Platform for quality of experience evaluation in real time applications over LTE networks

Dissertação apresentado à Escola Superior de Tecnologia do Instituto Politécnico de Castelo Branco para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Desenvolvimento de Software e Sistemas InterativosAtualmente existem vário simuladores para várias tecnologias de redes sem fios (LTE, UMTS, Wi-Fi ...). Quase todos eles simulam valores para diferentes utilizadores como por exemplo de taxas de transferência (Mbit/s), a potência recebida, a SNR, entre outros valores, dependendo do tipo de simulação. A maioria dos resultados apresentados pelos simuladores correspondem apenas a números, como valores de taxa de transferência ou BER. Então, é difícil entender o impacto desses valores numa comunicação real. Pretende-se com este projeto dar a utilizador por exemplo 2 Mbits/s de taxa de transferência (uplink/downlink), um valor BER de 1x10−6 ou uma potência recebida em torno 1NW obtidos num cenário de simulação e em tempo real e para um cenário real o utilizador experienciar as condições de comunicação e interatividade com as mesmas aplicações utilizadas na realidade. O desenvolvimento da plataforma proposta neste projeto tem como objetivo verificar e avaliar em tempo real a QoS e a QoE obtida para um utilizador simulado naquele momento e para o cenário simulado. Isso permite que os utilizadores experienciem a interatividade com aplicações para diferentes cenários de simulação. Esta plataforma tem como objetivo converter os valores numéricos obtidos apenas por ferramentas de simulação, para uma experiência em tempo real para um determinado cenário simulado. Inicialmente, a rede pretendida a simular é LTE, mas outros protocolos e tipos de rede poderão ser utilizados e testados nesta plataforma, desde que sejam baseados no protocolo IP, tal como o LTE.Abstract: There are many simulators for various wireless technologies (LTE, UMTS, WI-FI …). Almost all of them have different values for users as bitrate, received power, SNR, among other values depending on the simulation type. Most of the simulators results are just numbers like bitrate or BER values. So is difficult to understand the impact of those values in a real communication. It is intended with this project to give a user for instance 2Mbits/s bitrate, a BER value of 1x10−6 or a received power around 1NW in a simulation scenario and he could in real time and real scenario experience the communication conditions and interactivity with applications. The development of the platform proposed in this project aims to verify in real time the QoS and QoE which simulated user experiences in that moment on the simulated scenario. This allows users to experience the interactivity with applications for different simulation scenarios. This platform aims to convert the values merely numerical, obtained by simulation tools, to a real-time experience for the scenario simulated. Initially the target network is LTE, but other network protocols will be allowed to use ant test, since that they are IP based protocols like LTE

Cooperative Uplink Inter-Cell Interference (ICI) Mitigation in 5G Networks

In order to support the new paradigm shift in fifth generation (5G) mobile communication, radically different network architectures, associated technologies and network operation algorithms, need to be developed compared to existing fourth generation (4G) cellular solutions. The evolution toward 5G mobile networks will be characterized by an increasing number of wireless devices, increasing device and service complexity, and the requirement to access mobile services ubiquitously. To realise the dramatic increase in data rates in particular, research is focused on improving the capacity of current, Long Term Evolution (LTE)-based, 4G network standards, before radical changes are exploited which could include acquiring additional spectrum. The LTE network has a reuse factor of one; hence neighbouring cells/sectors use the same spectrum, therefore making the cell-edge users vulnerable to heavy inter cell interference in addition to the other factors such as fading and path-loss. In this direction, this thesis focuses on improving the performance of cell-edge users in LTE and LTE-Advanced networks by initially implementing a new Coordinated Multi-Point (CoMP) technique to support future 5G networks using smart antennas to mitigate cell-edge user interference in uplink. Successively a novel cooperative uplink inter-cell interference mitigation algorithm based on joint reception at the base station using receiver adaptive beamforming is investigated. Subsequently interference mitigation in a heterogeneous environment for inter Device-to-Device (D2D) communication underlaying cellular network is investigated as the enabling technology for maximising resource block (RB) utilisation in emerging 5G networks. The proximity of users in a network, achieving higher data rates with maximum RB utilisation (as the technology reuses the cellular RB simultaneously), while taking some load off the evolved Node B (eNodeB) i.e. by direct communication between User Equipment (UE), has been explored. Simulation results show that the proximity and transmission power of D2D transmission yields high performance gains for D2D receivers, which was demonstrated to be better than that of cellular UEs with better channel conditions or in close proximity to the eNodeB in the network. It is finally demonstrated that the application, as an extension to the above, of a novel receiver beamforming technique to reduce interference from D2D users, can further enhance network performance. To be able to develop the aforementioned technologies and evaluate the performance of new algorithms in emerging network scenarios, a beyond the-state-of-the-art LTE system-level-simulator (SLS) was implemented. The new simulator includes Multiple-Input Multiple-Output (MIMO) antenna functionalities, comprehensive channel models (such as Wireless World initiative New Radio II i.e. WINNER II) and adaptive modulation and coding schemes to accurately emulate the LTE and LTE-A network standards

