Data fusion strategy for precise vehicle location for intelligent self-aware maintenance systems

Abstract— Nowadays careful measurement applications are handed over to Wired and Wireless Sensor Network. Taking the scenario of train location as an example, this would lead to an increase in uncertainty about position related to sensors with long acquisition times like Balises, RFID and Transponders along the track. We take into account the data without any synchronization protocols, for increase the accuracy and reduce the uncertainty after the data fusion algorithms. The case studies, we have analysed, derived from the needs of the project partners: train localization, head of an auger in the drilling sector localization and the location of containers of radioactive material waste in a reprocessing nuclear plant. They have the necessity to plan the maintenance operations of their infrastructure basing through architecture that taking input from the sensors, which are localization and diagnosis, maps and cost, to optimize the cost effectiveness and reduce the time of operation

Bayesian Train Localization with Particle Filter, Loosely Coupled GNSS, IMU, and a Track Map

Train localization is safety-critical and therefore the approach requires a continuous availability and a track-selective accuracy. A probabilistic approach is followed up in order to cope with multiple sensors, measurement errors, imprecise information, and hidden variables as the topological position within the track network. The nonlinear estimation of the train localization posterior is addressed with a novel Rao-Blackwellized particle filter (RBPF) approach. There, embedded Kalman filters estimate certain linear state variables while the particle distribution can cope with the nonlinear cases of parallel tracks and switch scenarios. The train localization algorithmis further based on a trackmap andmeasurements froma GlobalNavigation Satellite System(GNSS) receiver and an inertial measurement unit (IMU). The GNSS integration is loosely coupled and the IMU integration is achieved without the common strapdown approach and suitable for low-cost IMUs.The implementation is evaluated with realmeasurements from a regional train at regular passenger service over 230 km of tracks with 107 split switches and parallel track scenarios of 58.5 km.The approach is analyzed with labeled data by means of ground truth of the traveled switch way. Track selectivity results reach 99.3% over parallel track scenarios and 97.2% of correctly resolved switch ways

Train Localisation using Wireless Sensor Networks

Safety and reliability have always been concerns for railway transportation. Knowing the exact location of a train enables the railway system to react to an unusual situation for the safety of human lives and properties. Generally, the accuracy of localisation systems is related with their deployment and maintenance costs, which can be on the order of millions of dollars a year. Despite a lot of research efforts, existing localisation systems based on different technologies are still limited because most of them either require expensive infrastructure (ultrasound and laser), have high database maintenance, computational costs or accumulate errors (vision), offer limited coverage (GPS-dark regions, Wi-Fi, RFID) or provide low accuracy (audible sound). On the other hand, wireless sensor networks (WSNs) offer the potential for a cheap, reliable and accurate solutions for the train localisation system. This thesis proposes a WSN-based train localisation system, in which train location is estimated based on the information gathered through the communication between the anchor sensors deployed along the track and the gateway sensor installed on the train, such as anchor sensors' geographic coordinates and the Received Signal Strength Indicator (RSSI). In the proposed system, timely anchor-gateway communication implies accurate localisation. How to guarantee effective communication between anchor sensors along the track and the gateway sensor on the train is a challenging problem for WSN-based train localisation. I propose a beacon driven sensors wake-up scheme (BWS) to address this problem. BWS allows each anchor sensor to run an asynchronous duty-cycling protocol to conserve energy and establishes an upper bound on the sleep time in one duty cycle to guarantee their timely wake-up once a train approaches. Simulation results show that the BWS scheme can timely wake up the anchor sensors at a very low energy consumption cost. To design an accurate scheme for train localisation, I conducted on-site experiments in an open field, a railway station and a tunnel, and the results show that RSSI can be used as an estimator for train localisation and its applicability increases with the incorporation of another type of data such as location information of anchor sensors. By combining the advantages of RSSI-based distance estimation and Particle Filtering techniques, I designed a Particle-Filter-based train localisation scheme and propose a novel Weighted RSSI Likelihood Function (WRLF) for particle update. The proposed localisation scheme is evaluated through extensive simulations using the data obtained from the on-site measurements. Simulation results demonstrate that the proposed scheme can achieve significant accuracy, where average localisation error stays under 30 cm at the train speed of 40 m=s, 40% anchor sensors failure rate and sparse deployment. In addition, the proposed train localisation scheme is robust to changes in train speed, the deployment density and reliability of anchor sensors. Anchor sensors are prone to hardware and software deterioration such as battery outage and dislocation. Therefore, in order to reduce the negative impacts of these problems, I designed a novel Consensus-based Anchor sensor Management Scheme (CAMS), in which each anchor sensor performs a self-diagnostics and reports the detected faults in the neighbourhood. CAMS can assist the gateway sensor to exclude the input from the faulty anchor sensors. In CAMS, anchor sensors update each other about their opinions on other neighbours and develops consensus to mark faulty sensors. In addition, CAMS also reports the system information such as signal path loss ratio and allows anchor sensors to re-calibrate and verify their geographic coordinates. CAMS is evaluated through extensive simulations based on real data collected from field experiments. This evaluation also incorporated the simulated node failure model in simulations. Though there are no existing WSN-based train localisation systems available to directly compare our results with, the proposed schemes are evaluated with real datasets, theoretical models and existing work wherever it was possible. Overall, the WSN-based train localisation system enables the use of RSSI, with combination of location coordinates of anchor sensors, as location estimator. Due to low cost of sensor devices, the cost of overall system remains low. Further, with duty-cycling operation, energy of the sensor nodes and system is conserved

