42 research outputs found

    Trajectory-Aided Maximum-Likelihood Algorithm for Channel Parameter Estimation in Ultra-Wideband Large-Scale Arrays

    Get PDF

    Wireless Propagation Multipaths using Spectral Clustering and Three-Constraint Affinity Matrix Spectral Clustering

    Get PDF
    This study focused on spectral clustering (SC) and three-constraint affinity matrix spectral clustering (3CAM-SC) to determine the number of clusters and the membership of the clusters of the COST 2100 channel model (C2CM) multipath dataset simultaneously. Various multipath clustering approaches solve only the number of clusters without taking into consideration the membership of clusters. The problem of giving only the number of clusters is that there is no assurance that the membership of the multipath clusters is accurate even though the number of clusters is correct. SC and 3CAM-SC aimed to solve this problem by determining the membership of the clusters. The cluster and the cluster count were then computed through the cluster-wise Jaccard index of the membership of the multipaths to their clusters. The multipaths generated by C2CM were transformed using the directional cosine transform (DCT) and the whitening transform (WT). The transformed dataset was clustered using SC and 3CAM-SC. The clustering performance was validated using the Jaccard index by comparing the reference multipath dataset with the calculated multipath clusters. The results show that the effectiveness of SC is similar to the state-of-the-art clustering approaches. However, 3CAM-SC outperforms SC in all channel scenarios. SC can be used in indoor scenarios based on accuracy, while 3CAM-SC is applicable in indoor and semi-urban scenarios. Thus, the clustering approaches can be applied as alternative clustering techniques in the field of channel modeling

    Dynamic mmWave Channel Emulation in a Cost-Effective MPAC with Dominant-Cluster Concept

    Get PDF
    Millimeter-Wave (mmWave) massive multiple-input multiple-output (MIMO) has been considered as a key enabler for the fifth-generation (5G) communications. It is essential to design and test mmWave 5G devices under various realisticscenarios since the radio propagation channels pose intrinsic limitations on the performance. This requires emulating realistic dynamic mmWave channels in a reproducible manner in laboratories, which is the goal of this paper. In this contribution, we first illustrate the dominant-cluster(s) concept, where thenon-dominant clusters in the mmWave channels are pruned, for mmWave 5G devices applying massive MIMO beamforming. This demonstrates the importance and necessity to accurately emulate the mmWave channels at a cluster level rather than the composite-channel level. Thus, an over-the-air (OTA) emulationstrategy for dynamic mmWave channels is proposed based on the concept of dominant-cluster(s) in a sectored multiprobe anechoic chamber (SMPAC). The key design parameters including the probe number and the angular spacing of probes are investigated through comprehensive simulations. A cost-effective switch circuit is also designed for this purpose and validated in the simulation. Furthermore, a dynamic mmWave channel measured in an indoor scenario at 28-30 GHz is presented, where the proposed emulation strategy is also validated by reproducing the measured reality

    Modelling and characterisation of antennas and propagation for body-centric wireless communication

    Get PDF
    PhDBody-Centric Wireless Communication (BCWC) is a central point in the development of fourth generation mobile communications. The continuous miniaturisation of sensors, in addition to the advancement in wearable electronics, embedded software, digital signal processing and biomedical technologies, have led to a new concept of usercentric networks, where devices can be carried in the user’s pockets, attached to the user’s body or even implanted. Body-centric wireless networks take their place within the personal area networks, body area networks and body sensor networks which are all emerging technologies that have a broad range of applications such as healthcare and personal entertainment. The major difference between BCWC and conventional wireless systems is the radio channel over which the communication takes place. The human body is a hostile environment from radio propagation perspective and it is therefore important to understand and characterise the effect of the human body on the antenna elements, the radio channel parameters and hence the system performance. This is presented and highlighted in the thesis through a combination of experimental and electromagnetic numerical investigations, with a particular emphasis to the numerical analysis based on the finite-difference time-domain technique. The presented research work encapsulates the characteristics of the narrowband (2.4 GHz) and ultra wide-band (3-10 GHz) on-body radio channels with respect to different digital phantoms, body postures, and antenna types hence highlighting the effect of subject-specific modelling, static and dynamic environments and antenna performance on the overall body-centric network. The investigations covered extend further to include in-body communications where the radio channel for telemetry with medical implants is also analysed by considering the effect of different digital phantoms on the radio channel characteristics. The study supports the significance of developing powerful and reliable numerical modelling to be used in conjunction with measurement campaigns for a comprehensive understanding of the radio channel in body-centric wireless communication. It also emphasises the importance of considering subject-specific electromagnetic modelling to provide a reliable prediction of the network performance

