P2VSIM: A SIMULATION AND VISUALIZATION TOOL FOR THE P2V COMPILER

The Property Specification Language (PSL) is an IEEE standard which allows developers to specify precise behavioral properties of hardware designs. PSL assertions can be embedded within code written in hardware description languages (HDL) such as Verilog to monitor signals of interest. Debugging simulations at the register transfer level (RTL) is often required to verify the functionality of a design before synthesis. Traditional methods of RTL debugging can help locate failures, but do not necessarily immediately help in discovering the reasons for the failures. The P2VSim tool presents the ability to combine multiple Verilog signals not only instantaneously, but also across multiple clock cycles, producing a graphical display of the state of active PSL assertions in a given RTL simulation. When using the P2VSim tool, users will write PSL assertions directly into their Verilog source files. After the tool searches for and loads the embedded assertions, execution trace monitors for the relevant Verilog signals are dynamically generated and written back into the Verilog source code. P2VSim then invokes an RTL simulator, Modelsim, to generate a simulation execution trace, requiring that the designer has some hardware or software testbench already in place. Next, the input PSL assertions are parsed into time intervals that have logical and temporal properties. These intervals are to be displayed graphically when PSL property checking is performed. Finally, the user is allowed to step through simulation one cycle at a time, while the tool applies the simulation execution trace to the instantiated time intervals, performing PSL property checking at each clock cycle. From this, the user can witness the exact clock cycles when PSL assertions are satisfied or violated, along with the causes of such results

On the Reuse of RTL assertions in Systemc TLM Verification

Reuse of existing and already verified intellectual property (IP) models is a key strategy to cope with the com- plexity of designing modern system-on-chips (SoC)s under ever stringent time-to-market requirements. In particular, the recent trend towards system-level design and transaction level modeling (TLM) gives rise to new challenges for reusing existing RTL IPs and their verification environment in TLM-based design flows. While techniques and tools to abstract RTL IPs into TLM models have begun to appear, the problem of reusing, at TLM, a verification environment originally developed for an RTL IP is still underexplored, particularly when assertion-based verification (ABV) is adopted. Some techniques and frameworks have been proposed to deal with ABV at TLM, but they assume a top-down design and verification flow, where assertions are defined ex-novo at TLM level. In contrast, the reuse of existing assertions in an RTL-to-TLM bottom-up design flow has not been analyzed yet. This paper proposes a methodology to reuse assertions originally defined for a given RTL IP, to verify the corresponding TLM model. Experimental results have been conducted on benchmarks of different characteristics and complexity to show the applicability and the efficacy of the proposed methodology

Reusing RTL assertion checkers for verification of SystemC TLM models

The recent trend towards system-level design gives rise to new challenges for reusing existing RTL intellectual properties (IPs) and their verification environment in TLM. While techniques and tools to abstract RTL IPs into TLM models have begun to appear, the problem of reusing, at TLM, a verification environment originally developed for an RTL IP is still under-explored, particularly when ABV is adopted. Some frameworks have been proposed to deal with ABV at TLM, but they assume a top-down design and verification flow, where assertions are defined ex-novo at TLM level. In contrast, the reuse of existing assertions in an RTL-to-TLM bottom-up design flow has not been analyzed yet, except by using transactors to create a mixed simulation between the TLM design and the RTL checkers corresponding to the assertions. However, the use of transactors may lead to longer verification time due to the need of developing and verifying the transactors themselves. Moreover, the simulation time is negatively affected by the presence of transactors, which slow down the simulation at the speed of the slowest parts (i.e., RTL checkers). This article proposes an alternative methodology that does not require transactors for reusing assertions, originally defined for a given RTL IP, in order to verify the corresponding TLM model. Experimental results have been conducted on benchmarks with different characteristics and complexity to show the applicability and the efficacy of the proposed methodology

