Feasibility of LoRa for Smart Home Indoor Localization

With the advancement of low-power and low-cost wireless technologies in the past few years, the Internet of Things (IoT) has been growing rapidly in numerous areas of Industry 4.0 and smart homes. With the development of many applications for the IoT, indoor localization, i.e., the capability to determine the physical location of people or devices, has become an important component of smart homes. Various wireless technologies have been used for indoor localization includingWiFi, ultra-wideband (UWB), Bluetooth low energy (BLE), radio-frequency identification (RFID), and LoRa. The ability of low-cost long range (LoRa) radios for low-power and long-range communication has made this radio technology a suitable candidate for many indoor and outdoor IoT applications. Additionally, research studies have shown the feasibility of localization with LoRa radios. However, indoor localization with LoRa is not adequately explored at the home level, where the localization area is relatively smaller than offices and corporate buildings. In this study, we first explore the feasibility of ranging with LoRa. Then, we conduct experiments to demonstrate the capability of LoRa for accurate and precise indoor localization in a typical apartment setting. Our experimental results show that LoRa-based indoor localization has an accuracy better than 1.6 m in line-of-sight scenario and 3.2 m in extreme non-line-of-sight scenario with a precision better than 25 cm in all cases, without using any data filtering on the location estimates

Distributed Real-time Systems - Deterministic Protocols for Wireless Networks and Model-Driven Development with SDL

In a networked system, the communication system is indispensable but often the weakest link w.r.t. performance and reliability. This, particularly, holds for wireless communication systems, where the error- and interference-prone medium and the character of network topologies implicate special challenges. However, there are many scenarios of wireless networks, in which a certain quality-of-service has to be provided despite these conditions. In this regard, distributed real-time systems, whose realization by wireless multi-hop networks becomes increasingly popular, are a particular challenge. For such systems, it is of crucial importance that communication protocols are deterministic and come with the required amount of efficiency and predictability, while additionally considering scarce hardware resources that are a major limiting factor of wireless sensor nodes. This, in turn, does not only place demands on the behavior of a protocol but also on its implementation, which has to comply with timing and resource constraints. The first part of this thesis presents a deterministic protocol for wireless multi-hop networks with time-critical behavior. The protocol is referred to as Arbitrating and Cooperative Transfer Protocol (ACTP), and is an instance of a binary countdown protocol. It enables the reliable transfer of bit sequences of adjustable length and deterministically resolves contest among nodes based on a flexible priority assignment, with constant delays, and within configurable arbitration radii. The protocol's key requirement is the collision-resistant encoding of bits, which is achieved by the incorporation of black bursts. Besides revisiting black bursts and proposing measures to optimize their detection, robustness, and implementation on wireless sensor nodes, the first part of this thesis presents the mode of operation and time behavior of ACTP. In addition, possible applications of ACTP are illustrated, presenting solutions to well-known problems of distributed systems like leader election and data dissemination. Furthermore, results of experimental evaluations with customary wireless transceivers are outlined to provide evidence of the protocol's implementability and benefits. In the second part of this thesis, the focus is shifted from concrete deterministic protocols to their model-driven development with the Specification and Description Language (SDL). Though SDL is well-established in the domain of telecommunication and distributed systems, the predictability of its implementations is often insufficient as previous projects have shown. To increase this predictability and to improve SDL's applicability to time-critical systems, real-time tasks, an approved concept in the design of real-time systems, are transferred to SDL and extended to cover node-spanning system tasks. In this regard, a priority-based execution and suspension model is introduced in SDL, which enables task-specific priority assignments in the SDL specification that are orthogonal to the static structure of SDL systems and control transition execution orders on design as well as on implementation level. Both the formal incorporation of real-time tasks into SDL and their implementation in a novel scheduling strategy are discussed in this context. By means of evaluations on wireless sensor nodes, evidence is provided that these extensions reduce worst-case execution times substantially, and improve the predictability of SDL implementations and the language's applicability to real-time systems

Network virtualization as an integrated solution for emergency communication

In this paper the Virtual Private Ad Hoc Networking (VPAN) platform is introduced as an integrated networking solution for many applications that require secure transparent continuous connectivity using heterogeneous devices and network technologies. This is done by creating a virtual logical self-organizing network on top of existing network technologies reducing complexity and maintaining session continuity right from the start. One of the most interesting applications relies in the field of emergency communication with its specific needs which will be discussed in this paper and matched in detail against the architecture and features of the VPAN platform. The concept and dynamics are demonstrated and evaluated with measurements done on real hardware

Performance evaluation of information and communications technology infrastructure for smart distribution network applications

