10 research outputs found

    Bit error rate calculation for DS-CDMA systems with WDS in the presence of Rayleigh fading and power-control error

    No full text
    This paper reports work in which modified expressions for the bit error rate (BER) calculation of DS-CDMA systems with weighted despreading sequences (WDS) in the presence of Rayleigh fading and power-control error are proposed, The focus of the modified expressions is based on a simple equality which was proposed in the open literature. The major benefit from using the proposed expressions which are obtained for both coherent and noncoherent receptions is that they require less definition about the spreading sequences for the BER calculation.This paper reports work in which modified expressions for the bit error rate (BER) calculation of DS-CDMA systems with weighted despreading sequences (WDS) in the presence of Rayleigh fading and power-control error are proposed. The focus of the modified expressions is based on a simple equality which was proposed in the open literature. The major benefit from using the proposed expressions which are obtained for both coherent and noncoherent receptions is that they require less definition about the spreading sequences for the BER calculation

    Improving the Performance of Wireless LANs

    Get PDF
    This book quantifies the key factors of WLAN performance and describes methods for improvement. It provides theoretical background and empirical results for the optimum planning and deployment of indoor WLAN systems, explaining the fundamentals while supplying guidelines for design, modeling, and performance evaluation. It discusses environmental effects on WLAN systems, protocol redesign for routing and MAC, and traffic distribution; examines emerging and future network technologies; and includes radio propagation and site measurements, simulations for various network design scenarios, numerous illustrations, practical examples, and learning aids

    Bit Error Rate Calculation for DS-CDMA Systems with WDS in the Presence of Rayleigh Fading and Power-Control Error (published in LNCS 3746)

    No full text
    This paper reports work in which modified expressions for the bit er-ror rate (BER) calculation of DS-CDMA systems with weighted despreading sequences (WDS) in the presence of Rayleigh fading and power-control error are proposed. The focus of the modified expressions is based on a simple equal-ity which was proposed in the open literature. The major benefit from using the proposed expressions which are obtained for both coherent and noncoherent re-ceptions is that they require less definition about the spreading sequences for the BER calculation

    Design of interface selection protocols for multi-homed wireless networks

    Get PDF
    The IEEE 802.11/802.16 standards conformant wireless communication stations have multi-homing transmission capability. To achieve greater communication efficiency, multi-homing capable stations use handover mechanism to select appropriate transmission channel according to variations in the channel quality. This thesis presents three internal-linked handover schemes, (1) Interface Selection Protocol (ISP), belonging to Wireless Local Area Network (WLAN)- Worldwide Interoperability for Microwave Access (WiMAX) environment (2) Fast Channel Scanning (FCS) and (3) Traffic Manager (TM), (2) and (3) belonging to WiMAX Environment. The proposed schemes in this thesis use a novel mechanism of providing a reliable communication route. This solution is based on a cross-layer communication framework, where the interface selection module uses various network related parameters from Medium Access Control (MAC) sub-layer/Physical Layer (PHY) across the protocol suite for decision making at the Network layer. The proposed solutions are highly responsive when compared with existing multi-homed schemes; responsiveness is one of the key factors in the design of such protocols. Selected route under these schemes is based on the most up to date link-layer information. Therefore, such a route is not only reliable in terms of route optimization but it also fulfils the application demands in terms of throughput and delay. Design of ISP protocol use probing frames during the route discovery process. The 802.11 mandates the use of different rates for data transmission frames. The ISP-metric can be incorporated into various routing aspects and its applicability is determined by the possibility of provision of MAC dependent parameters that are used to determine the best path metric values. In many cases, higher device density, interference and mobility cause variable medium access delays. It causes creation of ‘unreachable zones’, where destination is marked as unreachable. However, by use of the best path metric, the destination has been made reachable, anytime and anywhere, because of the intelligent use of the probing frames and interface selection algorithm implemented. The IEEE 802.16e introduces several MAC level queues for different access categories, maintaining service requirement within these queues; which imply that frames from a higher priority queue, i.e. video frames, are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result, these factors are not considered which result in channel performance degradation. To meet such challenges, the thesis presents FCS and TM schemes for WiMAX. For FCS, Its solution is to improve the mobile WiMAX handover and address the scanning latency. Since minimum scanning time is the most important issue in the handover process. This handover scheme aims to utilize the channel efficiently and apply such a procedure to reduce the time it takes to scan the neighboring access stations. TM uses MAC and physical layer (PHY) specific information in the interface metric and maintains a separate path to destination by applying an alternative interface operation. Simulation tests and comparisons with existing multi-homed protocols and handover schemes demonstrate the effectiveness of incorporating the medium dependent parameters. Moreover, show that suggested schemes, have shown better performance in terms of end-to-end delay and throughput, with efficiency up to 40% in specific test scenarios.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