Contracts for Systems Design: Theory

Aircrafts, trains, cars, plants, distributed telecommunication military or health care systems,and more, involve systems design as a critical step. Complexity has caused system design times and coststo go severely over budget so as to threaten the health of entire industrial sectors. Heuristic methods andstandard practices do not seem to scale with complexity so that novel design methods and tools based on astrong theoretical foundation are sorely needed. Model-based design as well as other methodologies suchas layered and compositional design have been used recently but a unified intellectual framework with acomplete design flow supported by formal tools is still lacking.Recently an “orthogonal” approach has been proposed that can be applied to all methodologies introducedthus far to provide a rigorous scaffolding for verification, analysis and abstraction/refinement: contractbaseddesign. Several results have been obtained in this domain but a unified treatment of the topic that canhelp in putting contract-based design in perspective is missing. This paper intends to provide such treatmentwhere contracts are precisely defined and characterized so that they can be used in design methodologiessuch as the ones mentioned above with no ambiguity. In addition, the paper provides an important linkbetween interface and contract theories to show similarities and correspondences.This paper is complemented by a companion paper where contract based design is illustrated throughuse cases

Formale Verifikationsmethodiken für nichtlineare analoge Schaltungen

The objective of this thesis is to develop new methodologies for formal verification of nonlinear analog circuits. Therefore, new approaches to discrete modeling of analog circuits, specification of analog circuit properties and formal verification algorithms are introduced. Formal approaches to verification of analog circuits are not yet introduced into industrial design flows and still subject to research. Formal verification proves specification conformance for all possible input conditions and all possible internal states of a circuit. Automatically proving that a model of the circuit satisfies a declarative machine-readable property specification is referred to as model checking. Equivalence checking proves the equivalence of two circuit implementations. Starting from the state of the art in modeling analog circuits for simulation-based verification, discrete modeling of analog circuits for state space-based formal verification methodologies is motivated in this thesis. In order to improve the discrete modeling of analog circuits, a new trajectory-directed partitioning algorithm was developed in the scope of this thesis. This new approach determines the partitioning of the state space parallel or orthogonal to the trajectories of the state space dynamics. Therewith, a high accuracy of the successor relation is achieved in combination with a lower number of states necessary for a discrete model of equal accuracy compared to the state-of-the-art hyperbox-approach. The mapping of the partitioning to a discrete analog transition structure (DATS) enables the application of formal verification algorithms. By analyzing digital specification concepts and the existing approaches to analog property specification, the requirements for a new specification language for analog properties have been discussed in this thesis. On the one hand, it shall meet the requirements for formal specification of verification approaches applied to DATS models. On the other hand, the language syntax shall be oriented on natural language phrases. By synthesis of these requirements, the analog specification language (ASL) was developed in the scope of this thesis. The verification algorithms for model checking, that were developed in combination with ASL for application to DATS models generated with the new trajectory-directed approach, offer a significant enhancement compared to the state of the art. In order to prepare a transition of signal-based to state space-based verification methodologies, an approach to transfer transient simulation results from non-formal test bench simulation flows into a partial state space representation in form of a DATS has been developed in the scope of this thesis. As has been demonstrated by examples, the same ASL specification that was developed for formal model checking on complete discrete models could be evaluated without modifications on transient simulation waveforms. An approach to counterexample generation for the formal ASL model checking methodology offers to generate transition sequences from a defined starting state to a specification-violating state for inspection in transient simulation environments. Based on this counterexample generation, a new formal verification methodology using complete state space-covering input stimuli was developed. By conducting a transient simulation with these complete state space-covering input stimuli, the circuit adopts every state and transition that were visited during stimulus generation. An alternative formal verification methodology is given by retransferring the transient simulation responses to a DATS model and by applying the ASL verification algorithms in combination with an ASL property specification. Moreover, the complete state space-covering input stimuli can be applied to develop a formal equivalence checking methodology. Therewith, the equivalence of two implementations can be proven for every inner state of both systems by comparing the transient simulation responses to the complete-coverage stimuli of both circuits. In order to visually inspect the