11,125 research outputs found
Standardization of surface potential measurements of graphene domains
We compare the three most commonly used scanning probe techniques to obtain a
reliable value of the work function in graphene domains of different thickness.
The surface potential (SP) of graphene is directly measured in Hall bar
geometry via a combination of electrical functional microscopy and spectroscopy
techniques, which enables calibrated work function measurements of graphene
domains with values ~4.55+/-0.02 eV and ~4.44+/-0.02eV for single- and
bi-layer, respectively. We demonstrate that frequency-modulated Kelvin probe
force microscopy (FM-KPFM) provides more accurate measurement of the SP than
amplitude-modulated (AM)-KPFM. The discrepancy between experimental results
obtained by different techniques is discussed. In addition, we use FM-KPFM for
contactless measurements of the specific components of the device resistance.
We show a strong non-Ohmic behavior of the electrode-graphene contact
resistance and extract the graphene channel resistivity
Improved micro-contact resistance model that considers material deformation, electron transport and thin film characteristics
This paper reports on an improved analytic model forpredicting micro-contact resistance needed for designing microelectro-mechanical systems (MEMS) switches. The originalmodel had two primary considerations: 1) contact materialdeformation (i.e. elastic, plastic, or elastic-plastic) and 2) effectivecontact area radius. The model also assumed that individual aspotswere close together and that their interactions weredependent on each other which led to using the single effective aspotcontact area model. This single effective area model wasused to determine specific electron transport regions (i.e. ballistic,quasi-ballistic, or diffusive) by comparing the effective radius andthe mean free path of an electron. Using this model required thatmicro-switch contact materials be deposited, during devicefabrication, with processes ensuring low surface roughness values(i.e. sputtered films). Sputtered thin film electric contacts,however, do not behave like bulk materials and the effects of thinfilm contacts and spreading resistance must be considered. Theimproved micro-contact resistance model accounts for the twoprimary considerations above, as well as, using thin film,sputtered, electric contact
Recommended from our members
Ultra-Low-Power Sensors and Receivers for IoT Applications
The combination of ultra-low power analog front-ends and CMOS-compatible transducers enable new applications, such as environmental monitors, household appliances, health trackers, etc. that are seamlessly integrated into our daily lives. Furthermore, wireless connectivity allows many of these sensors to operate both independently and collectively. These techniques collectively fulfil the recent surge of internet-of-things (IoT) applications that have the potential to fundamentally change daily life for millions of people.In this dissertation, the circuit and system design of wireless receivers and sensors is presented that explores the challenges of implementing long lifespan, high accuracy, and large coverage range IoT sensor networks. The first is a wake-up receiver (WuRX), which continuously monitors the RF environment to wake up a higher-power radio upon detection of a predetermined RF signature. This work both improves sensitivity and reduces power over prior art through a multi-faceted design featuring an impedance transformation network with large passive voltage gain, an active envelope detector with high input impedance to facilitate large passive voltage gain, a low-power precision comparator, and a low-leakage digital baseband correlator.Although pushing the prior WuRX performance boundary by orders of magnitude, the first work shows moderate sensitivity, inferior temperature robustness, and large area with external lumped components. Thus, the second work shows a miniaturized WuRX that is temperature-compensated, yet still consumes only nano-watt power and millimeter area while operating at 9 GHz. To further reduce the area, a global common-mode feedback is utilized across the envelope detector and baseband amplifier that eliminates the need for off-chip ac-coupling components. Multiple temperature-compensation techniques are proposed to maintain constant bandwidth of the signal path and constant clock frequency. Both WuRXs operate at 0.4 V supply, consume near-zero power and achieve ~-70 dBm sensitivity.Lastly, the first reported CMOS 2-in-1 relative humidity and temperature sensor is presented. A unified analog front-end interfaces on-chip transducers and converts the inputs into a frequency vis a high-linearity frequency-locked loop. An incomplete-settling switched-capacitor-based Wheatstone bridge is proposed to sense the inputs in a power-efficient fashion
