Evaluation of haptic guidance virtual fixtures and 3D visualization methods in telemanipulation—a user study

© 2019, The Author(s). This work presents a user-study evaluation of various visual and haptic feedback modes on a real telemanipulation platform. Of particular interest is the potential for haptic guidance virtual fixtures and 3D-mapping techniques to enhance efficiency and awareness in a simple teleoperated valve turn task. An RGB-Depth camera is used to gather real-time color and geometric data of the remote scene, and the operator is presented with either a monocular color video stream, a 3D-mapping voxel representation of the remote scene, or the ability to place a haptic guidance virtual fixture to help complete the telemanipulation task. The efficacy of the feedback modes is then explored experimentally through a user study, and the different modes are compared on the basis of objective and subjective metrics. Despite the simplistic task and numerous evaluation metrics, results show that the haptic virtual fixture resulted in significantly better collision avoidance compared to 3D visualization alone. Anticipated performance enhancements were also observed moving from 2D to 3D visualization. Remaining comparisons lead to exploratory inferences that inform future direction for focused and statistically significant studies

Complementary Situational Awareness for an Intelligent Telerobotic Surgical Assistant System

Robotic surgical systems have contributed greatly to the advancement of Minimally Invasive Surgeries (MIS). More specifically, telesurgical robots have provided enhanced dexterity to surgeons performing MIS procedures. However, current robotic teleoperated systems have only limited situational awareness of the patient anatomy and surgical environment that would typically be available to a surgeon in an open surgery. Although the endoscopic view enhances the visualization of the anatomy, perceptual understanding of the environment and anatomy is still lacking due to the absence of sensory feedback. In this work, these limitations are addressed by developing a computational framework to provide Complementary Situational Awareness (CSA) in a surgical assistant. This framework aims at improving the human-robot relationship by providing elaborate guidance and sensory feedback capabilities for the surgeon in complex MIS procedures. Unlike traditional teleoperation, this framework enables the user to telemanipulate the situational model in a virtual environment and uses that information to command the slave robot with appropriate admittance gains and environmental constraints. Simultaneously, the situational model is updated based on interaction of the slave robot with the task space environment. However, developing such a system to provide real-time situational awareness requires that many technical challenges be met. To estimate intraoperative organ information continuous palpation primitives are required. Intraoperative surface information needs to be estimated in real-time while the organ is being palpated/scanned. The model of the task environment needs to be updated in near real-time using the estimated organ geometry so that the force-feedback applied on the surgeon's hand would correspond to the actual location of the model. This work presents a real-time framework that meets these requirements/challenges to provide situational awareness of the environment in the task space. Further, visual feedback is also provided for the surgeon/developer to view the near video frame rate updates of the task model. All these functions are executed in parallel and need to have a synchronized data exchange. The system is very portable and can be incorporated to any existing telerobotic platforms with minimal overhead

Image-Guided Robot-Assisted Techniques with Applications in Minimally Invasive Therapy and Cell Biology

There are several situations where tasks can be performed better robotically rather than manually. Among these are situations (a) where high accuracy and robustness are required, (b) where difficult or hazardous working conditions exist, and (c) where very large or very small motions or forces are involved. Recent advances in technology have resulted in smaller size robots with higher accuracy and reliability. As a result, robotics is fi nding more and more applications in Biomedical Engineering. Medical Robotics and Cell Micro-Manipulation are two of these applications involving interaction with delicate living organs at very di fferent scales.Availability of a wide range of imaging modalities from ultrasound and X-ray fluoroscopy to high magni cation optical microscopes, makes it possible to use imaging as a powerful means to guide and control robot manipulators. This thesis includes three parts focusing on three applications of Image-Guided Robotics in biomedical engineering, including: Vascular Catheterization: a robotic system was developed to insert a catheter through the vasculature and guide it to a desired point via visual servoing. The system provides shared control with the operator to perform a task semi-automatically or through master-slave control. The system provides control of a catheter tip with high accuracy while reducing X-ray exposure to the clinicians and providing a more ergonomic situation for the cardiologists. Cardiac Catheterization: a master-slave robotic system was developed to perform accurate control of a steerable catheter to touch and ablate faulty regions on the inner walls of a beating heart in order to treat arrhythmia. The system facilitates touching and making contact with a target point in a beating heart chamber through master-slave control with coordinated visual feedback. Live Neuron Micro-Manipulation: a microscope image-guided robotic system was developed to provide shared control over multiple micro-manipulators to touch cell membranes in order to perform patch clamp electrophysiology. Image-guided robot-assisted techniques with master-slave control were implemented for each case to provide shared control between a human operator and a robot. The results show increased accuracy and reduced operation time in all three cases

