Investigation of the tolerance of wavelength-routed optical networks to traffic load variations.

This thesis focuses on the performance of circuit-switched wavelength-routed optical network with unpredictable traffic pattern variations. This characteristic of optical networks is termed traffic forecast tolerance. First, the increasing volume and heterogeneous nature of data and voice traffic is discussed. The challenges in designing robust optical networks to handle unpredictable traffic statistics are described. Other work relating to the same research issues are discussed. A general methodology to quantify the traffic forecast tolerance of optical networks is presented. A traffic model is proposed to simulate dynamic, non-uniform loads, and used to test wavelength-routed optical networks considering numerous network topologies. The number of wavelengths required and the effect of the routing and wavelength allocation algorithm are investigated. A new method of quantifying the network tolerance is proposed, based on the calculation of the increase in the standard deviation of the blocking probabilities with increasing traffic load non-uniformity. The performance of different networks are calculated and compared. The relationship between physical features of the network topology and traffic forecast tolerance is investigated. A large number of randomly connected networks with different sizes were assessed. It is shown that the average lightpath length and the number of wavelengths required for full interconnection of the nodes in static operation both exhibit a strong correlation with the network tolerance, regardless of the degree of load non-uniformity. Finally, the impact of wavelength conversion on network tolerance is investigated. Wavelength conversion significantly increases the robustness of optical networks to unpredictable traffic variations. In particular, two sparse wavelength conversion schemes are compared and discussed: distributed wavelength conversion and localized wavelength conversion. It is found that the distributed wavelength conversion scheme outperforms localized wavelength conversion scheme, both with uniform loading and in terms of the network tolerance. The results described in this thesis can be used for the analysis and design of reliable WDM optical networks that are robust to future traffic demand variations

Wavelength converter sharing in asynchronous optical packet/burst switching: An exact blocking analysis for markovian arrivals

Cataloged from PDF version of article.In this paper, we study the blocking probabilities in a wavelength division multiplexing-based asynchronous bufferless optical packet/burst switch equipped with a bank of tuneable wavelength converters dedicated to each output fiber line. Wavelength converter sharing, also referred to as partial wavelength conversion, corresponds to the case of a number of converters shared amongst a larger number of wavelength channels. In this study, we present a probabilistic framework for exactly calculating the packet blocking probabilities for optical packet/burst switching systems utilizing wavelength converter sharing. In our model, packet arrivals at the optical switch are first assumed to be Poisson and later generalized to the more general Markovian arrival process to cope with very general traffic patterns whereas packet lengths are assumed to be exponentially distributed. As opposed to the existing literature based on approximations and/or simulations, we formulate the problem as one of finding the steady-state solution of a continuous-time Markov chain with a block tridiagonal infinitesimal generator. To find such solutions, we propose a numerically efficient and stable algorithm based on block tridiagonal LU factorizations. We show that exact blocking probabilities can be efficiently calculated even for very large systems and rare blocking probabilities, e.g., systems with 256 wavelengths per fiber and blocking probabilities in the order of 10−40. Relying on the stability and speed of the proposed algorithm, we also provide a means of provisioning wavelength channels and converters in optical packet/burst switching systems

Towards An Optimal Core Optical Network Using Overflow Channels

This dissertation is based on a traditional circuit switched core WDM network that is supplemented by a pool of wavelengths that carry optical burst switched overflow data. These overflow channels function to absorb channel overflows from traditional circuit switched networks and they also provide wavelengths for newer, high bandwidth applications. The channel overflows that appear at the overflow layer as optical bursts are either carried over a permanently configured, primary light path, or over a burst-switched, best-effort path while traversing the core network. At every successive hop along the best effort path, the optical bursts will attempt to enter a primary light path to its destination. Thus, each node in the network is a Hybrid Node that will provide entry for optical bursts to hybrid path that is made of a point to point, pre-provisioned light path or a burst switched path. The dissertation's main outcome is to determine the cost optimality of a Hybrid Route, to analyze cost-effectiveness of a Hybrid Node and compare it to a route and a node performing non-hybrid operation, respectively. Finally, an example network that consists of several Hybrid Routes and Hybrid Nodes is analyzed for its cost-effectiveness. Cost-effectiveness and optimality of a Hybrid Route is tested for its dependency on the mean and variance of channel demands offered to the route, the number of sources sharing the route, and the relative cost of a primary and overflow path called path cost ratio. An optimality condition that relates the effect of traffic statistics to the path cost ratio is analytically derived and tested. Cost-effectiveness of a Hybrid Node is compared among different switching fabric architecture that is used to construct the Hybrid Node. Broadcast-Select, Benes and Clos architectures are each considered with different degrees of chip integration. An example Hybrid Network that consists of several Hybrid Routes and Hybrid Nodes is found to be cost-effective and dependent of the ratio of switching to transport costs

