Adaptive OFDM Cooperative Systems

Cooperative communication is a promising technique for wireless communication systems where wireless nodes cooperate together in transmitting their information. Such communication transmission technique, which realizes the multiple antenna arrays in a distributed manner over multiple wireless nodes, succeeds in extending the network coverage, increasing throughput, improving both link reliability and spectral efficiency. Available channel state information at the transmitting nodes can be used to design adaptive transmission schemes for improving the overall system performance. Throughout our work, we adaptively change loaded power and/or bit to the Orthogonal Frequency Division Multiplexing (OFDM) symbol in order to minimize bit error rate or maximize the throughput. In the first part of this dissertation, we consider single-relay OFDM system with amplify-and-forward relaying. We propose three algorithms to minimize the bit error rate under total power constraint and fixed transmission rate. These algorithms are optimal power loading, optimal bit loading and optimal bit and power loading. Through Monte Carlo simulations we study the proposed system performance and discuss the effect of relay location and channel estimation. This study shows that the proposed algorithms result in exploiting the multi-path diversity and achieving extra coding gain. In the second part, we extend the problem to a multi-relay OFDM network but with decode-and-forward relaying. We propose an adaptive power loading algorithm to minimize the bit error rate under total power constraint based on two relay selection strategies. The proposed system leads to achieve both multi-path and cooperative spatial diversity using maximal-ratio combiner for the detection. In the last part, we consider also multi-relay network but with amplify and forward relaying. We optimize the bit loading coefficients to maximize the throughput under target bit error rate constraint. The proposed algorithm is considered more practical since it takes into consideration the channel estimation quality. The considered adaptive system has less complexity compared with other adaptive systems through reducing the feedback amount. Furthermore, the full network channel state information is needed only at the destination

Minimisation du TEB moyen d'un système OFDM precodé

International audienceLe problème de la minimisation du TEB (taux d'erreur binaire) moyen est étudié pour un système LP-OFDM (linear precoded orthogonal frequency division multiplexing). Les algorithmes d'allocation des ressources sont proposés pour minimiser le TEB moyen sous contrainte de débit cible et de densité spectrale de puissance. Les résultats sont présentés dans le contexte des courants porteurs en ligne (CPL) et comparés aux performances des algorithmes, plus classiques, de maximisation de la marge des systèmes OFDM et LP-OFDM. Il est montré que l'allocation proposée est plus performante surtout pour les faibles RSB (rapport signal sur bruit) tout en offrant une complexité réduite

MIMO designs for filter bank multicarrier and multiantenna systems based on OQAM

From the perspective of increasingly data rate requirements in mobile communications, it is deemed necessary to do further research so that the future goals can be reached. To that end, the radio-based communications are resorting to multicarrier modulations and spatial diversity. Until today, the orthogonal frequency division multiplexing (OFDM) modulation is regarded as the dominant technology. On one hand, the OFDM modulation is able to accommodate multiantenna configurations in a very straightforward manner. On the other hand, the poor stopband attenuation exhibited by the OFDM modulation, highlights that a definitely tight synchronization is required. In addition, the cyclic prefix (CP) has to be sufficiently long to avoid inter-block interference, which may substantially reduce the spectral efficiency. In order to overcome the OFDM drawbacks, the filter bank multicarrier modulation based on OQAM (FBMC/OQAM) is introduced. This modulation does not need any CP and benefits from pulse shaping techniques. This aspect becomes crucial in cognitive radio networks and communication systems where nodes are unlikely to be synchronized. In principle, the poor frequency confinement exhibited by OFDM should tip the balance towards FBMC/OQAM. However, the perfect reconstruction property of FBMC/OQAM systems does not hold in presence of multipath fading. This means that the FBMC/OQAM modulation is affected by inter-symbol and inter-carrier interference, unless the channel is equalized to some extent. This observation highlights that the FBMC/OQAM extension to MIMO architectures becomes a big challenge due to the need to cope with both modulation- and multiantenna-induced interference. The goal of this thesis is to study how the FBMC/OQAM modulation scheme can benefit from the degrees of freedom provided by the spatial dimension. In this regard, the first attempt to put the research on track is based on designing signal processing techniques at reception. In this case the emphasis is on single-input-multiple-output (SIMO) architectures. Next, the possibility of pre-equalizing the channel at transmission is investigated. It is considered that multiple antennas are placed at the transmit side giving rise to a multiple-input-single-output (MISO) configuration. In this scenario, the research is not only focused on counteracting the channel but also on distributing the power among subcarriers. Finally, the joint transmitter and receiver design in multiple-input-multiple-output (MIMO) communication systems is covered. From the theory developed in this thesis, it is possible to conclude that the techniques originally devised in the OFDM context can be easily adapted to FBMC/OQAM systems if the channel frequency response is flat within the subchannels. However, metrics such as the peak to average power ratio or the sensitivity to the carrier frequency offset constraint the number of subcarriers, so that the frequency selectivity may be appreciable at the subcarrier level. Then, the flat fading assumption is not satisfied and the specificities of FBMC/OQAM systems have to be considered. In this situation, the proposed techniques allow FBMC/OQAM to remain competitive with OFDM. In addition, for some multiantenna configurations and propagation conditions FBMC/OQAM turns out to be the best choice. The simulation-based results together with the theoretical analysis conducted in this thesis contribute to make progress towards the application of FBMC/OQAM to MIMO channels. The signal processing techniques that are described in this dissertation allow designers to exploit the potentials of FBMC/OQAM and MIMO to improve the link reliability as well as the spectral efficiency

Resource allocation with adaptive spread spectrum OFDM using 2D spreading for power line communications

13 pagesInternational audienceBit-loading techniques based on OFDM are frequently used over wire-line channels. In the power-line context, channel state information can reasonably be obtained at both transmitter and receiver sides, and adaptive loading can advantageously be carried out. In this paper, we propose to apply loading principles to an SS-OFDM waveform which is a multi-carrier system using 2D spreading in the time and frequency domains. The presented algorithm handles the subcarriers, spreading codes, bits and energies assignment in order to maximize the data rate and the range of the communication system. The optimization is realized at a target symbol error rate and under spectral mask constraint as usually imposed. The analytical study shows that the merging principle realized by the spreading code improves the rate and the range of the DMT system in single and multi-user contexts. Simulations have been run over measured PLC channel responses and highlight that the proposed system is all the more interesting than the received SNR is low