    Diffraction Analysis with UWB Validation for ToA Ranging in the Proximity of Human Body and Metallic Objects

    Get PDF
    The time-of-arrival (ToA)-based localization technique performs superior in line-of-sight (LoS) conditions, and its accuracy degrades drastically in proximity of micro-metals and human body, when LoS conditions are not met. This calls for modeling and formulation of Direct Path (DP) to help with mitigation of ranging error. However, the current propagation tools and models are mainly designed for telecommunication applications via focus on delay spread of wireless channel profile, whereas ToA-based localization strive for modeling of DP component. This thesis provides a mitigation to the limitation of existing propagation tools and models to computationally capture the effects of micro-metals and human body on ToA-based indoor localization. Solutions for each computational technique are validated by empirical measurements using Ultra-Wide-Band (UWB) signals. Finite- Difference-Time-Domain (FDTD) numerical method is used to estimate the ranging errors, and a combination of Uniform-Theory-of-Diffraction (UTD) ray theory and geometrical ray optics properties are utilized to model the path-loss and the ToA of the DP obstructed by micro- metals. Analytical UTD ray theory and geometrical ray optics properties are exploited to model the path-loss and the ToA of the first path obstructed by the human body for the scattering scenarios. The proposed scattering solution expanded to analytically model the path-loss and ToA of the DP obstructed by human body in angular motion for the radiation scenarios

    Radio Analytics for Indoor Monitoring and Human Recognition

    Get PDF
    In the era of Internet of Things (IoT), researchers have been developing new technologies and intelligent systems to answer the question of who, what, when, where, and how of things happening in the environment. Among the various techniques that measure what is happening in the surroundings, wireless sensing stands out because of its ubiquity and prevalence. On one hand, different indoor activities bring distinctive perturbations to wireless radio propagation. On the other hand, thanks to the nature of multipath, indoor environmental information is recorded and embedded in the wireless channel state information (CSI). Hence, by deploying wireless transceivers to sense the radio propagation environment and analyzing the CSI, one can extend human senses and enrich her/his insight into surrounding environments and activities. By leveraging the natural multipath propagation of electromagnetic (EM) waves, radio analytics is proposed as a promising technology that deciphers radio propagation characteristics and reveals rich environmental information surrounding us. As one approach of radio analytics, time-reversal (TR) technique exploits the information of large degrees-of-freedom delivered by CSI and provides a high-resolution spatial-temporal resonance, by treating each multipath component in a wireless channel as a distributed virtual antenna. The TR spatial-temporal resonance is indeed a resonance of EM field in response to the propagation environment, and it changes whenever the propagation environment changes. Inspired by the principle of TR and motivated by the development of IoT, in this dissertation, we propose several radio analytic systems that leverage multipath information to realize IoT applications of recognizing different events and identifying people in an indoor environment. In the first part, we design three indoor monitoring systems that analyze different event-determined features extracted from either a single CSI sample or a CSI time series. The first proposed indoor monitoring system distinguishes between different indoor events by matching the instantaneous CSI to a multipath profile calibrated in a training database whose similarity is quantified by the time-reversal resonance strength (TRRS). Later on, we derive the statistics of TRRS, and we propose a new TR based indoor monitoring system that differentiates between different indoor events based on the statistical behavior of TRRS. Unlike the previous two indoor monitoring systems which treats each CSI as an independent feature, we propose the third indoor monitoring system by exploiting the temporal information embedded in the CSI time series as an additional feature to comprehensively understand indoor events. Results of extensive experiments demonstrate the proposed systems as promising solutions to future indoor monitoring IoT applications. In the second part of this dissertation, we propose the concept of human radio biometrics and design a through-the-wall human identification system that is implemented on commercial WiFi devices. As a human present in an indoor environment, the radio waves propagate around will interact with the human body through reflection and scattering. We define human radio biometrics as the attenuation and alteration of wireless signals brought by human. We achieve an accurate through-the-wall human recognition by utilizing the fact that the radio biometrics are uniquely determined by the biological characteristics of each human. Through extensive experiments, we validate the existence of radio biometrics and evaluate the accuracy of the proposed human identification system. Unlike conventional approaches for biometric recognition, the proposed radio biometrics system can identify human through a wall and supports commercial WiFi infrastructure, thus illustrating its potential for human recognition IoT applications