Modeling and Control of Steerable Ablation Catheters

Catheters are long, flexible tubes that are extensively used in vascular and cardiac interventions, e.g., cardiac ablation, coronary angiography and mitral valve annuloplasty. Catheter-based cardiac ablation is a well-accepted treatment for atrial fibrillation, a common type of cardiac arrhythmia. During this procedure, a steerable ablation catheter is guided through the vasculature to the left atrium to correct the signal pathways inside the heart and restore normal heart rhythm. The outcome of the ablation procedure depends mainly on the correct positioning of the catheter tip at the target location inside the heart and also on maintaining a consistent contact between the catheter tip and cardiac tissue. In the presence of cardiac and respiratory motions, achieving these goals during the ablation procedure is very challenging without proper 3D visualization, dexterous control of the flexible catheter and an estimate of the catheter tip/tissue contact force. This research project provides the required basis for developing a robotics-assisted catheter manipulation system with contact force control for use in cardiac ablation procedures. The behavior of the catheter is studied in free space as well in contact with the environment to develop mathematical models of the catheter tip that are well suited for developing control systems. The validity of the proposed modeling approaches and the performance of the suggested control techniques are evaluated experimentally. As the first step, the static force-deflection relationship for ablation catheters is described with a large-deflection beam model and an optimized pseudo-rigid-body 3R model. The proposed static model is then used in developing a control system for controlling the contact force when the catheter tip is interacting with a static environment. Our studies also showed that it is possible to estimate the tip/tissue contact force by analyzing the shape of the catheter without installing a force sensor on the catheter. During cardiac ablation, the catheter tip is in contact with a relatively fast moving environment (cardiac tissue). Robotic manipulation of the catheter has the potential to improve the quality of contact between the catheter tip and cardiac tissue. To this end, the frequency response of the catheter is investigated and a control technique is proposed to compensate for the cardiac motion and to maintain a constant tip/tissue contact force. Our study on developing a motion compensated robotics-assisted catheter manipulation system suggests that redesigning the actuation mechanism of current ablation catheters would provide a major improvement in using these catheters in robotics-assisted cardiac ablation procedures

Model Driven Robotic Assistance for Human-Robot Collaboration

While robots routinely perform complex assembly tasks in highly structured factory environments, it is challenging to apply completely autonomous robotic systems in less structured manipulation tasks, such as surgery and machine assembly/repair, due to the limitations of machine intelligence, sensor data interpretation and environment modeling. A practical, yet effective approach to accomplish these tasks is through human-robot collaboration, in which the human operator and the robot form a partnership and complement each other in performing a complex task. We recognize that humans excel at determining task goals and recognizing constraints, if given sufficient feedback about the interaction between the tool (e.g., end-effector of the robot) and the environment. Robots are precise, unaffected by fatigue and able to work in environments not suitable for humans. We hypothesize that by providing the operator with adequate information about the task, through visual and force (haptic) feedback, the operator can: (1) define the task model, in terms of task goals and virtual fixture constraints through an interactive, or immersive augmented reality interface, and (2) have the robot actively assist the operator to enhance the execution time, quality and precision of the tasks. We validate our approaches through the implementations of both cooperative (i.e., hands-on) control and telerobotic systems, for image-guided robotic neurosurgery and telerobotic manipulation tasks for satellite servicing under significant time delay

Estimating Target Vessel Location on Robot-Assisted CABG using Feature-based CT to US Registration

Although robot-assisted coronary artery bypass grafting (RA-CABG) has gained more acceptance worldwide, its success still depends on the surgeon’s experience and expertise, and the conversion rate to full sternotomy is in the order of 15%—25%. One of the reasons for conversion is poor pre-operative planning, which is based solely on pre-operative computed tomography (CT) images. This thesis proposes a technique to estimate the global peri-operative displacement of the heart and to predict the intra-operative target vessel location. The technique has been validated via both an in vitro and a clinical study, and predicted the position of the peri-operative target vessel location with ~ 3.5 mm RMS accuracy in the in vitro study while it yielded ~ 5.0 mm accuracy for the clinical validation. As the desired clinical accuracy imposed by this procedure is on the order of one intercostal space (10 - 15 mm), our technique suits the clinical requirements. It is therefore believed that this technique has the potential to improve the pre-operative planning by updating peri-operative migration patterns of the heart and, consequently, will lead to reduced conversion to conventional open thoracic procedures