    Energy Efficiency

    Get PDF
    This book is one of the most comprehensive and up-to-date books written on Energy Efficiency. The readers will learn about different technologies for energy efficiency policies and programs to reduce the amount of energy. The book provides some studies and specific sets of policies and programs that are implemented in order to maximize the potential for energy efficiency improvement. It contains unique insights from scientists with academic and industrial expertise in the field of energy efficiency collected in this multi-disciplinary forum

    Rake, Peel, Sketch:The Signal Processing Pipeline Revisited

    Get PDF
    The prototypical signal processing pipeline can be divided into four blocks. Representation of the signal in a basis suitable for processing. Enhancement of the meaningful part of the signal and noise reduction. Estimation of important statistical properties of the signal. Adaptive processing to track and adapt to changes in the signal statistics. This thesis revisits each of these blocks and proposes new algorithms, borrowing ideas from information theory, theoretical computer science, or communications. First, we revisit the Walsh-Hadamard transform (WHT) for the case of a signal sparse in the transformed domain, namely that has only K †N non-zero coefficients. We show that an efficient algorithm exists that can compute these coefficients in O(K log2(K) log2(N/K)) and using only O(K log2(N/K)) samples. This algorithm relies on a fast hashing procedure that computes small linear combinations of transformed domain coefficients. A bipartite graph is formed with linear combinations on one side, and non-zero coefficients on the other. A peeling decoder is then used to recover the non-zero coefficients one by one. A detailed analysis of the algorithm based on error correcting codes over the binary erasure channel is given. The second chapter is about beamforming. Inspired by the rake receiver from wireless communications, we recognize that echoes in a room are an important source of extra signal diversity. We extend several classic beamforming algorithms to take advantage of echoes and also propose new optimal formulations. We explore formulations both in time and frequency domains. We show theoretically and in numerical simulations that the signal-to-interference-and-noise ratio increases proportionally to the number of echoes used. Finally, beyond objective measures, we show that echoes also directly improve speech intelligibility as measured by the perceptual evaluation of speech quality (PESQ) metric. Next, we attack the problem of direction of arrival of acoustic sources, to which we apply a robust finite rate of innovation reconstruction framework. FRIDA â the resulting algorithm â exploits wideband information coherently, works at very low signal-to-noise ratio, and can resolve very close sources. The algorithm can use either raw microphone signals or their cross- correlations. While the former lets us work with correlated sources, the latter creates a quadratic number of measurements that allows to locate many sources with few microphones. Thorough experiments on simulated and recorded data shows that FRIDA compares favorably with the state-of-the-art. We continue by revisiting the classic recursive least squares (RLS) adaptive filter with ideas borrowed from recent results on sketching least squares problems. The exact update of RLS is replaced by a few steps of conjugate gradient descent. We propose then two different precondi- tioners, obtained by sketching the data, to accelerate the convergence of the gradient descent. Experiments on artificial as well as natural signals show that the proposed algorithm has a performance very close to that of RLS at a lower computational burden. The fifth and final chapter is dedicated to the software and hardware tools developed for this thesis. We describe the pyroomacoustics Python package that contains routines for the evaluation of audio processing algorithms and reference implementations of popular algorithms. We then give an overview of the microphone arrays developed
    corecore