Describing Robotic Bat Flight with Stable Periodic Orbits

From a dynamic system point of view, bat locomotion stands out among other forms of flight. During a large part of bat wingbeat cycle the moving body is not in a static equilibrium. This is in sharp contrast to what we observe in other simpler forms of flight such as insects, which stay at their static equilibrium. Encouraged by biological examinations that have revealed bats exhibit periodic and stable limit cycles, this work demonstrates that one effective approach to stabilize articulated flying robots with bat morphology is locating feasible limit cycles for these robots; then, designing controllers that retain the closed-loop system trajectories within a bounded neighborhood of the designed periodic orbits. This control design paradigm has been evaluated in practice on a recently developed bio-inspired robot called Bat Bot (B2)

Reducing Versatile Bat Wing Conformations to a 1-DoF Machine

Recent works have shown success in mimicking the flapping flight of bats on the robotic platform Bat Bot (B2). This robot has only five actuators but retains the ability to flap and fold-unfold its wings in flight. However, this bat-like robot has been unable to perform folding-unfolding of its wings within the period of a wingbeat cycle, about 100 ms. The DC motors operating the spindle mechanisms cannot attain this folding speed. Biological bats rely on this periodic folding of their wings during the upstroke of the wingbeat cycle. It reduces the moment of inertia of the wings and limits the negative lift generated during the upstroke. Thus, we consider it important to achieve wing folding during the upstroke. A mechanism was designed to couple the flapping cycle to the folding cycle of the robot. We then use biological data to further optimize the mechanism such that the kinematic synergies of the robot best match those of a biological bat. This ensures that folding is performed at the correct point in the wingbeat cycle

Optimizing the structure and movement of a robotic bat with biological kinematic synergies

In this article, we present methods to optimize the design and flight characteristics of a biologically inspired bat-like robot. In previous, work we have designed the topological structure for the wing kinematics of this robot; here we present methods to optimize the geometry of this structure, and to compute actuator trajectories such that its wingbeat pattern closely matches biological counterparts. Our approach is motivated by recent studies on biological bat flight that have shown that the salient aspects of wing motion can be accurately represented in a low-dimensional space. Although bats have over 40 degrees of freedom (DoFs), our robot possesses several biologically meaningful morphing specializations. We use principal component analysis (PCA) to characterize the two most dominant modes of biological bat flight kinematics, and we optimize our robot’s parametric kinematics to mimic these. The method yields a robot that is reduced from five degrees of actuation (DoAs) to just three, and that actively folds its wings within a wingbeat period. As a result of mimicking synergies, the robot produces an average net lift improvesment of 89% over the same robot when its wings cannot fold

From Rousettus aegyptiacus (bat) Landing to Robotic Landing: Regulation of CG-CP Distance Using a Nonlinear Closed-Loop Feedback

Bats are unique in that they can achieve unrivaled agile maneuvers due to their functionally versatile wing conformations. Among these maneuvers, roosting (landing) has captured attentions because bats perform this acrobatic maneuver with a great composure. This work attempts to reconstruct bat landing maneuvers with a Micro Aerial Vehicle (MAV) called Allice. Allice is capable of adjusting the position of its Center of Gravity (CG) with respect to the Center of Pressure (CP) using a nonlinear closed-loop feedback. This nonlinear control law, which is based on the method of input-output feedback linearization, enables attitude regulations through variations in CG-CP distance. To design the model-based nonlinear controller, the Newton-Euler dynamic model of the robot is considered, in which the aerodynamic coefficients of lift and drag are obtained experimentally. The performance of the proposed control architecture is validated by conducting several experiments