Call admission and routing in telecommunication networks.

by Kit-man Chan.Thesis (M.Phil.)--Chinese University of Hong Kong, 1994.Includes bibliographical references (leaves 82-86).Chapter 1 --- Introduction --- p.1Chapter 1.1 --- Overview of Integrated Service Digital Networks --- p.1Chapter 1.2 --- Multirate Loss Networks --- p.5Chapter 1.3 --- Previous Work --- p.7Chapter 1.4 --- Organization --- p.11Chapter 1.5 --- Publications --- p.12Chapter 2 --- Call Admission in Multirate Loss Networks --- p.13Chapter 2.1 --- Introduction --- p.13Chapter 2.2 --- Two Adaptive Routing Rules --- p.15Chapter 2.3 --- Call Admission Policies --- p.17Chapter 2.4 --- Analysis of Call Admission Policies --- p.25Chapter 2.4.1 --- "The CS, LO, GB and the EB Policies" --- p.25Chapter 2.4.2 --- The DP Policy --- p.29Chapter 2.5 --- Performance Comparisons --- p.32Chapter 2.6 --- Concluding Remarks --- p.35Chapter 3 --- Least Congestion Routing in Multirate Loss Networks --- p.41Chapter 3.1 --- Introduction --- p.41Chapter 3.2 --- The M2 and MTB Routings --- p.42Chapter 3.2.1 --- M2 Routing --- p.43Chapter 3.2.2 --- MTB Routing --- p.43Chapter 3.3 --- Bandwidth Sharing Policies and State Aggregation --- p.45Chapter 3.4 --- Analysis of M2 Routing --- p.47Chapter 3.5 --- Analysis of MTB Routing --- p.50Chapter 3.6 --- Numerical Results and Discussions --- p.53Chapter 3.7 --- Concluding Remarks --- p.56Chapter 4 --- The Least Congestion Routing in WDM Lightwave Networks --- p.60Chapter 4.1 --- Introduction --- p.60Chapter 4.2 --- Architecture and Some Design Issues --- p.62Chapter 4.3 --- The Routing Rule --- p.66Chapter 4.4 --- Analysis of the LC Routing Rule --- p.67Chapter 4.4.1 --- Fixed Point Model --- p.67Chapter 4.4.2 --- Without Direct-link Priority --- p.68Chapter 4.4.3 --- With Direct-link Priority --- p.72Chapter 4.5 --- Performance Comparisons --- p.73Chapter 4.6 --- Concluding Remarks --- p.75Chapter 5 --- Conclusions and Future Work --- p.79Chapter 5.1 --- Future Work --- p.8

Equivalent random analysis of a buffered optical switch with general interarrival times

We propose an approximate analytic model of an optical switch with fibre delay lines and wavelength converters by employing Equivalent Random Theory. General arrival traffic is modelled by means of Gamma-distributed interarrival times. The analysis is formulated in terms of virtual traffic flows within the optical switch from which we derive expressions for burst blocking probability, fibre delay line occupancy and mean delay. Emphasis is on approximations that give good numerical efficiency so that the method can be useful for formulating dimensioning problems for large-scale networks. Numerical solution values from the proposed analysis method compare well with results from a discrete-event simulation of an optical burst switch

