Reducing Rad-Hard Memories for FPGA Configuration Storage on Space-bound Payloads

FPGA use in space-based applications is becoming more common. Radiation-hardened (rad-hard) memories are typically used to store configuration data for programming the FPGA and performing bitstream scrubbing to remove errors in the system that occur from single event upsets (SEUs). Since device densities for the latest FPGAs are growing at a faster rate than rad-hard memories, it is becoming more difficult to reliably store the FPGA configuration data without using a large number of memories. We present a method for cutting the use of rad-hard memories necessary to support the use of the latest FPGA technologies in space-based applications. This paper describes a solution to this memory problem which utilizes FPGA partial reconfiguration, with device self-scrubbing, and bitstream compression to create a minimally sized bootstrap design that has a memory footprint that is a fraction of the size of the original design. This bootstrap design is stored locally, and the remaining design elements can be reconfigured as necessary from a remote location. The resulting prototype design yields a compressed bitstream that at less than 2% the size of the bitstream for largest FPGA currently on the market

FPGA dynamic and partial reconfiguration : a survey of architectures, methods, and applications

Dynamic and partial reconfiguration are key differentiating capabilities of field programmable gate arrays (FPGAs). While they have been studied extensively in academic literature, they find limited use in deployed systems. We review FPGA reconfiguration, looking at architectures built for the purpose, and the properties of modern commercial architectures. We then investigate design flows, and identify the key challenges in making reconfigurable FPGA systems easier to design. Finally, we look at applications where reconfiguration has found use, as well as proposing new areas where this capability places FPGAs in a unique position for adoption

Configuration Sharing Optimized Placement and Routing

Reconfigurable systems have been shown to achieve very high computational performance. However, the overhead associated with reconfiguration of hardware remains a critical factor in overall system performance. This paper discusses the development and evaluation of a technique to minimize the delay associated with reconfiguration based upon optimized sharing of configuration bit streams between design contexts. This is achieved through modified placement and routing algorithms

Analysis of the reconfiguration latency and energy overheads for a Xilinx Virtex-5 FPGA

In this paper we have evaluated the overhead and the tradeoffs of a set of components usually included in a system with run-time partial reconfiguration implemented on a Xilinx Virtex-5. Our analysis shows the benefits of including a scratchpad memory inside the reconfiguration controller in order to improve the efficiency of the reconfiguration process. We have designed a simple controller for this scratchpad that includes support for prefetching and caching in order to further reduce both the energy and latency overhead

Optimal load shedding for microgrids with unlimited DGs

Recent years, increasing trends on electrical supply demand, make us to search for the new alternative in supplying the electrical power. A study in micro grid system with embedded Distribution Generations (DGs) to the system is rapidly increasing. Micro grid system basically is design either operate in islanding mode or interconnect with the main grid system. In any condition, the system must have reliable power supply and operating at low transmission power loss. During the emergency state such as outages of power due to electrical or mechanical faults in the system, it is important for the system to shed any load in order to maintain the system stability and security. In order to reduce the transmission loss, it is very important to calculate best size of the DGs as well as to find the best positions in locating the DG itself.. Analytical Hierarchy Process (AHP) has been applied to find and calculate the load shedding priorities based on decision alternatives which have been made. The main objective of this project is to optimize the load shedding in the micro grid system with unlimited DG’s by applied optimization technique Gravitational Search Algorithm (GSA). The technique is used to optimize the placement and sizing of DGs, as well as to optimal the load shedding. Several load shedding schemes have been proposed and studied in this project such as load shedding with fixed priority index, without priority index and with dynamic priority index. The proposed technique was tested on the IEEE 69 Test Bus Distribution system

