Interoperability of wireless communication technologies in hybrid networks: Evaluation of end-to-end interoperability issues and quality of service requirements

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues. The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies). The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks. Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications. The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way. The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools. This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks. Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research. It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites. The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation

Interoperability of wireless communication technologies in hybrid networks : evaluation of end-to-end interoperability issues and quality of service requirements

Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues. The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies). The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks. Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications. The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way. The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools. This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks. Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research. It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites. The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

An Introduction to Computer Networks

An open textbook for undergraduate and graduate courses on computer networks

A novel multimedia adaptation architecture and congestion control mechanism designed for real-time interactive applications

PhDThe increasing use of interactive multimedia applications over the Internet has created a problem of congestion. This is because a majority of these applications do not respond to congestion indicators. This leads to resource starvation for responsive flows, and ultimately excessive delay and losses for all flows therefore loss of quality. This results in unfair sharing of network resources and increasing the risk of network ‘congestion collapse’. Current Congestion Control Mechanisms such as ‘TCP-Friendly Rate Control’ (TFRC) have been able to achieve ‘fair-share’ of network resource when competing with responsive flows such as TCP, but TFRC’s method of congestion response (i.e. to reduce Packet Rate) is not ideally matched for interactive multimedia applications which maintain a fixed Frame Rate. This mismatch of the two rates (Packet Rate and Frame Rate) leads to buffering of frames at the Sender Buffer resulting in delay and loss, and an unacceptable reduction of quality or complete loss of service for the end-user. To address this issue, this thesis proposes a novel Congestion Control Mechanism which is referred to as ‘TCP-friendly rate control – Fine Grain Scalable’ (TFGS) for interactive multimedia applications. This new approach allows multimedia frames (data) to be sent as soon as they are generated, so that the multimedia frames can reach the destination as quickly as possible, in order to provide an isochronous interactive service. This is done by maintaining the Packet Rate of the Congestion Control Mechanism (CCM) at a level equivalent to the Frame Rate of the Multimedia Encoder.The response to congestion is to truncate the Packet Size, hence reducing the overall bitrate of the multimedia stream. This functionality of the Congestion Control Mechanism is referred to as Packet Size Truncation (PST), and takes advantage of adaptive multimedia encoding, such as Fine Grain Scalable (FGS), where the multimedia frame is encoded in order of significance, Most to Least Significant Bits. The Multimedia Adaptation Manager (MAM) truncates the multimedia frame to the size indicated by the Packet Size Truncation function of the CCM, accurately mapping user demand to available network resource. Additionally Fine Grain Scalable encoding can offer scalability at byte level granularity, providing a true match to available network resources. This approach has the benefits of achieving a ‘fair-share’ of network resource when competing with responsive flows (as similar to TFRC CCM), but it also provides an isochronous service which is of crucial benefit to real-time interactive services. Furthermore, results illustrate that an increased number of interactive multimedia flows (such as voice) can be carried over congested networks whilst maintaining a quality level equivalent to that of a standard landline telephone. This is because the loss and delay arising from the buffering of frames at the Sender Buffer is completely removed. Packets sent maintain a fixed inter-packet-gap-spacing (IPGS). This results in a majority of packets arriving at the receiving end at tight time intervals. Hence, this avoids the need of using large Playout (de-jitter) Buffer sizes and adaptive Playout Buffer configurations. As a result this reduces delay, improves interactivity and Quality of Experience (QoE) of the multimedia application

Journal of Telecommunications and Information Technology, nr 3

kwartalni

Best effort QoS support routing in mobile ad hoc networks

In the past decades, mobile traffic generated by devices such as smartphones, iphones, laptops and mobile gateways has been growing rapidly. While traditional direct connection techniques evolve to provide better access to the Internet, a new type of wireless network, mobile ad hoc network (MANET), has emerged. A MANET differs from a direct connection network in the way that it is multi-hopping and self-organizing and thus able to operate without the help of prefixed infrastructures. However, challenges such dynamic topology, unreliable wireless links and resource constraints impede the wide applications of MANETs. Routing in a MANET is complex because it has to react efficiently to unfavourable conditions and support traditional IP services. In addition, Quality of Service (QoS) provision is required to support the rapid growth of video in mobile traffic. As a consequence, tremendous efforts have been devoted to the design of QoS routing in MANETs, leading to the emergence of a number of QoS support techniques. However, the application independent nature of QoS routing protocols results in the absence of a one-for-all solution for MANETs. Meanwhile, the relative importance of QoS metrics in real applications is not considered in many studies. A Best Effort QoS support (BEQoS) routing model which evaluates and ranks alternative routing protocols by considering the relative importance of multiple QoS metrics is proposed in this thesis. BEQoS has two algorithms, SAW-AHP and FPP for different scenarios. The former is suitable for cases where uncertainty factors such as standard deviation can be neglected while the latter considers uncertainty of the problems. SAW-AHP is a combination of Simple Additive Weighting and Analytic Hierarchical Process in which the decision maker or network operator is firstly required to assign his/her preference of metrics with a specific number according to given rules. The comparison matrices are composed accordingly, based on which the synthetic weights for alternatives are gained. The one with the highest weight is the optimal protocol among all alternatives. The reliability and efficiency of SAW-AHP are validated through simulations. An integrated architecture, using evaluation results of SAW-AHP is proposed which incorporates the ad hoc technology into the existing WLAN and therefore provides a solution for the last mile access problems. The protocol selection induced cost and gains are also discussed. The thesis concludes by describing the potential application area of the proposed method. Fuzzy SAW-AHP is extended to accommodate the vagueness of the decision maker and complexity of problems such as standard deviation in simulations. The fuzzy triangular numbers are used to substitute the crisp numbers in comparison matrices in traditional AHP. Fuzzy Preference Programming (FPP) is employed to obtain the crisp synthetic weight for alternatives based on which they are ranked. The reliability and efficiency of SAW-FPP are demonstrated by simulations

Syringa Networks v. Idaho Department of Administration Clerk\u27s Record v. 1 Dckt. 38735

https://digitalcommons.law.uidaho.edu/idaho_supreme_court_record_briefs/1519/thumbnail.jp

Federal Register

Daily publication of the U.S. Office of the Federal Register contains rules and regulations, proposed legislation and rule changes, and other notices, including "Presidential proclamations and Executive Orders, Federal agency documents having general applicability and legal effect, documents required to be published by act of Congress, and other Federal agency documents of public interest" (p. ii). Table of Contents starts on page iii