A Novel Stealthy Target Detection Based on Stratospheric Balloon-borne Positional Instability due to Random Wind

A novel detection for stealthy target model F-117A with a higher aspect vision is introduced by using Stratospheric Balloon-borne Bistatic system. The potential problem of proposed scheme is platform instability impacted on the balloon by external wind force. The flight control system is studied in detail under typical random process, which is defined by Dryden turbulence spectrum. To accurately detect the stealthy target model, a real Radar Cross Section (RCS) based on physical optics (PO) formulation is applied. The sensitivity of the proposed scheme has been improved due to increasing PO – scattering field of stealthy model with higher aspect angle comparing to the conventional ground -based system. Simulations demonstrate that the proposed scheme gives much higher location accuracy and reduces location errors

Numerical Analysis of Microwave Scattering from Layered Sea Ice Based on the Finite Element Method

Source at https://doi.org/10.3390/rs10091332.A two-dimensional scattering model based on the Finite Element Method (FEM) is built for simulating the microwave scattering of sea ice, which is a layered medium. The scattering problem solved by the FEM is formulated following a total- and scattered-field decomposition strategy. The model set-up is first validated with good agreements by comparing the results of the FEM with those of the small perturbation method and the method of moment. Subsequently, the model is applied to two cases of layered sea ice to study the effect of subsurface scattering. The first case is newly formed sea ice which has scattering from both air–ice and ice–water interfaces. It is found that the backscattering has a strong oscillation with the variation of sea ice thickness. The found oscillation effects can increase the difficulty of retrieving the thickness of newly formed sea ice from the backscattering data. The second case is first-year sea ice with C-shaped salinity profiles. The scattering model accounts for the variations in the salinity profile by approximating the profile as consisting of a number of homogeneous layers. It is found that the salinity profile variations have very little influence on the backscattering for both C- and L-bands. The results show that the sea ice can be considered to be homogeneous with a constant salinity value in modelling the backscattering and it is difficult to sense the salinity profile of sea ice from the backscattering data, because the backscattering is insensitive to the salinity profile

Multistatic acoustic characterization of seabed targets

Author Posting. © Acoustical Society of America, 2017. This article is posted here by permission of Acoustical Society of America for personal use, not for redistribution. The definitive version was published in Journal of the Acoustical Society of America 142 (2017): 1587–1596, doi:10.1121/1.5002887.One application for autonomous underwater vehicles (AUVs) is detecting and classifying hazardous objects on the seabed. An acoustic approach to this problem has been studied in which an acoustic source insonifies seabed target while receiving AUVs with passive sensing payloads discriminate targets based on features of the three dimensional scattered fields. The OASES-SCATT simulator was used to study how scattering data collected by mobile receivers around targets insonified by mobile sources might be used for sphere and cylinder target characterization in terms of shape, composition, and size. The impact of target geometry on these multistatic scattering fields is explored, and a discrimination approach developed in which the source and receiver circle the target with the same radial speed. The frequency components of the multistatic scattering data at different bistatic angles are used to form models for target characteristics. Data are then classified using these models. Classification accuracies were greater than 98% for shape and composition. Regression for target volume showed potential, with 90% chance of errors less than 15%. The significance of this approach is to make classification using low-cost vehicles plausible from scattering amplitudes and the relative angles between the target, source, and receiver vehicles.This work was supported by Battelle

Bistatic radar signature of buried landmines

With the proliferation of low-intensity conflict, landmines have proven to be one of the weapons of choice for both government and guerrilla forces around the world. Recent improvements to mine technology pose increasingly significant problems for demining operations, requiring the constant upgrading of countermine technologies. Ground Penetrating Radar (GPR) is one of the most exhaustively researched topics in the detection of buried mines as it can be used to detect non-metallic and plastic mines. However, identification and recognition are still unsolved problems, due to the scattering similarity between mines and clutter objects. This study provides an experimental evaluation of the improvements that a bistatic approach could yield and what can be gained from investigating the angular dependencies of the landmine radar signature