The Role of Bulk Charge Transport Processes in Electrical Tree Formation and Breakdown Mechanisms in Epoxy Resins
Electrical treeing experiments have been conducted at different temperatures and levels of absorbed moisture in Araldite CY1311 epoxy resin samples above their glass transition temperature, i.e. when the resin was in a flexible state. The fractal dimension of the electrical trees obtained and the rate of tree growth were found to depend on the environmental factors: temperature and humidity. It has also been found that at certain levels of temperature and moisture absorbed in the samples, a transition occurs from electrical treeing degradation to breakdown by thermal runaway. Complementary investigations of the dielectric properties of the same epoxy resin system have revealed that a bulk quasi-dc (QDC) charge transport mechanism takes place above the glass transition temperature, and we show that the characteristic features of the dielectric response are related to the shape of the electrical treeing degradation and the transition to thermal breakdown. This is explained qualitatively through the effect of the bulk QDC charge transport process in modifying the local space charge electric field distribution
Characterization of PEM Electrolyzer and PEM Fuel Cell Stacks Using Electrochemical Impedance Spectroscopy
In order to compete with currently available hydrogen production technologies, proton exchange membrane (PEM) water electrolysis must be cost effective and efficient. Characterization of the PEM electrolyzer stack can provide better understanding of the processes at the electrode level and losses during the operation to help improve its energy efficiency, important understanding to shape future research and the optimization of stack designs.
PEM fuel cells have seen significant developments in recent years due to their capability as an efficient and environment friendly solution for energy conversion. Understanding the behavior of the PEM fuel cell stack at varying loads is vital for optimizing hybrid systems efficiency. Therefore, it is important to characterize all aspects of a fuel cell when it is running under realistic operating conditions.
Electrochemical impedance spectroscopy (EIS) is the sophisticated method to study the PEM cell behavior due to its electrochemical nature. Characterizing PEM cell stacks using EIS technique has a major advantage of differentiating between contributions of each process towards the overall performance of PEM cell stacks. The contributions of ohmic, kinetic and mass transport losses can be differentiated using EIS studies. A 1.2 kW PEM fuel cell and 6 kW PEM electrolyzer were characterized using this technique. Fuel cell EIS testing was accomplished using a frequency response analyzer (FRA) and programmable electronic DC load over a frequency range from 20 kHz to 50 mHz. EIS studies of 6 kW PEM electrolyzer were carried using the FRA, modified linear DC power supply and custom build current transformer core. The experimental impedance data were analyzed using Nyquist and Bode plots for different types of losses. Electrolyzer modeling was also done based on thermodynamic principles. Stack parameters such as membrane conductivity, anode and cathode exchange current densities were extracted using Mathematica from experimental data obtained at various temperatures.
Some aspects of hydrogen conditioning and compression are also addressed as a part of this study. A novel technique of hydrogen drying using thermoelectric coolers was developed and tested. Hydrogen compression using electrochemical cell was studied, mathematically modeled and compared with its counterpart mechanical compressor
Ferroelectric-like behaviour of melanin:humidity effect on current-voltage characteristics
The influence of low vacuum on quasistatic current-voltage (I–V) dependences and the impact of wet air pulse on dynamic bipolar I-V-loops and unipolar I-V-curves of fungal melanin thin layers have been studied for the first time. The threshold hysteresis voltages of I–V dependences are near to the standard electrode potentials of anodic water decomposition. Short wet air pulse impact leads to sharp increase of the current and appearance of “hump”-like and “knee”-like features of I-V-loops and I-V-curves, respectively. By treatment of I-V-loop allowing for I-V-curve shape the maxima of displacement current are revealed. The peculiarities of I-V-characteristics were modelled by series-parallel RC-circuit with Zener diodes as nonlinear elements. As a reason of appearance of temporal polar media with reversible ferroelectric-like polarization and ionic space charge transfer is considered the water-assisted dissociation of some ionic groups of melanin monomers that significantly influences electrophysical parameters of melanin nanostructures
- …