    Cooperative Radio Communications for Green Smart Environments

    Get PDF
    The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

    Cooperative Radio Communications for Green Smart Environments

    Get PDF
    The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin

    Spectrum handoff strategy for cognitive radio-based Mac in industrial wirless sensor and actuator networks

    Get PDF
    In this thesis, a Cognitive Radio(CR)-based MAC for Industrial Wireless Sensor and Actuator Network (IWSAN) applications is proposed. IWSANs are typically used for closed-loop control applications, and they demand strict requirements in terms of time and robustness. Low latency and low error rates are required in order not to endanger persons or machinery. Moreover, these applications operate in industrial environments such as factories or transport scenarios (as aeronautics or railway) where multipath fading and shadowing are present due to metal surfaces. Furthermore, interference from other communication systems or industrial machinery is also common in these environments. The proposed MAC, based on the CR paradigm, is capable of ensuring time and robustness requirements in industrial channels. In the process of designing the CR-based MAC for IWSAN applications, a comparison between several non-CR-based MACs and CR-based MACs has been carried out. This comparison, which allows stating the benefits of CR for these applications, is presented in this thesis. The performance of every MAC is determined theoretically using Network Calculus, and it is validated through OPNET simulations. CR solutions, due to their adaptability characteristics, are capable of avoiding interference and ensuring robustness in industrial environments. However, none of the selected MACs are capable of ensuring robustness without comprising time requirements, since interference is avoided but not in a bounded time. On the other hand, the MAC proposed in this thesis is capable of avoiding interference ensuring time and robustness requirements at the same time. This MAC is therefore suitable for IWSAN applications. To ensure a deterministic behavior against interference, a novel handoff algorithm, which detects interference and hops to another channel, has been proposed. This algorithm has been designed to be used jointly with one of the evaluated MACs. The detection of the interference and the hop to another channel is done in a bounded time, because the proposed algorithm detects interference while the system is transmitting. The performance of this proposal is evaluated using Network Calculus and OPNET simulations, and the results are compared with the system without the proposed handoff algorithm. The comparison of the results shows how the evaluated MAC is only capable of ensuring both time and robustness requirements when the proposed handoff strategy is used. Moreover, the spectrum sensing algorithm used to obtain information about the environment is delved and its performance is measured through MATLAB simulations. An energy detector has been chosen due to its simplicity. Also, a cyclostationary Modulation Classifier is presented and a simplification has been carried out allowing its implementation on real hardware. The Modulation Classifier is capable of distinguishing between OFDM, QPSK and GFSK signals. The performance of the algorithm is presented in this thesis for different signals and for different receiver impairments such as frequency offset, DC offset and I/Q imbalance. Finally, a cognitive platform to validate the spectrum sensing algorithms is presented. This platform has been designed using a Xilinx Virtex 6 FPGA by a working group composed of researchers from IK4-Ikerlan and Mondragon Unibertsitatea. The platform, which uses both spectrum sensing algorithms, is an Ethernet-to-RF bridge. It has been designed to replace an Ethernet wired link by a wireless one for IWSAN applications. The proposed platform ensures a reliable communication link against interference. In the proposed implementation, the energy detector is used by the transmitter in order to find a free channel to transmit data, whereas the modulation classifier is used by the receiver in order to distinguish between the signal transmitted by the RF-Ethernet bridge and other signals. In this way the receiver can find the channel where the transmitter is carrying out the communication.En esta tesis se propone una MAC basada en el paradigma de la Radio Cognitiva (RC) para redes de sensores y actuadores inalámbricos industriales. Estas redes se suelen utilizar para aplicaciones de control en lazo cerrado, que exigen requisitos estrictos de tiempo