced the positioning accuracy for floor and room for different mobile devices by 11% and 9%. Then by considering the peoples’ presence effect, the error is reduced by 0.2 m. In comparison with other works, DIPS achieves better positioning without extra devices

A Review of pedestrian indoor positioning systems for mass market applications

In the last decade, the interest in Indoor Location Based Services (ILBS) has increased stimulating the development of Indoor Positioning Systems (IPS). In particular, ILBS look for positioning systems that can be applied anywhere in the world for millions of users, that is, there is a need for developing IPS for mass market applications. Those systems must provide accurate position estimations with minimum infrastructure cost and easy scalability to different environments. This survey overviews the current state of the art of IPSs and classifies them in terms of the infrastructure and methodology employed. Finally, each group is reviewed analysing its advantages and disadvantages and its applicability to mass market applications