Investigation on Evolving Single-Carrier NOMA into Multi-Carrier NOMA in 5G

© 2013 IEEE. Non-orthogonal multiple access (NOMA) is one promising technology, which provides high system capacity, low latency, and massive connectivity, to address several challenges in the fifth-generation wireless systems. In this paper, we first reveal that the NOMA techniques have evolved from single-carrier NOMA (SC-NOMA) into multi-carrier NOMA (MC-NOMA). Then, we comprehensively investigated on the basic principles, enabling schemes and evaluations of the two most promising MC-NOMA techniques, namely sparse code multiple access (SCMA) and pattern division multiple access (PDMA). Meanwhile, we consider that the research challenges of SCMA and PDMA might be addressed with the stimulation of the advanced and matured progress in SC-NOMA. Finally, yet importantly, we investigate the emerging applications, and point out the future research trends of the MC-NOMA techniques, which could be straightforwardly inspired by the various deployments of SC-NOMA

Hybrid Radio Resource Management with Limited Channel Feedback Information in Relay enhanced OFDMA Networks

In orthogonal frequency division multiple access based mobile networks buffer aided nontransparent in-band half duplex decode-and-forward relay nodes aim to improve coverage and capacity under fairness considerations. The existing centralized radio resource management and inter-cell interference coordination schemes can achieve this goals, although at the cost of a heavy signalling overhead. This cost is a critical issue, particularly for the frequency division duplex downlink transmission. On the other hand, the fully decentralized schemes often focus on different types of frequency reuse schemes with smaller amount of necessary feedback. Here, it is often overseen that in a practical deployment, the backhaul link quality is the bottleneck of the two-hop transmission, and the backhaul link is often modelled way too optimistically. Moreover, it is necessary to allocate radio resources to single hop mobile stations as well, which further limits the possible data rates of the relay-attached users. The research presented in this Thesis aims to improve the backhaul link quality in relay-assisted cellular networks under full consideration of practical constraints. In order to minimize the required channel feedback overhead this work proposes a hybrid radio resource management scheme consisting of three adapted procedures. The hybrid radio resource management scheme includes an adapted decentralized cell selection metric which improves the possibility to gain from the relays in the system for each user. A macro cell-centralized synchronous procedure is proposed, which is responsible to allocate the radio resources in each transmission time interval. Furthermore, an asynchronous network-centralized subband power allocation scheme with very limited feedback is proposed to maximize the wireless backhaul link quality with no losses for single-hop Mobile Station (MS)s. Comprehensive system level simulation results show stable fairness and improved throughput of the proposed hybrid radio resource management scheme. In addition possible energy savings for the shared channel are presented

Performance analysis of 4G wireless networks using system level simulator

Doutoramento em Engenharia ElectrotécnicaIn the last decade, mobile wireless communications have witnessed an explosive growth in the user’s penetration rate and their widespread deployment around the globe. In particular, a research topic of particular relevance in telecommunications nowadays is related to the design and implementation of mobile communication systems of 4th generation (4G). 4G networks will be characterized by the support of multiple radio access technologies in a core network fully compliant with the Internet Protocol (all IP paradigms). Such networks will sustain the stringent quality of service (QoS) requirements and the expected high data rates from the type of multimedia applications (i.e. YouTube and Skype) to be available in the near future. Therefore, 4G wireless communications system will be of paramount importance on the development of the information society in the near future. As 4G wireless services will continue to increase, this will put more and more pressure on the spectrum availability. There is a worldwide recognition that methods of spectrum managements have reached their limit and are no longer optimal, therefore new paradigms must be sought. Studies show that most of the assigned spectrum is under-utilized, thus the problem in most cases is inefficient spectrum management rather spectrum shortage. There are currently trends towards a more liberalized approach of spectrum management, which are tightly linked to what is commonly termed as Cognitive Radio (CR). Furthermore, conventional deployment of 4G wireless systems (one BS in cell and mobile deploy around it) are known to have problems in providing fairness (users closer to the BS are more benefited relatively to the cell edge users) and in covering some zones affected by shadowing, therefore the use of relays has been proposed as a solution. To evaluate and analyse the performances of 4G wireless systems software tools are normally used. Software tools have become more and more mature in recent years and their need to provide a high level evaluation of proposed algorithms and protocols is now more important. The system level simulation (SLS) tools provide a fundamental and flexible way to test all the envisioned algorithms and protocols under realistic conditions, without the need to deal with the problems of live networks or reduced scope prototypes. Furthermore, the tools allow network designers a rapid collection of a wide range of performance metrics that are useful for the analysis and optimization of different algorithms. This dissertation proposes the design and implementation of conventional system level simulator (SLS), which afterwards enhances for the 4G wireless technologies namely cognitive Radios (IEEE802.22) and Relays (IEEE802.16j). SLS is then used for the analysis of proposed algorithms and protocols.FC