results of the newly introduced verification methodologies, an approach to dynamic state space visualization using multi-parallel particle simulation was developed. Due to the particles being randomly distributed over the complete state space and moving corresponding to the state space dynamics, another perspective to the system's behavior is provided that covers the state space and hence offers formal results. The prototypic implementations of the formal verification methodologies developed in the scope of this thesis have been applied to several example circuits. The acquired results for the new approaches to discrete modeling, specification and verification algorithms all demonstrate the capability of the new verification methodologies to be applied to complex circuit blocks and their properties.Gegenstand dieser Dissertation ist die Entwicklung neuer Methodiken zur formalen Verifikation nichtlinearer analoger elektronischer Schaltungen. Dazu werden im Rahmen dieser Arbeit entstandene neue Ansätze in den Bereichen verifikationsgerechte diskrete Modellierung analoger Schaltungen, Spezifikation analoger Schaltungseigenschaften und formale Verifikationsalgorithmen vorgestellt. Ausgehend vom Stand der Technik der Modellierung analoger Schaltungen für die simulationsbasierte Verifikation wird im Rahmen dieser Arbeit die diskrete Modellierung analoger Schaltungen für zustandsraumbasierte formale Verifikationsverfahren betrachtet. Dazu wurde ein neuer Ansatz zur diskreten Modellierung entwickelt, der die Aufteilungsstruktur anhand der Trajektorien der Vektorfelddynamik bestimmt. So wird eine hohe Genauigkeit der Nachfolgerrelation ermöglicht, woraus eine niedrigere Zahl an Zuständen für ein diskretes Modell gleicher Genauigkeit im Vergleich mit dem bisherigen Stand der Technik folgt. Die Abbildung der Trajektorien-gesteuerten Partitionierung auf eine diskrete analoge Transitionsstruktur (DATS) erlaubt die Anwendung von formalen Verifikationsalgorithmen. Die formale Spezifikation von Eigenschaften in ersten Ansätzen zum Model Checking analoger Schaltungen hat sich stark an den bestehenden temporallogischen Verfahren aus dem Bereich digitaler Hardware orientiert. Ausgehend von einer Analyse digitaler Spezifikationskonzepte und der bestehenden Ansätze für analoge Eigenschaften wurden Anforderungen an eine neue Spezifikationssprache in dieser Arbeit abgeleitet. Die aus diesen Anforderungen im Rahmen dieser Arbeit entwickelte analoge Spezifikationssprache "Analog Specification Language" (ASL) basiert auf einer natürlichsprachlichen Kapselung temporallogischer Operationen, die mit erweiterten Algorithmen zur Transitionspfadbestimmung, Durchführung von Berechnungen auf Zustandsparametern und Oszillationsbestimmung eine hohe Ausdrucksstärke analoger Eigenschaften mit einer anwenderfreundlichen Syntax kombinieren konnte. Die zusammen mit ASL entwickelten Model Checking-Verifikationsalgorithmen zur Auswertung von ASL-Spezifikationen auf einem mit dem Trajektorien-gesteuerten Diskretisierungsverfahren erzeugten DATS-Modell bilden eine wesentliche Erweiterung zum Stand der Technik. Um einen Übergang der Verifikation von signalbasierten zu zustandsraumbasierten Methodiken zu ermöglichen, wurde im Rahmen dieser Arbeit ein Ansatz entwickelt, der die Übertragung von transienten Simulationsergebnissen aus nicht-formalen Testbench-Simulationsumgebungen in eine partielle DATS-Zustandsraumdarstellung ermöglicht. Damit kann, wie anhand von Beispielen gezeigt werden konnte, die gleiche ASL-Spezifikation für Eigenschaften eines vollständigen diskreten Modells ohne Modifikation auch auf Simulationsergebnissen ausgewertet werden. Ein für das formale ASL-basierte Model Checking entwickelter Ansatz zur Erzeugung von Gegenbeispielen für als spezifikationsverletzend identifizierte Zustandsraumgebiete erlaubt es, Transitionsfolgen von einem definierten Startzustand zu einem spezifikationsverletzenden Zustand zu ermitteln. Auf Basis dieses Gegenbeispiel-Verfahrens wurde eine neue formale Eigenschaftsverifikationsmethodik mittels vollständig den Zustandsraum einer Schaltung abdeckenden Eingangsstimuli entwickelt. Die vollständig den Zustandsraum abdeckenden Eingangsstimuli bieten noch eine weitere Anwendungsmöglichkeit im Bereich des Äquivalenzvergleichs. Die im Rahmen dieser Arbeit entwickelte Methodik zum formalen Äquivalenzvergleich auf Basis der vollständig den Zustandsraum abdeckenden Eingangsstimuli ersetzt die anwenderdefinierten Eingangsstimuli durch die vollständig den Zustandsraum abdeckenden. So kann die Äquivalenz für jeden möglichen Zustand der zu vergleichenden Implementierungen anhand eines automatisierten Vergleichs der Simulationsergebnisse beider Implementierungen gezeigt werden. Um die Ergebnisse der neu eingeführten formalen Verifikationsmethodiken visuell zu untersuchen wurde ein Verfahren entwickelt, das den Zustandsraum und seine Dynamik mittels eines Partikel-Simulationsansatzes visualisiert. Da die Partikel über den gesamten Zustandsraum randomisiert verteilt werden und sich dann gemäß der Vektorfelddynamik fortbewegen, kann auch hier ein Einblick in das Systemverhalten gewonnen werden, der eine weitestgehend vollständige und somit formale Repräsentation des Zustandsraums bietet. Die prototypische Implementierung der im Rahmen dieser Arbeit entwickelten formalen Verifikationsmethodiken wurde auf zahlreiche Beispielschaltungen angewendet. Die Ergebnisse für die neuen Ansätze zur diskreten Modellierung, zur Spezifikation und zu Verifikationsalgorithmen analoger Schaltungen zeigen, dass die aus diesen Ansätzen erzeugten Verifikationsmethodiken erfolgreich auf komplexe Zustandsraumstrukturen angewendet werden können

