Stable locomotion of humanoid robots based on mass concentrated model

El estudio de la locomoción de robots humanoides es actualmente un área muy activa, en el campo de la robótica. Partiendo del principio que el hombre esta construyendo robots para trabajar juntos cooperando en ambientes humanos. La estabilidad durante la caminata es un factor crítico que prevee la caída del robot, la cual puede causar deterioros al mismo y a las personas en su entorno. De esta manera, el presente trabajo pretende resolver una parte del problema de la locomoción bípeda, esto es los métodos empleados para “La generación del paso” (“Gait generation”) y asi obtener la caminata estable. Para obtener una marcha estable se utilizan modelos de masa concentrada. De esta manera el modelo del “pendulo invertido simple” y el modelo del “carro sobre la mesa” se han utilizado para conseguir la marcha estable de robots humanoides. En el modelo del pendulo invertido, la masa el pendulo conduce el movimiento del centro de gravedad (CDG) del robot humanoide durante la marcha. Se detallara que el CDG se mueve como una bola libre sobre un plano bajo las leyes del pendulo en el campo de gravedad. Mientras que en el modelo del “carro sobre la mesa”, el carro conduce el movimiento del CDG durante la marcha. En este caso, el movimiento del carro es tratado como un sistema servocontrolado, y el movimiento del CDG es obtenido con los actuales y futuros estados de referencia del Zero Moment Point (ZMP). El método para generar el paso propuesto esta compuesto de varias capas como son Movimiento global, movimiento local, generación de patrones de movimiento, cinemática inversa y dinámica inversa y finalmente una corrección off-line. Donde la entrada en este método es la meta global (es decir la configuración final del robot, en el entorno de marcha) y las salidas son los patrones de movimiento de las articulaciones junto con el patrón de referencia del ZMP. Por otro lado, se ha propuesto el método para generar el “Paso acíclico”. Este método abarca el movimiento del paso dinámico incluyendo todo el cuerpo del robot humanoide, desde desde cuaquier postura genérica estáticamente estable hasta otra; donde las entradas son los estados inicial y final del robot (esto es los ángulos iniciales y finales de las articulaciones) y las salidas son las trayectorias de referencia de cada articulación y del ZMP. Se han obtenido resultados satisfactorios en las simulaciones y en el robot humanoide real Rh-1 desarrollado en el Robotics lab de la Universidad Carlos III de Madrid. De igual manera el movimiento innovador llamado “Paso acíclico” se ha implemenado exitosamente en el robot humanoide HRP-2 (desarrollado por el AIST e Industrias Kawada Inc., Japon). Finalmente los resultados, contribuciones y trabajos futuros se expondran y discutirán. _______________________________________________The study of humanoid robot locomotion is currently a very active area in robotics, since humans build robots to work their environments in common cooperation and in harmony. Stability during walking motion is a critical fact in preventing the robot from falling down and causing the human or itself damages. This work tries to solve a part of the locomotion problem, which is, the “Gait Generation” methods used to obtain stable walking. Mass concentrated models are used to obtain stable walking motion. Thus the inverted pendulum model and the cart-table model are used to obtain stable walking motion in humanoid robots. In the inverted pendulum model, the mass of the pendulum drives the center of gravity (COG) motion of the humanoid robot while it is walking. It will be detailed that the COG moves like a free ball on a plane under the laws of the pendulum in the field of gravity. While in the cart-table model, the cart drives the COG motion during walking motion. In this case, the cart motion is treated as a servo control system, obtaining its motion from future reference states of the ZMP. The gait generation method proposed has many layers like Global motion, local motion, motion patterns generation, inverse kinematics and inverse dynamics and finally off-line correction. When the input in the gait generation method is the global goal (that is the final configuration of the robot in walking environment), and the output is the joint patterns and ZMP reference patterns. Otherwise, the “Acyclic gait” method is proposed. This method deals with the whole body humanoid robot dynamic step motion from any generic posture to another one when the input is the initial and goal robot states (that is the initial and goal joint angles) and the output is the joint and ZMP reference patterns. Successful simulation and actual results have been obtained with the Rh- 1 humanoid robot developed in the Robotics lab (Universidad Carlos III de Madrid, Spain) and the innovative motion called “Acyclic gait” implemented in the HRP-2 humanoid robot platform (developed by the AIST and Kawada Industries Inc., Japan). Furthermore, the results, contributions and future works will be discussed

Humanoid robot simulator: a realistic dynamics approach

This paper describes a humanoid robot simulator with realistic dynamics. As simulation is a powerful tool for speeding up the control software development, the suggested accurate simulator allows to accomplish this goal. The simulator, based on the Open Dynamics Engine and GLScene graphics library, provides instant visual feedback and allows the user to test any control strategy without damaging the real robot in the early stages of the development. The proposed simulator also captures some characteristics of the environment that are important and allows to test controllers without access to the real hardware. Experimental results are shown that validate this approach

Realistic behaviour simulation of a humanoid robot

This paper describes a humanoid robot simulator with realistic dynamics. As simulation is a powerful tool for speeding up the control software development, the proposed accurate simulator allows to fulfil this goal. The simulator is based on the Open Dynamics Engine and GLScene graphics library, providing instant visual feedback. User is able to test any control strategy without bringing damage to the real robot in the early stages of the development. The proposed simulator also captures some characteristics of the environment that are important and allows to test controllers without access to the real hardware. Experimental and simulator results are presented in order to validate the proposed simulator

Planning and Control Strategies for Motion and Interaction of the Humanoid Robot COMAN+

Despite the majority of robotic platforms are still confined in controlled environments such as factories, thanks to the ever-increasing level of autonomy and the progress on human-robot interaction, robots are starting to be employed for different operations, expanding their focus from uniquely industrial to more diversified scenarios. Humanoid research seeks to obtain the versatility and dexterity of robots capable of mimicking human motion in any environment. With the aim of operating side-to-side with humans, they should be able to carry out complex tasks without posing a threat during operations. In this regard, locomotion, physical interaction with the environment and safety are three essential skills to develop for a biped. Concerning the higher behavioural level of a humanoid, this thesis addresses both ad-hoc movements generated for specific physical interaction tasks and cyclic movements for locomotion. While belonging to the same category and sharing some of the theoretical obstacles, these actions require different approaches: a general high-level task is composed of specific movements that depend on the environment and the nature of the task itself, while regular locomotion involves the generation of periodic trajectories of the limbs. Separate planning and control architectures targeting these aspects of biped motion are designed and developed both from a theoretical and a practical standpoint, demonstrating their efficacy on the new humanoid robot COMAN+, built at Istituto Italiano di Tecnologia. The problem of interaction has been tackled by mimicking the intrinsic elasticity of human muscles, integrating active compliant controllers. However, while state-of-the-art robots may be endowed with compliant architectures, not many can withstand potential system failures that could compromise the safety of a human interacting with the robot. This thesis proposes an implementation of such low-level controller that guarantees a fail-safe behaviour, removing the threat that a humanoid robot could pose if a system failure occurred