A general framework for efficient FPGA implementation of matrix product

Original article can be found at: http://www.medjcn.com/ Copyright Softmotor LimitedHigh performance systems are required by the developers for fast processing of computationally intensive applications. Reconfigurable hardware devices in the form of Filed-Programmable Gate Arrays (FPGAs) have been proposed as viable system building blocks in the construction of high performance systems at an economical price. Given the importance and the use of matrix algorithms in scientific computing applications, they seem ideal candidates to harness and exploit the advantages offered by FPGAs. In this paper, a system for matrix algorithm cores generation is described. The system provides a catalog of efficient user-customizable cores, designed for FPGA implementation, ranging in three different matrix algorithm categories: (i) matrix operations, (ii) matrix transforms and (iii) matrix decomposition. The generated core can be either a general purpose or a specific application core. The methodology used in the design and implementation of two specific image processing application cores is presented. The first core is a fully pipelined matrix multiplier for colour space conversion based on distributed arithmetic principles while the second one is a parallel floating-point matrix multiplier designed for 3D affine transformations.Peer reviewe

Efficient reconfigurable architectures for 3D medical image compression

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Recently, the more widespread use of three-dimensional (3-D) imaging modalities, such as magnetic resonance imaging (MRI), computed tomography (CT), positron emission tomography (PET), and ultrasound (US) have generated a massive amount of volumetric data. These have provided an impetus to the development of other applications, in particular telemedicine and teleradiology. In these fields, medical image compression is important since both efficient storage and transmission of data through high-bandwidth digital communication lines are of crucial importance. Despite their advantages, most 3-D medical imaging algorithms are computationally intensive with matrix transformation as the most fundamental operation involved in the transform-based methods. Therefore, there is a real need for high-performance systems, whilst keeping architectures exible to allow for quick upgradeability with real-time applications. Moreover, in order to obtain efficient solutions for large medical volumes data, an efficient implementation of these operations is of significant importance. Reconfigurable hardware, in the form of field programmable gate arrays (FPGAs) has been proposed as viable system building block in the construction of high-performance systems at an economical price. Consequently, FPGAs seem an ideal candidate to harness and exploit their inherent advantages such as massive parallelism capabilities, multimillion gate counts, and special low-power packages. The key achievements of the work presented in this thesis are summarised as follows. Two architectures for 3-D Haar wavelet transform (HWT) have been proposed based on transpose-based computation and partial reconfiguration suitable for 3-D medical imaging applications. These applications require continuous hardware servicing, and as a result dynamic partial reconfiguration (DPR) has been introduced. Comparative study for both non-partial and partial reconfiguration implementation has shown that DPR offers many advantages and leads to a compelling solution for implementing computationally intensive applications such as 3-D medical image compression. Using DPR, several large systems are mapped to small hardware resources, and the area, power consumption as well as maximum frequency are optimised and improved. Moreover, an FPGA-based architecture of the finite Radon transform (FRAT)with three design strategies has been proposed: direct implementation of pseudo-code with a sequential or pipelined description, and block random access memory (BRAM)- based method. An analysis with various medical imaging modalities has been carried out. Results obtained for image de-noising implementation using FRAT exhibits promising results in reducing Gaussian white noise in medical images. In terms of hardware implementation, promising trade-offs on maximum frequency, throughput and area are also achieved. Furthermore, a novel hardware implementation of 3-D medical image compression system with context-based adaptive variable length coding (CAVLC) has been proposed. An evaluation of the 3-D integer transform (IT) and the discrete wavelet transform (DWT) with lifting scheme (LS) for transform blocks reveal that 3-D IT demonstrates better computational complexity than the 3-D DWT, whilst the 3-D DWT with LS exhibits a lossless compression that is significantly useful for medical image compression. Additionally, an architecture of CAVLC that is capable of compressing high-definition (HD) images in real-time without any buffer between the quantiser and the entropy coder is proposed. Through a judicious parallelisation, promising results have been obtained with limited resources. In summary, this research is tackling the issues of massive 3-D medical volumes data that requires compression as well as hardware implementation to accelerate the slowest operations in the system. Results obtained also reveal a significant achievement in terms of the architecture efficiency and applications performance.Ministry of Higher Education Malaysia (MOHE), Universiti Tun Hussein Onn Malaysia (UTHM) and the British Counci