Realizability of embedded controllers: from hybrid models to correct implementations

Un controller embedded \ue8 un dispositivo (ovvero, un'opportuna combinazione di componenti hardware e software) che, immerso in un ambiente dinamico, deve reagire alle variazioni ambientali in tempo reale. I controller embedded sono largamente adottati in molti contesti della vita moderna, dall'automotive all'avionica, dall'elettronica di consumo alle attrezzature mediche. La correttezza di tali controller \ue8 indubbiamente cruciale. Per la progettazione e per la verifica di un controller embedded, spesso sorge la necessit\ue0 di modellare un intero sistema che includa sia il controller, sia il suo ambiente circostante. La natura di tale sistema \ue8 ibrido. Esso, infatti, \ue8 ottenuto integrando processi ad eventi discreti (i.e., il controller) e processi a tempo continuo (i.e., l'ambiente). Sistemi di questo tipo sono chiamati cyber-physical (CPS) o sistemi ibridi. Le dinamiche di tali sistemi non possono essere rappresentati efficacemente utilizzando o solo un modello (i.e., rappresentazione) discreto o solo un modello continuo. Diversi tipi di modelli possono sono stati proposti per descrivere i sistemi ibridi. Questi si concentrano su obiettivi diversi: modelli dettagliati sono eccellenti per la simulazione del sistema, ma non sono adatti per la sua verifica; modelli meno dettagliati sono eccellenti per la verifica, ma non sono convenienti per i successivi passi di raffinamento richiesti per la progettazione del sistema, e cos\uec via. Tra tutti questi modelli, gli Automi Ibridi (HA) [8, 77] rappresentano il formalismo pi\uf9 efficace per la simulazione e la verifica di sistemi ibridi. In particolare, un automa ibrido rappresenta i processi ad eventi discreti per mezzo di macchine a stati finiti (FSM), mentre i processi a tempo continuo sono rappresentati mediante variabili "continue" la cui dinamica \ue8 specificata da equazioni differenziali ordinarie (ODE) o loro generalizzazioni (e.g., inclusioni differenziali). Sfortunatamente, a causa della loro particolare semantica, esistono diverse difficolt\ue0 nel raffinare un modello basato su automi ibridi in un modello realizzabile e, di conseguenza, esistono difficolt\ue0 nell'automatizzare il flusso di progettazione di sistemi ibridi a partire da automi ibridi. Gli automi ibridi, infatti, sono considerati dispositivi "perfetti e istantanei". Essi adottano una nozione di tempo e di variabili basata su insiemi "densi" (i.e., l'insieme dei numeri reali). Pertanto, gli automi ibridi possono valutare lo stato (i.e., i valori delle variabili) del sistema in ogni istante, ovvero in ogni infinitesimo di tempo, e con la massima precisione. Inoltre, sono in grado di eseguire computazioni o reagire ad eventi di sincronizzazione in modo istantaneo, andando a cambiare la modalit\ue0 di funzionamento del sistema senza alcun ritardo. Questi aspetti sono convenienti a livello di modellazione, ma nessun dispositivo hardware/software potrebbe implementare correttamente tali comportamenti, indipendentemente dalle sue prestazioni. In altre parole, il controller modellato potrebbe non essere implementabile, ovvero, esso potrebbe non essere realizzabile affatto. Questa tesi affronta questo problema proponendo una metodologia completa e gli strumenti necessari per derivare da modelli basati su automi ibridi, modelli realizzabili e le corrispondenti implementazioni corrette. In un modello realizzabile, il controller analizza lo stato del sistema ad istanti temporali discreti, tipicamente fissati dalla frequenza di clock del processore installato sul dispositivo che implementa il controller. Lo stato del sistema \ue8 dato dai valori delle variabili rilevati dai sensori. Questi valori vengono digitalizzati con precisione finita e propagati al controller che li elabora per decidere se cambiare la modalit\ue0 di funzionamento del sistema. In tal caso, il controller genera segnali che, una volta trasmessi agli