Integration of Polyimide Flexible PCB Wings in Northeastern Aerobat

The principal aim of this Master's thesis is to propel the optimization of the membrane wing structure of the Northeastern Aerobat through origami techniques and enhancing its capacity for secure hovering within confined spaces. Bio-inspired drones offer distinctive capabilities that pave the way for innovative applications, encompassing wildlife monitoring, precision agriculture, search and rescue operations, as well as the augmentation of residential safety. The evolved noise-reduction mechanisms of birds and insects prove advantageous for drones utilized in tasks like surveillance and wildlife observation, ensuring operation devoid of disturbances. Traditional flying drones equipped with rotary or fixed wings encounter notable constraints when navigating narrow pathways. While rotary and fixed-wing systems are conventionally harnessed for surveillance and reconnaissance, the integration of onboard sensor suites within micro aerial vehicles (MAVs) has garnered interest in vigilantly monitoring hazardous scenarios in residential settings. Notwithstanding the agility and commendable fault tolerance exhibited by systems such as quadrotors in demanding conditions, their inflexible body structures impede collision tolerance, necessitating operational spaces free of collisions. Recent years have witnessed an upsurge in integrating soft and pliable materials into the design of such systems; however, the pursuit of aerodynamic efficiency curtails the utilization of excessively flexible materials for rotor blades or propellers. This thesis introduces a design that integrates polyimide flexible PCBs into the wings of the Aerobat and employs guard design incorporating feedback-driven stabilizers, enabling stable hovering flights within Northeastern's Robotics-Inspired Study and Experimentation (RISE) cage.Comment: 42 pages,20 figure

Wake-Based Locomotion Gait Design for Aerobat

Flying animals, such as bats, fly through their fluidic environment as they create air jets and form wake structures downstream of their flight path. Bats, in particular, dynamically morph their highly flexible and dexterous armwing to manipulate their fluidic environment which is key to their agility and flight efficiency. This paper presents the theoretical and numerical analysis of the wake-structure-based gait design inspired by bat flight for flapping robots using the notion of reduced-order models and unsteady aerodynamic model incorporating Wagner function. The objective of this paper is to introduce the notion of gait design for flapping robots by systematically searching the design space in the context of optimization. The solution found using our gait design framework was used to design and test a flapping robot

Optimizing the structure and movement of a robotic bat with biological kinematic synergies

In this article, we present methods to optimize the design and flight characteristics of a biologically inspired bat-like robot. In previous, work we have designed the topological structure for the wing kinematics of this robot; here we present methods to optimize the geometry of this structure, and to compute actuator trajectories such that its wingbeat pattern closely matches biological counterparts. Our approach is motivated by recent studies on biological bat flight that have shown that the salient aspects of wing motion can be accurately represented in a low-dimensional space. Although bats have over 40 degrees of freedom (DoFs), our robot possesses several biologically meaningful morphing specializations. We use principal component analysis (PCA) to characterize the two most dominant modes of biological bat flight kinematics, and we optimize our robot’s parametric kinematics to mimic these. The method yields a robot that is reduced from five degrees of actuation (DoAs) to just three, and that actively folds its wings within a wingbeat period. As a result of mimicking synergies, the robot produces an average net lift improvesment of 89% over the same robot when its wings cannot fold

Optimizing the structure and movement of a robotic bat with biological kinematic synergies

In this thesis we present methods to optimize the design and flight characteristics of a biologically-inspired bat-like robot. Recent work has designed the topological structure for the wing kinematics of this robot; here we present methods to optimize the geometry of this structure, and to compute actuator trajectories that yield successful flight behaviors. Our approach is motivated by recent studies on biological bat flight, which have shown that the salient aspects of wing motion can be accurately represented in a low-dimensional space. We use principal components analysis (PCA) to characterize the dominant modes of biological bat flight kinematics, and optimize our robotic design to mimic these. In particular, we use the first and second principal components to shape the parametric kinematics and actuator trajectories through finite state nonlinear constrained optimization. The method yields a robot mechanism that, despite having only five degrees of actuation, possesses several biologically meaningful morphing specializations. We have validated our approach in both simulation and flight experiments with our prototype robotic bat

Winged Aerial Robot: Modular Design Approach

This paper presents the design, modelling, control, and experimental validation of a novel flapping wing aerial robot built with servo actuators that could be applied in search, rescue, and assistance to injured people. The proposed concept design is intended to facilitate the construction of this kind of aerial robots following a modular and reconfigurable approach, consisting of a series of Servo-Flapping Engine (SFE) modules attached to the carbon fibre tube used as fuselage, and a tail servo, covering the structure with a light nylon cloth. The SFE modules are built with a pair of servos that rotate the wing rods with desired amplitude, frequency, and relative phase. Combining two SFE modules, it is possible to generate different flapping patterns and control the orientation of the aerodynamic surfaces. The paper covers the parametrization of the design, the hardware/software implementation, as well as the modelling and control. The proposed design is validated through gliding and flapping tests in an outdoor environment.Comisión Europea - ERC Advanced Grant GRIFFIN Action 788247Comisión Europea - Proyecto AERIAL-CORE H2020-2019-87147