y robustez. Para no poner en peligro la salud de las personas o la maquinaria es necesario que la red asegure una baja latencia y una tasa baja de errores. Además, al trabajar en ambientes industriales como fábricas o transportes (trenes, aviones, etc.), estas redes tienen que hacer frente a canales con mucho desvanecimiento por multitrayecto y efecto sombra debido a las superficies metálicas. También es común en estos entornos que haya interferencias de otros sistemas de comunicaciones o de la propia maquinaria industrial. La MAC propuesta en esta tesis es capaz de asegurar los requisitos temporales y de robustez demandados trabajando en este tipo de entornos. En el proceso de diseño de la MAC basada en RC para redes de sensores y actuadores inalámbricos industriales, se ha llevado a cabo una comparación de diferentes MACs diseñadas para estas redes. Se han evaluado tanto MACs basadas en RC como no basadas en ella, estableciendo las ventajas de la RC para estas aplicaciones. La evaluación se ha llevado a cabo haciendo un estudio teórico mediante Network Calculus, cuyos resultados se han validado mediante simulaciones en OPNET. Los resultados muestran como la RC es capaz de evitar interferencias y asegurar robustez en ambientes industriales. Sin embargo, ninguna de las MACs seleccionadas ha conseguido asegurar ambos requisitos, temporales y de robustez, al mismo tiempo; se puede evitar las interferencias pero no sin comprometer los requisitos temporales de la aplicación. Sin embargo, la MAC propuesta es capaz de evitar interferencias asegurando al mismo tiempo los requisitos temporales y de robustez. Por lo tanto, la MAC propuesta es apropiada para este tipo de redes. Para asegurar el comportamiento determinista del sistema, se ha propuesto un novedoso algoritmo de handoff que es capaz de detectar una interferencia y saltar a otro canal. Este algoritmo se ha diseñado para ser utilizado conjuntamente con una de las MACs previamente evaluadas. La detección de la interferencia y el salto a otro canal se hace en un tiempo determinado de tiempo, ya que es posible detectar interferencias mientras el sistema está transmitiendo. Su rendimiento se ha evaluado mediante Network Calculus y simulaciones en OPNET, y se ha comparado con los resultados obtenidos con la MAC cuando no se utiliza el esquema propuesto. De la comparación se deduce que el esquema de handoff añade a la MAC la capacidad de asegurar a la vez los requisitos temporales y de robustez. Además, en la tesis se explica el algoritmo de spectrum sensing que la MAC utiliza para obtener información del entorno, y su rendimiento se ha estudiado mediante simulaciones en MATLAB. Debido a su simplicidad, se ha optado por un detector de energía para este propósito. También se presenta un clasificador de modulaciones cicloestacionario. Este clasificador ha sido simplificado todo lo posible para posibilitar su implementación en hardware real. El clasificador de modulaciones es capaz de distinguir entre señales OFDM, QPSK y GFSK. Su rendimiento se detalla para diferentes señales y para diferentes deficiencias presentes en el receptor, como son offset de frecuencia, offset de continua o desequilibrios I/Q. Por último, se presenta una plataforma cognitiva que se ha utilizado para validar los algoritmos de spectrum sensing. Un grupo de trabajo compuesto por investigadores de IK4-Ikerlan y Mondragon Unibertsitatea ha diseñado esta plataforma sobre una FPGA Virtex 6 de Xilinx. La plataforma, que utiliza los dos algoritmos de spectrum sensing, es un puente Ethernet-RF. Su objetivo es reemplazar un enlace cableado de Ethernet por uno inalámbrico para aplicaciones de redes de sensores y actuadores industriales. Gracias a los algoritmos de spectrum sensing, la plataforma es capaz de asegurar un enlace robusto ante interferencias. El detector de energía se utiliza en el transmisor para encontrar los posibles canales libres donde transmitir la información. Mientras que el clasificador de modulaciones se utiliza en el receptor para distinguir entre la señal del transmisor y otras posibles señales. Esto permite al receptor saber en qué canal de todos los posibles está el transmisor.Tesi honetan proposatzen da Irrati Kognitiboaren (IK) paradigman oinarritutako MAC bat industriako haririk gabeko sentsore eta eragingailuen sareetarako. Sare horiek begizta itxiko kontrol aplikazioetarako erabili ohi dira, denbora eta sendotasunaren aldetik baldintza ugari eskatzen dute eta. Pertsonen osasuna eta makinak arriskuan ez jartzeko, beharrezkoa da sareak latentzia eta hutsegite tasa txikiak bermatzea. Gainera, industri giroetan lan egiteko direnez, esaterako, lantegietan edo garraioetan (trenak, hegazkinak, etab.), sare horiek gai izan behar dira gainazal metalikoek eragiten dituzten ibilbide aniztunaren eta itzal efektuaren ondorioz asko barreiatzen diren kanalei aurre egiteko. Ingurune horien ohiko ezaugarria da, baita ere, beste komunikazio sistema batzuen edo industriako makinen beraien interferentziak egotea. Tesi honetan proposatzen den MACa gai da honelako inguruetan lan egiteko denborari eta sendotasunari dagokienez eskatzen dituen baldintzak ziurtatzeko. IKan oinarrituta haririk gabeko sentsore eta eragingailu industrialen sareetarako MACa diseinatzeko prozesuan, horrelako sareetarako aurkeztu diren hainbat MAC alderatu dira. IKan oinarritutako MACak zein bestelakoak ebaluatu dira, eta IKak aplikazio hauetarako dituen abantailak ezarri dira. Ebaluaziorako Network Calculus erabili da, zeinaren bidez azterketa teoriko bat egin baita, eta azterketaren emaitzak OPNETen simulazioak eginda baliozkotu dira. Emaitzek erakusten dutenez, IKa gai da industriako inguruneetan interferentziak ekidin eta sendotasuna ziurtatzeko. Halere, aukeratu diren MACetatik batek ere ez du lortu baldintza biak, denborari buruzkoa zein sendotasunari buruzkoa, aldi berean ziurtatzea; interferentziak ekidin daitezke, baina ez aplikazioaren denborari buruzko baldintzak arriskuan jarri gabe. Dena dela, proposatu den MACak portaera determinista bat ziurtatzen du interferentziekiko, eta aldi berean denborari eta sendotasunari buruzko baldintzak ere ziurtatzen ditu. Hortaz, MAC hau egokia da sare mota honetarako. Sistemaren portaera determinista ziurtatzeko, handoff algoritmo berritzailea proposatu da, zeina interferentzia bat antzeman eta beste kanal bat igarotzeko gai den. Algoritmo hori aurretik ebaluatutakoa MACetako batekin batera erabiltzeko diseinatu da. Interferentzia antzeman eta beste kanal batera salto egitea denbora jakin batean egiten da, izan ere, sistema transmititzen ari dela antzeman baitaitezke interferentziak. Network Calculusen bitartez eta OPNETeko simulazioen bitartez ebaluatu da sistemaren errendimendua, eta proposatutako eskema erabiltzen ez denean MACak ematen dituen emaitzekin alderatu da. Alderaketa horretatik ondorioztatzen denez, handoff eskemak denborari eta sendotasunari buruzko baldintzak batera ziurtatzeko ahalmena ematen dio MACari. Gainera, tesiak azaltzen du inguruneari buruzko informazioa eskuratzeko MACak erabiltzen duen spectrum sensing algoritmoa, eta bere errendimendua MATLABen simulazioak eginez aztertu da. Bere sinpletasuna dela eta, energia detektore bat aukeratu da asmo honetarako. Modulazio sailkatzaile zikloegonkor bat ere aurkezten da. Sailkapen hori ahalik eta gehien sinplifikatu da benetako hardwarean inplementatu ahal izateko. Modulazioen sailkatzaileak OFDM, QPSK eta GFSK seinaleak bereizi ditzake. Bere errendimendua hargailuan dauden seinale eta akats desberdinetarako zehazten da, esaterako maiztasunaren offset-a,zuzenaren offset-a edo I/Q desorekak. Bukatzeko, spectrum sensing-eko algoritmoak baliozkotzeko erabili den plataforma kognitibo bat aurkezten da. IK4-Ikerlaneko eta Mondragon Unibertsitateko ikertzailez osatutako lantalde batek diseinatu du plataforma hori Xilinxen Virtex 6 FPGA baten oinarrutz. Plataformak spectrum sensing-eko bi algoritmo erabiltzen ditu eta Ethernet-RF zubi bat da. Bere helburua da Etherneteko kable bidezko lotura bat haririk gabeko batekin ordeztea industriako sentsore eta eragingailuen sareetan aplikatzeko. Spectrum sensing-eko algoritmoei esker, plataformak lotura sendoa bermatu dezake interferentziak gertatzen direnean. Energia detektorea transmisorean erabiltzen da informazioa transmititzeko erabilgarri egon daitezkeen kanalak aurkitzeko. Modulazioen sailkatzailea, berriz, hargailuan erabiltzen da transmisorearen seinalea eta egon daitezkeen beste seinale batzuk bereizteko. Horri esker, hargailuak badaki posible diren kanal guztietatik non dagoen transmisorea

    Radar Technology

    Get PDF
    In this book “Radar Technology”, the chapters are divided into four main topic areas: Topic area 1: “Radar Systems” consists of chapters which treat whole radar systems, environment and target functional chain. Topic area 2: “Radar Applications” shows various applications of radar systems, including meteorological radars, ground penetrating radars and glaciology. Topic area 3: “Radar Functional Chain and Signal Processing” describes several aspects of the radar signal processing. From parameter extraction, target detection over tracking and classification technologies. Topic area 4: “Radar Subsystems and Components” consists of design technology of radar subsystem components like antenna design or waveform design
    corecore