Fast Numerical Algorithms for 3-D Scattering from PEC and Dielectric Random Rough Surfaces in Microwave Remote Sensing

abstract: We present fast and robust numerical algorithms for 3-D scattering from perfectly electrical conducting (PEC) and dielectric random rough surfaces in microwave remote sensing. The Coifman wavelets or Coiflets are employed to implement Galerkin’s procedure in the method of moments (MoM). Due to the high-precision one-point quadrature, the Coiflets yield fast evaluations of the most off-diagonal entries, reducing the matrix fill effort from O(N^2) to O(N). The orthogonality and Riesz basis of the Coiflets generate well conditioned impedance matrix, with rapid convergence for the conjugate gradient solver. The resulting impedance matrix is further sparsified by the matrix-formed standard fast wavelet transform (SFWT). By properly selecting multiresolution levels of the total transformation matrix, the solution precision can be enhanced while matrix sparsity and memory consumption have not been noticeably sacrificed. The unified fast scattering algorithm for dielectric random rough surfaces can asymptotically reduce to the PEC case when the loss tangent grows extremely large. Numerical results demonstrate that the reduced PEC model does not suffer from ill-posed problems. Compared with previous publications and laboratory measurements, good agreement is observed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Three-Dimensional Electromagnetic Scattering from Layered Media with Rough Interfaces for Subsurface Radar Remote Sensing

The objective of this dissertation is to develop forward scattering models for active microwave remote sensing of natural features represented by layered media with rough interfaces. In particular, soil profiles are considered, for which a model of electromagnetic scattering from multilayer rough surfaces with/without buried random media is constructed. Starting from a single rough surface, radar scattering is modeled using the stabilized extended boundary condition method (SEBCM). This method solves the long-standing instability issue of the classical EBCM, and gives three-dimensional full wave solutions over large ranges of surface roughnesses with higher computational e±ciency than pure numerical solutions, e.g., method of moments (MoM). Based on this single surface solution, multilayer rough surface scattering is modeled using the scattering matrix approach and the model is used for a comprehensive sensitivity analysis of the total ground scattering as a function of layer separation, subsurface statistics, and sublayer dielectric properties. The buried inhomogeneities such as rocks and vegetation roots are considered for the first time in the forward scattering model. Radar scattering from buried random media is modeled by the aggregate transition matrix using either the recursive transition matrix approach for spherical or short-length cylindrical scatterers, or the generalized iterative extended boundary condition method we developed for long cylinders or root-like cylindrical clusters. These approaches take the field interactions among scatterers into account with high computational efficiency. The aggregate transition matrix is transformed to a scattering matrix for the full solution to the layered-medium problem. This step is based on the near-to-far field transformation of the numerical plane wave expansion of the spherical harmonics and the multipole expansion of plane waves. This transformation consolidates volume scattering from the buried random medium with the scattering from layered structure in general. Combined with scattering from multilayer rough surfaces, scattering contributions from subsurfaces and vegetation roots can be then simulated. Solutions of both the rough surface scattering and random media scattering are validated numerically, experimentally, or both. The experimental validations have been carried out using a laboratory-based transmit-receive system for scattering from random media and a new bistatic tower-mounted radar system for field-based surface scattering measurements.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91459/1/xduan_1.pd

An Efficient Hybrid Method for 3D Scattering from Inhomogeneous Object Buried beneath a Dielectric Randomly Rough Surface

An efficient iterative analytical-numerical method is proposed for three-dimensional (3D) electromagnetic scattering from an inhomogeneous object buried beneath a two-dimensional (2D) randomly dielectric rough surface. In the hybrid method, the electric and magnetic currents on the dielectric rough surface are obtained by current-based Kirchhoff approximation (KA), while the scattering from the inhomogeneous object is rigorously studied by finite element method (FEM) combined with the boundary integral method (BIM). The multiple interactions between the buried object and rough surface are taken into account by updating the electric and magnetic current densities on them. Several numerical simulations are considered to demonstrate the algorithm’s ability to deal with the scattering from the inhomogeneous target buried beneath a dielectric rough surface, and the effectiveness of our proposed method is also illustrated