attuatori, determineranno il cambiamento della modalit\ue0 di funzionamento del sistema. \uc8 necessario tener presente che i sensori e gli attuatori introducono ritardi che seppur limitati, non possono essere trascurati.An embedded controller is a reactive device (e.g., a suitable combination of hardware and software components) that is embedded in a dynamical environment and has to react to environment changes in real time. Embedded controllers are widely adopted in many contexts of modern life, from automotive to avionics, from consumer electronics to medical equipment. Noticeably, the correctness of such controllers is crucial. When designing and verifying an embedded controller, often the need arises to model the controller and also its surrounding environment. The nature of the obtained system is hybrid because of the inclusion of both discrete-event (i.e., controller) and continuous-time (i.e., environment) processes whose dynamics cannot be characterized faithfully using either a discrete or continuous model only. Systems of this kind are named cyber-physical (CPS) or hybrid systems. Different types of models may be used to describe hybrid systems and they focus on different objectives: detailed models are excellent for simulation but not suitable for verification, high-level models are excellent for verification but not convenient for refinement, and so forth. Among all these models, hybrid automata (HA) [8, 77] have been proposed as a powerful formalism for the design, simulation and verification of hybrid systems. In particular, a hybrid automaton represents discrete-event processes by means of finite state machines (FSM), whereas continuous-time processes are represented by using real-numbered variables whose dynamics is specified by (ordinary) differential equation (ODE) or their generalizations (e.g., differential inclusions). Unfortunately, when the high-level model of the hybrid system is a hybrid automaton, several difficulties should be solved in order to automate the refinement phase in the design flow, because of the classical semantics of hybrid automata. In fact, hybrid automata can be considered perfect and instantaneous devices. They adopt a notion of time and evaluation of continuous variables based on dense sets of values (usually R, i.e., Reals). Thus, they can sample the state (i.e., value assignments on variables) of the hybrid system at any instant in such a dense set R 650. Further, they are capable of instantaneously evaluating guard constraints or reacting to incoming events by performing changes in the operating mode of the hybrid system without any delay. While these aspects are convenient at the modeling level, any model of an embedded controller that relies for its correctness on such precision and instantaneity cannot be implemented by any hardware/software device, no matter how fast it is. In other words, the controller is un-realizable, i.e., un-implementable. This thesis proposes a complete methodology and a framework that allows to derive from hybrid automata proved correct in the hybrid domain, correct realizable models of embedded controllers and the related discrete implementations. In a realizable model, the controller samples the state of the environment at periodic discrete time instants which, typically, are fixed by the clock frequency of the processor implementing the controller. The state of the environment consists of the current values of the relevant variables as observed by the sensors. These values are digitized with finite precision and reported to the controller that may decide to switch the operating mode of the environment. In such a case, the controller generates suitable output signals that, once transmitted to the actuators, will effect the desired change in the operating mode. It is worth noting that the sensors will report the current values of the variables and the actuators will effect changes in the rates of evolution of the variables with bounded delays

