Spectrum-sharing method for co-existence between 5G OFDM-based system and fixed service

This study investigates the co-existence of fifth generation (5G) mobile communication systems and fixed service (FS) in the 28-GHz band through the utilization and modification of an existing spectrum-sharing method known as the advanced minimum coupling loss (A-MCL) model. The proposed model is based on the power spectral density (PSD) overlap between the 5G orthogonal frequency-division multiplexing (OFDM)-based system and the FS. Spectrum-sharing studies typically need 5G parameters, such as the spectrum emission mask (SEM); however, no such information is available for the new system to achieve accurate results. The proposed model is suitable for spectrum-sharing studies between 5G and other wireless systems without the need for the 5G SEM. Moreover, the existing model is implemented in a new application (i.e., 5G) in the 28-GHz band with different 5G bandwidths. Furthermore, the FS parameters and its frequency allocation are selected based on the Canadian standards to obtain preliminary results for the co-existence between the 5G system and the FS. Results show that co-existence is feasible when certain distances are applied, especially with higher 5G bandwidths (such as 0.5 and 1 GHz) when the 5G system acts as an interferer. In addition, the antenna position plays a major role in reducing the required separation distances between the victim receiver and the interfering transmitter. This model can be used for any future mobile generation such as the sixth generation (6G) mobile system if its PSD is known. This study is concurrent with the worldwide spectrum-sharing studies requested by the International Telecommunication Union for WRC-19

5G: 2020 and Beyond

The future society would be ushered in a new communication era with the emergence of 5G. 5G would be significantly different, especially, in terms of architecture and operation in comparison with the previous communication generations (4G, 3G...). This book discusses the various aspects of the architecture, operation, possible challenges, and mechanisms to overcome them. Further, it supports users? interac- tion through communication devices relying on Human Bond Communication and COmmunication-NAvigation- SENsing- SErvices (CONASENSE).Topics broadly covered in this book are; • Wireless Innovative System for Dynamically Operating Mega Communications (WISDOM)• Millimeter Waves and Spectrum Management• Cyber Security• Device to Device Communicatio

5G: 2020 and Beyond

The future society would be ushered in a new communication era with the emergence of 5G. 5G would be significantly different, especially, in terms of architecture and operation in comparison with the previous communication generations (4G, 3G...). This book discusses the various aspects of the architecture, operation, possible challenges, and mechanisms to overcome them. Further, it supports users? interac- tion through communication devices relying on Human Bond Communication and COmmunication-NAvigation- SENsing- SErvices (CONASENSE).Topics broadly covered in this book are; • Wireless Innovative System for Dynamically Operating Mega Communications (WISDOM)• Millimeter Waves and Spectrum Management• Cyber Security• Device to Device Communicatio

Técnicas de quantização para sistemas de comunicação híbridos na banda de ondas milimétricas com um número elevado de antenas

Since the appearance of mobile communications, the users of this technology have been growing exponentially every day. The escalating mobile traffic growth it has been imposed by the proliferation of smartphones and tablets. The increasing and more intensive use of wireless communications may lead to a future breaking point, where the traditional systems will fail to support the required capability, spectral and energy efficiency. On the other hand, to cover all this current need to have more and more data it is necessary to provide a new range of data rates around the gigabits per second. Today, almost all mobile communications systems use spectrum in the range of 300MHz – 3GHz. It is needed to start looking to the range of 3GHz – 300GHz spectrum for mobile broadband applications. Millimeter waves are one way to alleviate the spectrum gridlock at lower frequencies. MIMO based systems has been researched for the last 20 years and are now part of the current standards. However, to achieve more gains, a grander view of the MIMO concept envisions the use of a large scale of antennas at each base stations, a concept referred as massive MIMO. The symbiotic combination of these technologies and other ones will lead to the development of a new generation system known as the 5G. The knowledge of the channel state information at the transmitter is very important in real massive MIMO millimeter wave systems. In this dissertation a limited feedback strategy for a hybrid massive MIMO OFDM system is proposed, where only a part of the parameters associated to the link channel are quantized and fed back. The limited feedback strategy employs a uniform-based quantization for channel amplitudes, angle of departure and angle of arrival in time domain. After being fed back, this information is used to reconstruct the overall channel in frequency domain and the transmit antenna array, which are then used to compute the hybrid analog-digital precoders. Numerical results show that the proposed quantization strategy achieve a performance close to the one obtained with perfect full channel, with a low overhead and complexityDesde o aparecimento das comunicações móveis, os utilizadores desta tecnologia têm vindo a crescer exponencialmente todos os dias. A escalada do crescimento do tráfego móvel foi imposta, principalmente, pela proliferação de smartphones e tablets. O uso crescente e intensivo das comunicações sem fios pode levar no futuro a um ponto de rutura, onde os sistemas tradicionais não suportam a capacidade requerida, a eficiência espectral e eficiência enérgica. Por outro lado, para cobrir toda esta necessidade atual de ter mais e mais dados, é necessário fornecer taxas de transmissão mais elevadas, em torno dos gigabits por segundo. Hoje, quase todos os sistemas de comunicações móveis usam espectro na faixa de 300 MHz - 3GHz. É necessário começar a procurar a gama de espectro 3GHz - 300 GHz para aplicações de banda larga móvel. Aqui vamos apresentar as ondas milimétricas, sendo esta uma maneira de aliviar espectro em frequências mais baixas. Os sistemas baseados em MIMO foram alvo de pesquisa nos últimos 20 anos e agora fazem parte dos padrões atuais. No entanto, para obter mais ganhos, uma visão mais ampla do conceito MIMO prevê o uso de uma grande quantidade de antenas em cada estação base, um conceito referido como massive MIMO. A combinação simbiótica destas tecnologias levará ao desenvolvimento de um novo sistema de geração denominado 5G. O desenvolvimento de técnicas de conhecimento da informação do canal no transmissor é muito importante em sistemas massive MIMO millimeter wave reais. Nesta dissertação é proposta e avaliada uma estratégia de envio de informação de canal para o transmissor para sistemas massive MIMO OFDM híbrido, onde apenas uma parte dos parâmetros associados ao canal são quantificados e transmitidos para o transmissor. A estratégia de feedback proposta é baseada numa quantização uniforme das amplitudes de canal, ângulos de partida e de chegada, no domínio do tempo. Depois de serem enviadas, essas informações são usadas para reconstruir o canal geral no domínio da frequência e a matriz da antena de transmissão, que são então usadas para obter os precoders híbridos analógico-digitais. Os resultados numéricos mostram que a estratégia de quantificação proposta atinge um desempenho próximo ao obtido caso se conhecesse o canal perfeito no transmissor, com um baixo overhead e complexidadeMestrado em Engenharia Eletrónica e Telecomunicaçõe