A Framework for the Design and Analysis of High-Performance Applications on FPGAs using Partial Reconfiguration

The field-programmable gate array (FPGA) is a dynamically reconfigurable digital logic chip used to implement custom hardware. The large densities of modern FPGAs and the capability of the on-thely reconfiguration has made the FPGA a viable alternative to fixed logic hardware chips such as the ASIC. In high-performance computing, FPGAs are used as co-processors to speed up computationally intensive processes or as autonomous systems that realize a complete hardware application. However, due to the limited capacity of FPGA logic resources, denser FPGAs must be purchased if more logic resources are required to realize all the functions of a complex application. Alternatively, partial reconfiguration (PR) can be used to swap, on demand, idle components of the application with active components. This research uses PR to swap components to improve the performance of the application given the limited logic resources available with smaller but economical FPGAs. The swap is called ”resource sharing PR”. In a pipelined design of multiple hardware modules (pipeline stages), resource sharing PR is a technique that uses PR to improve the performance of pipeline bottlenecks. This is done by reconfiguring other pipeline stages, typically those that are idle waiting for data from a bottleneck, into an additional parallel bottleneck module. The target pipeline of this research is a two-stage “slow-toast” pipeline where the flow of data traversing the pipeline transitions from a relatively slow, bottleneck stage to a fast stage. A two stage pipeline that combines FPGA-based hardware implementations of well-known Bioinformatics search algorithms, the X! Tandem algorithm and the Smith-Waterman algorithm, is implemented for this research; the implemented pipeline demonstrates that characteristics of these algorithm. The experimental results show that, in a database of unknown peptide spectra, when matching spectra with 388 peaks or greater, performing resource sharing PR to instantiate a parallel X! Tandem module is worth the cost for PR. In addition, from timings gathered during experiments, a general formula was derived for determining the value of performing PR upon a fast module

A Multi-layer Fpga Framework Supporting Autonomous Runtime Partial Reconfiguration

Partial reconfiguration is a unique capability provided by several Field Programmable Gate Array (FPGA) vendors recently, which involves altering part of the programmed design within an SRAM-based FPGA at run-time. In this dissertation, a Multilayer Runtime Reconfiguration Architecture (MRRA) is developed, evaluated, and refined for Autonomous Runtime Partial Reconfiguration of FPGA devices. Under the proposed MRRA paradigm, FPGA configurations can be manipulated at runtime using on-chip resources. Operations are partitioned into Logic, Translation, and Reconfiguration layers along with a standardized set of Application Programming Interfaces (APIs). At each level, resource details are encapsulated and managed for efficiency and portability during operation. An MRRA mapping theory is developed to link the general logic function and area allocation information to the device related physical configuration level data by using mathematical data structure and physical constraints. In certain scenarios, configuration bit stream data can be read and modified directly for fast operations, relying on the use of similar logic functions and common interconnection resources for communication. A corresponding logic control flow is also developed to make the entire process autonomous. Several prototype MRRA systems are developed on a Xilinx Virtex II Pro platform. The Virtex II Pro on-chip PowerPC core and block RAM are employed to manage control operations while multiple physical interfaces establish and supplement autonomous reconfiguration capabilities. Area, speed and power optimization techniques are developed based on the developed Xilinx prototype. Evaluations and analysis of these prototype and techniques are performed on a number of benchmark and hashing algorithm case studies. The results indicate that based on a variety of test benches, up to 70% reduction in the resource utilization, up to 50% improvement in power consumption, and up to 10 times increase in run-time performance are achieved using the developed architecture and approaches compared with Xilinx baseline reconfiguration flow. Finally, a Genetic Algorithm (GA) for a FPGA fault tolerance case study is evaluated as a ultimate high-level application running on this architecture. It demonstrated that this is a hardware and software infrastructure that enables an FPGA to dynamically reconfigure itself efficiently under the control of a soft microprocessor core that is instantiated within the FPGA fabric. Such a system contributes to the observed benefits of intelligent control, fast reconfiguration, and low overhead