This thesis was submitted for the degree of Master of Philosophy and awarded by Brunel University.Current electrical networks require secure, scalable and cost-effective Information and Communications Technology (ICT) solutions to facilitate the novel functionalities required by Smart Grids. Countries around the globe are investigating alternative energy sources to mitigate the current energy crisis and environmental issues experienced by many countries due to global warming, rapid growth of population, inefficient energy management, dwindling fossil fuel resources, etc. Therefore, alternative or renewable energy sources, such as wind, solar, hydro, combined heat and power, etc., are required to mitigate such a crisis and such sources will also need to be integrated in to the power grid in a distributed manner. Such distributed energy sources are mainly connected to the distribution networks and introduce huge challenges to the distribution network operator (DNO). Many of these challenges cannot be dealt with effectively using existing network operation mechanisms therefore the research and development of novel ICT solutions to support smart distribution network operation is required. This research investigated suitable ICT solutions to enable the Smart Grid to tackle these challenges and proposes ICT infrastructure models that can be used for simulation studies in order to investigate cost-effective, scalable and secure solutions for the DNOs. Initially, a Quality of Service (QoS) monitoring test-bed was proposed to evaluate the performance of bandwidth intensive applications, such as smart meter data transmission. Simulation studies for different communication technologies, cellular and Power Line Communication (PLC), were also carried out and the simulation models were verified using experimental test results. Finally, the modelling and analysis of smart metering infrastructure was carried out using simulation and extensive studies were performed to evaluate the data transmission rate performance for different configurations of smart meters and concentrators

Federated Learning in Mobile Edge Networks: A Comprehensive Survey

In recent years, mobile devices are equipped with increasingly advanced sensing and computing capabilities. Coupled with advancements in Deep Learning (DL), this opens up countless possibilities for meaningful applications. Traditional cloudbased Machine Learning (ML) approaches require the data to be centralized in a cloud server or data center. However, this results in critical issues related to unacceptable latency and communication inefficiency. To this end, Mobile Edge Computing (MEC) has been proposed to bring intelligence closer to the edge, where data is produced. However, conventional enabling technologies for ML at mobile edge networks still require personal data to be shared with external parties, e.g., edge servers. Recently, in light of increasingly stringent data privacy legislations and growing privacy concerns, the concept of Federated Learning (FL) has been introduced. In FL, end devices use their local data to train an ML model required by the server. The end devices then send the model updates rather than raw data to the server for aggregation. FL can serve as an enabling technology in mobile edge networks since it enables the collaborative training of an ML model and also enables DL for mobile edge network optimization. However, in a large-scale and complex mobile edge network, heterogeneous devices with varying constraints are involved. This raises challenges of communication costs, resource allocation, and privacy and security in the implementation of FL at scale. In this survey, we begin with an introduction to the background and fundamentals of FL. Then, we highlight the aforementioned challenges of FL implementation and review existing solutions. Furthermore, we present the applications of FL for mobile edge network optimization. Finally, we discuss the important challenges and future research directions in F

ReSCon '09, Research Student Conference: Book of Abstracts

The second SED Research Student Conference (ReSCon2009) was hosted over three days, 22-24 June 2009, in the Lecture Centre at Brunel University. The conference consisted of technical presentations, a poster session and social events. The abstracts and presentations were the result of ongoing research by postgraduate research students from the School of Engineering and Design at Brunel University. The conference is held annually, and ReSCon plays a key role in contributing to research and innovations within the School

Innovative Technologies and Services for Smart Cities

A smart city is a modern technology-driven urban area which uses sensing devices, information, and communication technology connected to the internet of things (IoTs) for the optimum and efficient utilization of infrastructures and services with the goal of improving the living conditions of citizens. Increasing populations, lower budgets, limited resources, and compatibility of the upgraded technologies are some of the few problems affecting the implementation of smart cities. Hence, there is continuous advancement regarding technologies for the implementation of smart cities. The aim of this Special Issue is to report on the design and development of integrated/smart sensors, a universal interfacing platform, along with the IoT framework, extending it to next-generation communication networks for monitoring parameters of interest with the goal of achieving smart cities. The proposed universal interfacing platform with the IoT framework will solve many challenging issues and significantly boost the growth of IoT-related applications, not just in the environmental monitoring domain but in the other key areas, such as smart home, assistive technology for the elderly care, smart city with smart waste management, smart E-metering, smart water supply, intelligent traffic control, smart grid, remote healthcare applications, etc., signifying benefits for all countries

Modellierung und Evaluierung der “Required Communication Performance” von Luft-Boden Datenverbindungen mit “Erasure Codes”.

In this work, a model to calculate the air-ground data link performance using the “Required Communication Performance” metric used in aviation is proposed. This model is applied to evaluate the performance of data links and to estimate the minimum link performance required to meet the safety requirements. The results show that it is highly unlikely that air-ground data links achieve the minimum performance. “Erasure codes” and a multiple link concept are proposed and evaluated to improve the performance of the links.Diese Arbeit beschreibt ein Modell, mit welcher die Leistung von Luft-Boden Datenverbindungen unter Verwendung der in der Luftfahrt verwendeten Metrik „Required Communication Performance“, berechnet werden. Dieses Modell wird angewendet, um die Leistung von Datenverbindungen zu bewerten und die minimale Verbindungsleistung abzuschätzen, die erforderlich ist, um die Sicherheitsanforderungen zu erfüllen. Die Ergebnisse zeigen, dass es sehr unwahrscheinlich ist, dass Luft-Boden Datenverbindungen die Mindestleistung erreichen. Zur Verbesserung der Leistung der Links werden Konzepte basierend auf “Erasure Codes" und mehreren Links vorgeschlagen und evaluiert