HETEROGENEOUS MULTI-SENSOR FUSION FOR 2D AND 3D POSE ESTIMATION

Sensor fusion is a process in which data from different sensors is combined to acquire an output that cannot be obtained from individual sensors. This dissertation first considers a 2D image level real world problem from rail industry and proposes a novel solution using sensor fusion, then proceeds further to the more complicated 3D problem of multi sensor fusion for UAV pose estimation. One of the most important safety-related tasks in the rail industry is an early detection of defective rolling stock components. Railway wheels and wheel bearings are two components prone to damage due to their interactions with the brakes and railway track, which makes them a high priority when rail industry investigates improvements to current detection processes. The main contribution of this dissertation in this area is development of a computer vision method for automatically detecting the defective wheels that can potentially become a replacement for the current manual inspection procedure. The algorithm fuses images taken by wayside thermal and vision cameras and uses the outcome for the wheel defect detection. As a byproduct, the process will also include a method for detecting hot bearings from the same images. We evaluate our algorithm using simulated and real data images from UPRR in North America and it will be shown in this dissertation that using sensor fusion techniques the accuracy of the malfunction detection can be improved. After the 2D application, the more complicated 3D application is addressed. Precise, robust and consistent localization is an important subject in many areas of science such as vision-based control, path planning, and SLAM. Each of different sensors employed to estimate the pose have their strengths and weaknesses. Sensor fusion is a known approach that combines the data measured by different sensors to achieve a more accurate or complete pose estimation and to cope with sensor outages. In this dissertation, a new approach to 3D pose estimation for a UAV in an unknown GPS-denied environment is presented. The proposed algorithm fuses the data from an IMU, a camera, and a 2D LiDAR to achieve accurate localization. Among the employed sensors, LiDAR has not received proper attention in the past; mostly because a 2D LiDAR can only provide pose estimation in its scanning plane and thus it cannot obtain full pose estimation in a 3D environment. A novel method is introduced in this research that enables us to employ a 2D LiDAR to improve the full 3D pose estimation accuracy acquired from an IMU and a camera. To the best of our knowledge 2D LiDAR has never been employed for 3D localization without a prior map and it is shown in this dissertation that our method can significantly improve the precision of the localization algorithm. The proposed approach is evaluated and justified by simulation and real world experiments

A review of laser scanning for geological and geotechnical applications in underground mining

Laser scanning can provide timely assessments of mine sites despite adverse challenges in the operational environment. Although there are several published articles on laser scanning, there is a need to review them in the context of underground mining applications. To this end, a holistic review of laser scanning is presented including progress in 3D scanning systems, data capture/processing techniques and primary applications in underground mines. Laser scanning technology has advanced significantly in terms of mobility and mapping, but there are constraints in coherent and consistent data collection at certain mines due to feature deficiency, dynamics, and environmental influences such as dust and water. Studies suggest that laser scanning has matured over the years for change detection, clearance measurements and structure mapping applications. However, there is scope for improvements in lithology identification, surface parameter measurements, logistic tracking and autonomous navigation. Laser scanning has the potential to provide real-time solutions but the lack of infrastructure in underground mines for data transfer, geodetic networking and processing capacity remain limiting factors. Nevertheless, laser scanners are becoming an integral part of mine automation thanks to their affordability, accuracy and mobility, which should support their widespread usage in years to come

Mobile laser scanning based determination of railway network topology and branching direction on turnouts

GNSS is often inaccurate and satellite signals are not always available, which results in ambiguous situations. In order to reduce their negative effects on train-borne localization, this work proposes an approach for the detection of tracks, turnouts, and branching directions solely from 2d lidar sensor measurements. The experimental evaluation shows highly correct and complete results. In summary, these detections are sufficient to reduce ambiguity problems in train-borne localization

Multisensor navigation systems: a remedy for GNSS vulnerabilities?

