SoundCompass: a distributed MEMS microphone array-based sensor for sound source localization

Sound source localization is a well-researched subject with applications ranging from localizing sniper fire in urban battlefields to cataloging wildlife in rural areas. One critical application is the localization of noise pollution sources in urban environments, due to an increasing body of evidence linking noise pollution to adverse effects on human health. Current noise mapping techniques often fail to accurately identify noise pollution sources, because they rely on the interpolation of a limited number of scattered sound sensors. Aiming to produce accurate noise pollution maps, we developed the SoundCompass, a low-cost sound sensor capable of measuring local noise levels and sound field directionality. Our first prototype is composed of a sensor array of 52 Microelectromechanical systems (MEMS) microphones, an inertial measuring unit and a low-power field-programmable gate array (FPGA). This article presents the SoundCompass's hardware and firmware design together with a data fusion technique that exploits the sensing capabilities of the SoundCompass in a wireless sensor network to localize noise pollution sources. Live tests produced a sound source localization accuracy of a few centimeters in a 25-m2 anechoic chamber, while simulation results accurately located up to five broadband sound sources in a 10,000-m2 open field

Sound Source Separation

This is the author's accepted pre-print of the article, first published as G. Evangelista, S. Marchand, M. D. Plumbley and E. Vincent. Sound source separation. In U. Zölzer (ed.), DAFX: Digital Audio Effects, 2nd edition, Chapter 14, pp. 551-588. John Wiley & Sons, March 2011. ISBN 9781119991298. DOI: 10.1002/9781119991298.ch14file: Proof:e\EvangelistaMarchandPlumbleyV11-sound.pdf:PDF owner: markp timestamp: 2011.04.26file: Proof:e\EvangelistaMarchandPlumbleyV11-sound.pdf:PDF owner: markp timestamp: 2011.04.2

An adaptive stereo basis method for convolutive blind audio source separation

NOTICE: this is the author’s version of a work that was accepted for publication in Neurocomputing. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in PUBLICATION, [71, 10-12, June 2008] DOI:neucom.2007.08.02

Independent Component Analysis Enhancements for Source Separation in Immersive Audio Environments

In immersive audio environments with distributed microphones, Independent Component Analysis (ICA) can be applied to uncover signals from a mixture of other signals and noise, such as in a cocktail party recording. ICA algorithms have been developed for instantaneous source mixtures and convolutional source mixtures. While ICA for instantaneous mixtures works when no delays exist between the signals in each mixture, distributed microphone recordings typically result various delays of the signals over the recorded channels. The convolutive ICA algorithm should account for delays; however, it requires many parameters to be set and often has stability issues. This thesis introduces the Channel Aligned FastICA (CAICA), which requires knowledge of the source distance to each microphone, but does not require knowledge of noise sources. Furthermore, the CAICA is combined with Time Frequency Masking (TFM), yielding even better SOI extraction even in low SNR environments. Simulations were conducted for ranking experiments tested the performance of three algorithms: Weighted Beamforming (WB), CAICA, CAICA with TFM. The Closest Microphone (CM) recording is used as a reference for all three. Statistical analyses on the results demonstrated superior performance for the CAICA with TFM. The algorithms were applied to experimental recordings to support the conclusions of the simulations. These techniques can be deployed in mobile platforms, used in surveillance for capturing human speech and potentially adapted to biomedical fields

Geometrical interpretation of the PCA subspace method for overdetermined blind source separation

In this paper, we discuss approaches for blind source separation where we can use more sensors than the number of sources for a better performance. The discussion focuses mainly on reducing the dimension of mixed signals before applying independent component analysis. We compare two previously proposed methods. The first is based on principal component analysis, where noise reduction is achieved. The second is based on geometric considerations and selects a subset of sensors according to the fact that a low frequency prefers a wide spacing and a high frequency prefers a narrow spacing. We found that the PCA-based method behaves similarly to the geometry-based method for low frequencies in the way that it emphasizes the outer sensors and yields superior results for high frequencies. Thes

Performance analysis for lateral-line-inspired sensor arrays

Submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at the Massachusetts Institute of Technology and the Woods Hole Oceanographic Institution June 2011The lateral line is a critical component of the fish sensory system, found to affect numerous aspects of behavior including maneuvering in complex fluid environments, schooling, prey tracking, and environment mapping. This sensory organ has no analog in modern ocean vehicles, despite its utility and ubiquity in nature, and could fill the gap left by sonar and vision systems in turbid cluttered environments. Yet, while the biological sensory system suggests the broad possibilities associated with such a sensor array, nearly nothing is known of the input processing and what information is available via the real lateral line. This thesis demonstrates and characterizes the ability of lateral-line-inspired linear pressure sensor arrays to perform two sensory tasks of relevance to biological and man-made underwater navigation systems, namely shape identification and vortex tracking. The ability of pressure sensor arrays to emulate the ”touch at a distance” feature of the lateral line, corresponding to the latter’s capability of identifying the shape of objects remotely, is examined with respect to moving cylinders of different cross sections. Using the pressure distribution on a small linear array, the position and size of a cylinder is tracked at various distances. The classification of cylinder shape is considered separately, using a large database of trials to identify two classification approaches: One based on differences in the mean flow, and one trained on a subset which utilizes information from the wake. The results indicate that it is in general possible to extract specific shape information from measurements on a linear pressure sensor array, and characterize the classes of shapes which are not distinguishable via this method. Identifying the vortices in a flow makes it possible to predict and optimize the performance of flapping foils, and to identify imminent stall in a control surface. Vortices in wakes also provide information about the object that generated the wake at distances much larger than the near-field pressure perturbations. Experimental studies in tracking a vortex pair and an individual vortex interacting with a flat plate demonstrate the ability to track vortices with a linear pressure sensor array from both small streamlined bodies and large flat bodies. Based on a theoretical analysis, the relationship between the necessary array parameters and the range of vortices of interest is established

Locating and extracting acoustic and neural signals

This dissertation presents innovate methodologies for locating, extracting, and separating multiple incoherent sound sources in three-dimensional (3D) space; and applications of the time reversal (TR) algorithm to pinpoint the hyper active neural activities inside the brain auditory structure that are correlated to the tinnitus pathology. Specifically, an acoustic modeling based method is developed for locating arbitrary and incoherent sound sources in 3D space in real time by using a minimal number of microphones, and the Point Source Separation (PSS) method is developed for extracting target signals from directly measured mixed signals. Combining these two approaches leads to a novel technology known as Blind Sources Localization and Separation (BSLS) that enables one to locate multiple incoherent sound signals in 3D space and separate original individual sources simultaneously, based on the directly measured mixed signals. These technologies have been validated through numerical simulations and experiments conducted in various non-ideal environments where there are non-negligible, unspecified sound reflections and reverberation as well as interferences from random background noise. Another innovation presented in this dissertation is concerned with applications of the TR algorithm to pinpoint the exact locations of hyper-active neurons in the brain auditory structure that are directly correlated to the tinnitus perception. Benchmark tests conducted on normal rats have confirmed the localization results provided by the TR algorithm. Results demonstrate that the spatial resolution of this source localization can be as high as the micrometer level. This high precision localization may lead to a paradigm shift in tinnitus diagnosis, which may in turn produce a more cost-effective treatment for tinnitus than any of the existing ones