537 research outputs found
Device-to-Device Communications in the Millimeter Wave Band: A Novel Distributed Mechanism
In spite of its potential advantages, the large-scale implementation of the
device-to-device (D2D) communications has yet to be realized, mainly due to
severe interference and lack of enough bandwidth in the microwave (W)
band. Recently, exploiting the millimeter wave (mmW) band for D2D
communications has attracted considerable attention as a potential solution to
these challenges. However, its severe sensitivity to blockage along with its
directional nature make the utilization of the mmW band a challenging task as
it requires line-of-sight (LOS) link detection and careful beam alignment
between the D2D transceivers. In this paper, we propose a novel distributed
mechanism which enables the D2D devices to discover unblocked LOS links for the
mmW band communication. Moreover, as such LOS links are not always available,
the proposed mechanism allows the D2D devices to switch to the W band if
necessary. In addition, the proposed mechanism detects the direction of the LOS
links to perform the beam alignment. We have used tools from stochastic
geometry to evaluate the performance of the proposed mechanism in terms of the
signal-to-interference-plus-noise ratio (SINR) coverage probability. The
performance of the proposed algorithm is then compared to the one of the single
band (i.e., W/mmW) communication. The simulation results show that the
proposed mechanism considerably outperforms the single band communication.Comment: 6 Pages, 6 Figures, Accepted for presentation in Wireless
Telecommunication Symposium (WTS'18
Boosting 5G mm-Wave IAB Reliability with Reconfigurable Intelligent Surfaces
The introduction of the mm-Wave spectrum into 5G NR promises to bring about
unprecedented data throughput to future mobile wireless networks but comes with
several challenges. Network densification has been proposed as a viable
solution to increase RAN resilience, and the newly introduced IAB is considered
a key enabling technology with compelling cost-reducing opportunities for such
dense deployments. Reconfigurable Intelligent Surfaces (RIS) have recently
gained extreme popularity as they can create Smart Radio Environments by EM
wave manipulation and behave as inexpensive passive relays. However, it is not
yet clear what role this technology can play in a large RAN deployment. With
the scope of filling this gap, we study the blockage resilience of realistic
mm-Wave RAN deployments that use IAB and RIS. The RAN layouts have been
optimised by means of a novel mm-Wave planning tool based on MILP formulation.
Numerical results show how adding RISs to IAB deployments can provide high
blockage resistance levels while significantly reducing the overall network
planning cost
On Topology Optimization and Routing in Integrated Access and Backhaul Networks: A Genetic Algorithm-Based Approach
In this paper, we study the problem of topology optimization and routing in integrated access and backhaul (IAB) networks, as one of the promising techniques for evolving 5G networks. We study the problem from different perspectives. We develop efficient genetic algorithm-based schemes for both IAB node placement and non-IAB backhaul link distribution, and evaluate the effect of routing on bypassing temporal blockages. Here, concentrating on millimeter wave-based communications, we study the service coverage probability, defined as the probability of the event that the user equipments\u27 (UEs) minimum rate requirements are satisfied. Moreover, we study the effect of different parameters such as the antenna gain, blockage, and tree foliage on the system performance. Finally, we summarize the recent Rel-16 as well as the upcoming Rel-17 3GPP discussions on routing in IAB networks, and discuss the main challenges for enabling mesh-based IAB networks. As we show, with a proper network topology, IAB is an attractive approach to enable the network densification required by 5G and beyond
On Integrated Access and Backhaul Networks: Current Status and Potentials
In this paper, we introduce and study the potentials and challenges of
integrated access and backhaul (IAB) as one of the promising techniques for
evolving 5G networks. We study IAB networks from different perspectives. We
summarize the recent Rel-16 as well as the upcoming Rel-17 3GPP discussions on
IAB, and highlight the main IAB-specific agreements on different protocol
layers. Also, concentrating on millimeter wave-based communications, we
evaluate the performance of IAB networks in both dense and suburban areas.
Using a finite stochastic geometry model, with random distributions of IAB
nodes as well as user equipments (UEs) in a finite region, we study the service
coverage rate defined as the probability of the event that the UEs' minimum
rate requirements are satisfied. We present comparisons between IAB and hybrid
IAB/fiber-backhauled networks where a part or all of the small base stations
are fiber-connected. Finally, we study the robustness of IAB networks to
weather and various deployment conditions and verify their effects, such as
blockage, tree foliage, rain as well as antenna height/gain on the coverage
rate of IAB setups, as the key differences between the fiber-connected and IAB
networks. As we show, IAB is an attractive approach to enable the network
densification required by 5G and beyond.Comment: Revised manuscript in IEEE Open Journal of the Communications Societ
Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey
In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner
Integrated Access and Backhaul for 5G and Beyond (6G)
Enabling network densification to support coverage-limited millimeter wave (mmWave) frequencies is one of the main requirements for 5G and beyond. It is challenging to connect a high number of base stations (BSs) to the core network via a transport network. Although fiber provides high-rate reliable backhaul links, it requires a noteworthy investment for trenching and installation, and could also take a considerable deployment time. Wireless backhaul, on the other hand, enables fast installation and flexibility, at the cost of data rate and sensitivity to environmental effects. For these reasons, fiber and wireless backhaul have been the dominant backhaul technologies for decades. Integrated access and backhaul (IAB), where along with celluar access services a part of the spectrum available is used to backhaul, is a promising wireless solution for backhauling in 5G and beyond. To this end, in this thesis we evaluate, analyze and optimize IAB networks from various perspectives. Specifically, we analyze IAB networks and develop effective algorithms to improve service coverage probability. In contrast to fiber-connected setups, an IAB network may be affected by, e.g., blockage, tree foliage, and rain loss. Thus, a variety of aspects such as the effects of tree foliage, rain loss, and blocking are evaluated and the network performance when part of the network being non-IAB backhauled is analysed. Furthermore, we evaluate the effect of deployment optimization on the performance of IAB networks.First, in Paper A, we introduce and analyze IAB as an enabler for network densification. Then, we study the IAB network from different aspects of mmWave-based communications: We study the network performance for both urban and rural areas considering the impacts of blockage, tree foliage, and rain. Furthermore, performance comparisons are made between IAB and networks of which all or part of small BSs are fiber-connected. Following the analysis, it is observed that IAB may be a good backhauling solution with high flexibility and low time-to-market. The second part of the thesis focuses on improving the service coverage probability by carrying out topology optimization in IAB networks focusing on mmWave communication for different parameters, such as blockage, tree foliage, and antenna gain. In Paper B, we study topology optimization and routing in IAB networks in different perspectives. Thereby, we design efficient Genetic algorithm (GA)-based methods for IAB node distribution and non-IAB backhaul link placement. Furthermore, we study the effect of routing in the cases with temporal blockages. Finally, we briefly study the recent standardization developments, i.e., 3GPP Rel-16 as well as the\ua0Rel-17 discussions on routing. As the results show, with a proper planning on network deployment, IAB is an attractive solution to densify the networks for 5G and beyond. Finally, we focus on improving the performance of IAB networks with constrained deployment optimization. In Paper C, we consider various IAB network models while presenting different algorithms for constrained deployment optimization. Here, the constraints are coming from either inter-IAB distance limitations or geographical restrictions. As we show, proper network planning can considerably improve service coverage probability of IAB networks with deployment constraints
- …