Space-based positioning, navigation, and timing (PNT) technologies, such as the global navigation satellite systems (GNSS) provide position, velocity, and timing information to an unlimited number of users around the world. In recent years, PNT information has become increasingly critical to the security, safety, and prosperity of the World's population, and is now widely recognized as an essential element of the global information infrastructure. Due to its vulnerabilities and line-of-sight requirements, GNSS alone is unable to provide PNT with the required levels of integrity, accuracy, continuity, and reliability. A multisensor navigation approach offers an effective augmentation in GNSS-challenged environments that holds a promise of delivering robust and resilient PNT. Traditionally, sensors such as inertial measurement units (IMUs), barometers, magnetometers, odometers, and digital compasses, have been used. However, recent trends have largely focused on image-based, terrain-based and collaborative navigation to recover the user location. This paper offers a review of the technological advances that have taken place in PNT over the last two decades, and discusses various hybridizations of multisensory systems, building upon the fundamental GNSS/IMU integration. The most important conclusion of this study is that in order to meet the challenging goals of delivering continuous, accurate and robust PNT to the ever-growing numbers of users, the hybridization of a suite of different PNT solutions is required

Location estimation and collective inference in indoor spaces using smartphones

In the last decade, indoor localization-based smart, innovative services have become very popular in public spaces (retail spaces, malls, museums, and warehouses). We have state-of-art RSSI techniques to more accurate CSI techniques to infer indoor location. Since the past year, the pandemic has raised an important challenge of determining if a pair of individuals are ``social-distancing,'' separated by more than 6ft. Most solutions have used `presence'-if one device can hear another--- which is a poor proxy for distance since devices can be heard well beyond 6 ft social distancing radius and across aisles and walls. Here we ask the key question: what needs to be added to our current indoor localization solutions to deploy them towards scenarios like reliable contact tracing solutions easily. And we identified three main limitations---deployability, accuracy, and privacy. Location solutions need to deploy on ubiquitous devices like smartphones. They should be accurate under different environmental conditions. The solutions need to respect a person's privacy settings. Our main contributions are twofold -a new statistical feature for localization, Packet Reception Probability (PRP) which correlates with distance and is different from other physical measures of distance like CSI or RSSI. PRP can easily deploy on smartphones (unlike CSI) and is more accurate than RSSI. Second, we develop a crowd tool to audit the level of location surveillance in space which is the first step towards achieving privacy. Specifically, we first solve a location estimation problem with the help of infrastructure devices (mainly Bluetooth Low Energy or BLE devices). BLE has turned out to be a key contact tracing technology during the pandemic. We have identified three fundamental limitations with BLE RSSI---biased RSSI Estimates due to packet loss, mean RSSI de-correlated with distance due to high packet loss in BLE, and well-known multipath effects. We built the new localization feature, Packet Reception Probability (PRP), to solve the packet loss problem in RSSI. PRP measures the probability that a receiver successfully receives packets from the transmitter. We have shown through empirical experiments that PRP encodes distance. We also incorporated a new stack-based model of multipath in our framework. We have evaluated B-PRP in two real-world public places, an academic library setting and a real-world retail store. PRP gives significantly lower errors than RSSI. Fusion of PRP and RSSI further improves the overall localization accuracy over PRP. Next, we solved a peer-to-peer distance estimation problem that uses minimal infrastructure. Most apps like aarogya setu, bluetrace have solved peer-to-peer distances through the presence of Bluetooth Low-Energy (BLE) signals. Apps that rely on pairwise measurements like RSSI suffer from latent factors like device relative positioning on the human body, the orientation of the people carrying the devices, and the environmental multipath effect. We have proposed two solutions in this work---using known distances and collaboration to solve distances more robustly. First, if we have a few infrastructure devices installed at known locations in an environment, we can make more measurements with the devices. We can also use the known distances between the devices to constrain the unknown distances in a triangle inequality framework. Second, in an outdoor environment where we cannot install infrastructure devices, we can collaborate between people to jointly constrain many unknown distances. Finally, we solve a collaborative tracking estimation problem where people audit the properties of localization infrastructure. While people want services, they do not want to be surveilled. Further, people using an indoor location system do not know the current surveillance level. The granularity of the location information that the system collects about people depends on the nature of the infrastructure. Our system, the CrowdEstimator, provides a tool to people to harness their collective power and collect traces for inferring the level of surveillance. We further propose the insight that surveillance is not a single number, instead of a spatial map. We introduce active learning algorithms to infer all parts of the spatial map with uniform accuracy. Auditing the location infrastructure is the first step towards achieving the bigger goal of declarative privacy, where a person can specify their comfortable level of surveillance

New Approach of Indoor and Outdoor Localization Systems

Accurate determination of the mobile position constitutes the basis of many new applications. This book provides a detailed account of wireless systems for positioning, signal processing, radio localization techniques (Time Difference Of Arrival), performances evaluation, and localization applications. The first section is dedicated to Satellite systems for positioning like GPS, GNSS. The second section addresses the localization applications using the wireless sensor networks. Some techniques are introduced for localization systems, especially for indoor positioning, such as Ultra Wide Band (UWB), WIFI. The last section is dedicated to Coupled GPS and other sensors. Some results of simulations, implementation and tests are given to help readers grasp the presented techniques. This is an ideal book for students, PhD students, academics and engineers in the field of Communication, localization & Signal Processing, especially in indoor and outdoor localization domains