Contracts for System Design

Systems design has become a key challenge and differentiating factor over the last decades for system companies. Aircrafts, trains, cars, plants, distributed telecommunication military or health care systems, and more, involve systems design as a critical step. Complexity has caused system design times and costs to go severely over budget so as to threaten the health of entire industrial sectors. Heuristic methods and standard practices do not seem to scale with complexity so that novel design methods and tools based on a strong theoretical foundation are sorely needed. Model-based design as well as other methodologies such as layered and compositional design have been used recently but a unified intellectual framework with a complete design flow supported by formal tools is still lacking albeit some attempts at this framework such as Platform-based Design have been successfully deployed. Recently an "orthogonal" approach has been proposed that can be applied to all methodologies proposed thus far to provide a rigorous scaffolding for verification, analysis and abstraction/refinement: contractbased design. Several results have been obtained in this domain but a unified treatment of the topic that can help in putting contract-based design in perspective is still missing. This paper intends to provide such treatment where contracts are precisely defined and characterized so that they can be used in design methodologies such as the ones mentioned above with no ambiguity. In addition, the paper provides an important link between interfaces and contracts to show similarities and correspondences. Examples of the use of contracts in design are provided as well as in depth analysis of existing literature.Cet article fait le point sur le concept de contrat pour la conception de systèmes. Les contrats que nous proposons portent, non seulement sur des propriétés de typage de leurs interfaces, mais incluent une description abstraite de comportements. Nous proposons une méta-théorie, ou, si l'on veut, une théorie générique des contrats, qui permet le développement séparé de sous-systèmes. Nous montrons que cette méta-théorie se spécialise en l'une ou l'autre des théories connues

Master of Science

thesisThis document describes an improved method of formal verification of complex analog/mixed-signal (AMS) circuits. Currently, in our LEMA tool, verification properties are encoded using labeled Petri net (LPN). These LPNs are generated manually, a tedious process that requires the user to have considerable familiarity with the tool. To eliminate this time-consuming process, our LEMA tool is extended to include a translator that converts properties written in a property specification language to LPNs. New methods are also implemented to separate the transient period from the stable output period, thus improving the generated model. Also, the current methodology generates the circuit models for the input values used during the simulation of the circuit. So, models generated for other control input values are not accurate. In this case, accuracy of the generated models is improved by using a linear abstraction method like interpolation