Analytic modelling and resource dimensioning of optical burst switched networks

The realisation of optical network architectures may hold the key to delivering the enormous bandwidth demands of next generation Internet applications and services. Optical Burst Switching (OBS) is a potentially cost-effective switching technique that can satisfy these demands by offering a high bit rate transport service that is bandwidth-efficient under dynamic Internet traffic loads. Although various aspects of OBS performance have been extensively investigated, there remains a need to systematically assess the cost/performance trade-offs involved in dimensioning OBS switch resources in a network. This goal is essential in enabling the future deployment of OBS but poses a significant challenge due to the complexity of obtaining tractable mathematical models applicable to OBS network optimisation. The overall aim of this thesis lies within this challenge. This thesis firstly develops a novel analytic performance model of an OBS node where burst contention is resolved by combined use of Tuneable Wavelength Converters (TWCs) and Fibre Delay Lines (FDLs) connected in an efficient share-per-node configuration. The model uses a two-moment traffic representation that gives a good trade-off between accuracy and complexity, and is suitable for extension to use in network modelling. The OBS node model is then used to derive an approximate analytic model of an OBS network of switches equipped with TWCs and FDLs, again maintaining a two-moment traffic model for each end-to-end traffic path in the network. This allows evaluation of link/route loss rates under different offered traffic characteristics, whereas most OBS network models assume only a single-moment traffic representation. In the last part of this thesis, resource dimensioning of OBS networks is performed by solving single and multi-objective optimisation problems based on the analytic network model. The optimisation objectives relate to equipment cost minimisation and throughput maximisation under end-to-end loss rate constraints. Due to non-convexity of the network performance constraint equations, a search heuristic approach has been taken using a constraint-handling genetic algorithm

Survivability stategies in all optical networks.

Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, 2006.Thesis (M.Sc.)-University of KwaZulu-Natal, 2006.Recent advances in fiber optics technology have enabled extremely high-speed transport of different forms of data, on multiple wavelengths of an optical fiber, using Dense Wavelength Division Multiplexing (DWDM). It has now become possible to deploy high-speed, multi-service networks using DWDM technology. As the amount of traffic carried has increased, any single failure can be catastrophic. Survivability becomes indispensable in such networks. Therefore, it is imperative to design networks that can quickly and efficiently recover from failures. Most research to date in survivable optical network design and operation focuses on single link failures, however, the occurrence of multiple-link failures are not uncommon in networks today. Multi-link failure scenarios can arise out of two common situations. First, an arbitrary link may fail in the network, and before that link can be repaired, another link fails, thus creating a multi-link failure sequence. Secondly, it might happen in practice that two distinct physical links may be routed via the same common duct or physical channel. A failure at that shared physical location creates a logical multiple-link failure. In this dissertation, we conduct an intensive study of mechanisms for achieving survivability in optical networks. From the many mechanisms presented in the literature the focus of this work was on protection as a mechanism of survivability. In particular four protection schemes were simulated and their results analyzed to ascertain which protection scheme achieves the best survivability in terms of number of wavelengths recovered for a specific failure scenario. A model network was chosen and the protection schemes were evaluated for both single and multiple link and node failures. As an indicator of the performance of these protection schemes over a period of time average service availability and average loss in traffic for each protection scheme was also simulated. Further simulations were conducted to observe the percentage link and node utilization of each scheme hence allowing us to determine the strain each protection scheme places on network resources when traffic in the network increases. Finally based on these simulation results, recommendations of which protection scheme and under what failure conditions they should be used are made.Recent advances in fiber optics technology have enabled extremely high-speed transpor

Performance of WDM transport networks

Wavelength division multiplexed point-to-point transport is becoming commonplace in wide area networks. With the expectation that the next step is end-to-end networking of wavelengths (in the optical domain without conversion to electronics), there is a need for new design techniques, a new understanding of the performance issues, and a new performance evaluation methodology in such networks. This paper describes approaches to that end, summarizes research results, and points to open problems

IP multicast over WDM networks

Ph.DDOCTOR OF PHILOSOPH