Haptics: Science, Technology, Applications

This open access book constitutes the proceedings of the 13th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2022, held in Hamburg, Germany, in May 2022. The 36 regular papers included in this book were carefully reviewed and selected from 129 submissions. They were organized in topical sections as follows: haptic science; haptic technology; and haptic applications

Intuitive, iterative and assisted virtual guides programming for human-robot comanipulation

Pendant très longtemps, l'automatisation a été assujettie à l'usage de robots industriels traditionnels placés dans des cages et programmés pour répéter des tâches plus ou moins complexes au maximum de leur vitesse et de leur précision. Cette automatisation, dite rigide, possède deux inconvénients majeurs : elle est chronophage dû aux contraintes contextuelles applicatives et proscrit la présence humaine. Il existe désormais une nouvelle génération de robots avec des systèmes moins encombrants, peu coûteux et plus flexibles. De par leur structure et leurs modes de fonctionnement ils sont intrinsèquement sûrs ce qui leurs permettent de travailler main dans la main avec les humains. Dans ces nouveaux espaces de travail collaboratifs, l'homme peut être inclus dans la boucle comme un agent décisionnel actif. En tant qu'instructeur ou collaborateur il peut influencer le processus décisionnel du robot : on parle de robots collaboratifs (ou cobots). Dans ce nouveau contexte, nous faisons usage de guides virtuels. Ils permettent aux cobots de soulager les efforts physiques et la charge cognitive des opérateurs. Cependant, la définition d'un guide virtuel nécessite souvent une expertise et une modélisation précise de la tâche. Cela restreint leur utilité aux scénarios à contraintes fixes. Pour palier ce problème et améliorer la flexibilité de la programmation du guide virtuel, cette thèse présente une nouvelle approche par démonstration : nous faisons usage de l'apprentissage kinesthésique de façon itérative et construisons le guide virtuel avec une spline 6D. Grâce à cette approche, l'opérateur peut modifier itérativement les guides tout en gardant leur assistance. Cela permet de rendre le processus plus intuitif et naturel ainsi que de réduire la pénibilité. La modification locale d'un guide virtuel en trajectoire est possible par interaction physique avec le robot. L'utilisateur peut déplacer un point clé cartésien ou modifier une portion entière du guide avec une nouvelle démonstration partielle. Nous avons également étendu notre approche aux guides virtuels 6D, où les splines en déplacement sont définies via une interpolation Akima (pour la translation) et une 'interpolation quadratique des quaternions (pour l'orientation). L'opérateur peut initialement définir un guide virtuel en trajectoire, puis utiliser l'assistance en translation pour ne se concentrer que sur la démonstration de l'orientation. Nous avons appliqué notre approche dans deux scénarios industriels utilisant un cobot. Nous avons ainsi démontré l'intérêt de notre méthode qui améliore le confort de l'opérateur lors de la comanipulation.For a very long time, automation was driven by the use of traditional industrial robots placed in cages, programmed to repeat more or less complex tasks at their highest speed and with maximum accuracy. This robot-oriented solution is heavily dependent on hard automation which requires pre-specified fixtures and time consuming programming, hindering robots from becoming flexible and versatile tools. These robots have evolved towards a new generation of small, inexpensive, inherently safe and flexible systems that work hand in hand with humans. In these new collaborative workspaces the human can be included in the loop as an active agent. As a teacher and as a co-worker he can influence the decision-making process of the robot. In this context, virtual guides are an important tool used to assist the human worker by reducing physical effort and cognitive overload during tasks accomplishment. However, the construction of virtual guides often requires expert knowledge and modeling of the task. These limitations restrict the usefulness of virtual guides to scenarios with unchanging constraints. To overcome these challenges and enhance the flexibility of virtual guides programming, this thesis presents a novel approach that allows the worker to create virtual guides by demonstration through an iterative method based on kinesthetic teaching and displacement splines. Thanks to this approach, the worker is able to iteratively modify the guides while being assisted by them, making the process more intuitive and natural while reducing its painfulness. Our approach allows local refinement of virtual guiding trajectories through physical interaction with the robots. We can modify a specific cartesian keypoint of the guide or re- demonstrate a portion. We also extended our approach to 6D virtual guides, where displacement splines are defined via Akima interpolation (for translation) and quadratic interpolation of quaternions (for orientation). The worker can initially define a virtual guiding trajectory and then use the assistance in translation to only concentrate on defining the orientation along the path. We demonstrated that these innovations provide a novel and intuitive solution to increase the human's comfort during human-robot comanipulation in two industrial scenarios with a collaborative robot (cobot)