Enabling Millimeter Wave Communication for 5G Cellular Networks: MAC-layer Perspective

Data traffic among mobile devices increases dramatically with emerging high-speed multimedia applications such as uncompressed video streaming. Many new applications beyond personal communications involve tens or even hundreds of billions wireless devices, such as wireless watch, e-health sensors, and wireless glass. The number of wireless devices and the data rates will continue to grow exponentially. Quantitative evidences forecast that total data rate by 2020 will be 1000 times of current 4G data rate. Next generation wireless networks need fundamental changes to satisfy the overwhelming capacity demands. Millimeter wave (mmWave) communication with huge available bandwidth is a very promising solution for next generation wireless networks to overcome the global bandwidth shortage at saturated microwave spectrum. The large available bandwidth can be directly translated into high capacity. mmWave communication has several propagation characteristics including strong pathloss, atmospheric and rain absorption, low diffraction around obstacles and penetration through objects. These propagation characteristics create challenges for next generation wireless networks to support various kinds of emerging applications with different QoS requirements. Our research focuses on how to effectively and efficiently exploit the large available mmWave bandwidth to achieve high capacity demand while overcoming these challenges on QoS provisioning for various kinds of applications. This thesis focuses on MAC protocol design and analysis for mmWave communication to provide required capacity and QoS to support various kinds of applications in next generation wireless networks. Specifically, from the transmitter/receiver perspective, multi-user beamforming based on codebook is conducted to determine best transmission/reception beams to increase network capacity considering the mutual interferences among concurrent links. From the channel perspective, both interfering and non-interfering concurrent links are scheduled to operate simultaneously to exploit spatial reuse and improve network capacity. Link outage problem resulting from the limited diffraction capability and low penetration capability of mmWave band is addressed for quality provisioning by enabling multi-hop transmission to replace the link in outage (for low-mobility scenarios) and buffer design with dynamic bandwidth allocation among all the users in the whole coverage area (for high-mobility scenarios). From the system perspective, system structure, network architecture, and candidate MAC are investigated and novel backoff mechanism for CSMA/CA is proposed to give more transmission opportunity to faraway nodes than nearby nodes in order to achieve better fairness and higher network capacity. In this thesis, we formulate each problem mentioned above as an optimization problem with the proposed algorithms to solve it. Extensive analytical and simulation results are provided to demonstrate the performance of the proposed algorithms in several aspects, such as network capacity, energy efficiency, link connectivity and so on

Cooperative positioning studies based on WLANs

Location information and location-based service have gained importance in recent years because, based on their concept, a new business market has been opened which encompass emergency services, security, monitoring, tracking, logistics, etc. Nowadays, the most developed positioning systems, namely the Global Navigation Satellite Systems (GNSS), are meant for outdoor use. In order to integrate outdoor and indoor localization in the same mobile application, several lines of research have been created for the purpose of investigating the possibility of wireless network technologies and of overcoming the challenges faced by GNSS in performing localization and navigation in indoor environments. The benefit in using wireless networks is that they provide a minimally invasive solution which is based on software algorithms that can be implemented and executed in the Mobile Station (MS) or in a Location Server connected to the network. This thesis focuses on the development of localization approaches based on Received Signal Strength (RSS) and applied in WLANs. Such approaches demonstrated in recent research advances that RSS-based localization algorithms are the simplest existing approaches due to the fact that the RSSs are most accessible existing measurements. RSS measurements can be used with two main algorithms, which are addressed in this thesis: Fingerprinting method (FP) and Pathloss method (PL). These two methods can be applied in both cooperative and non-cooperative algorithms. Such algorithms are evaluated here in terms of Root Mean Square Error (RMSE) for both simulated and real-field data