3,072 research outputs found
Sequential Circuit Design for Embedded Cryptographic Applications Resilient to Adversarial Faults
In the relatively young field of fault-tolerant cryptography, the main research effort has focused exclusively on the protection of the data path of cryptographic circuits. To date, however, we have not found any work that aims at protecting the control logic of these circuits against fault attacks, which thus remains the proverbial Achilles’ heel. Motivated by a hypothetical yet realistic fault analysis attack that, in principle, could be mounted against any modular exponentiation engine, even one with appropriate data path protection, we set out to close this remaining gap. In this paper, we present guidelines for the design of multifault-resilient sequential control logic based on standard Error-Detecting Codes (EDCs) with large minimum distance. We introduce a metric that measures the effectiveness of the error detection technique in terms of the effort the attacker has to make in relation to the area overhead spent in
implementing the EDC. Our comparison shows that the proposed EDC-based technique provides superior performance when compared against regular N-modular redundancy techniques. Furthermore, our technique scales well and does not affect the critical path delay
Null Convention Logic applications of asynchronous design in nanotechnology and cryptographic security
This dissertation presents two Null Convention Logic (NCL) applications of asynchronous logic circuit design in nanotechnology and cryptographic security. The first application is the Asynchronous Nanowire Reconfigurable Crossbar Architecture (ANRCA); the second one is an asynchronous S-Box design for cryptographic system against Side-Channel Attacks (SCA). The following are the contributions of the first application: 1) Proposed a diode- and resistor-based ANRCA (DR-ANRCA). Three configurable logic block (CLB) structures were designed to efficiently reconfigure a given DR-PGMB as one of the 27 arbitrary NCL threshold gates. A hierarchical architecture was also proposed to implement the higher level logic that requires a large number of DR-PGMBs, such as multiple-bit NCL registers. 2) Proposed a memristor look-up-table based ANRCA (MLUT-ANRCA). An equivalent circuit simulation model has been presented in VHDL and simulated in Quartus II. Meanwhile, the comparison between these two ANRCAs have been analyzed numerically. 3) Presented the defect-tolerance and repair strategies for both DR-ANRCA and MLUT-ANRCA. The following are the contributions of the second application: 1) Designed an NCL based S-Box for Advanced Encryption Standard (AES). Functional verification has been done using Modelsim and Field-Programmable Gate Array (FPGA). 2) Implemented two different power analysis attacks on both NCL S-Box and conventional synchronous S-Box. 3) Developed a novel approach based on stochastic logics to enhance the resistance against DPA and CPA attacks. The functionality of the proposed design has been verified using an 8-bit AES S-box design. The effects of decision weight, bitstream length, and input repetition times on error rates have been also studied. Experimental results shows that the proposed approach enhances the resistance to against the CPA attack by successfully protecting the hidden key --Abstract, page iii
A Network-based Asynchronous Architecture for Cryptographic Devices
Institute for Computing Systems ArchitectureThe traditional model of cryptography examines the security of the cipher as a
mathematical function. However, ciphers that are secure when specified as mathematical
functions are not necessarily secure in real-world implementations. The physical
implementations of ciphers can be extremely difficult to control and often leak socalled
side-channel information. Side-channel cryptanalysis attacks have shown to
be especially effective as a practical means for attacking implementations of cryptographic
algorithms on simple hardware platforms, such as smart-cards. Adversaries
can obtain sensitive information from side-channels, such as the timing of operations,
power consumption and electromagnetic emissions. Some of the attack techniques
require surprisingly little side-channel information to break some of the best known
ciphers. In constrained devices, such as smart-cards, straightforward implementations
of cryptographic algorithms can be broken with minimal work. Preventing these attacks
has become an active and a challenging area of research.
Power analysis is a successful cryptanalytic technique that extracts secret information
from cryptographic devices by analysing the power consumed during their operation.
A particularly dangerous class of power analysis, differential power analysis
(DPA), relies on the correlation of power consumption measurements. It has been proposed
that adding non-determinism to the execution of the cryptographic device would
reduce the danger of these attacks. It has also been demonstrated that asynchronous
logic has advantages for security-sensitive applications. This thesis investigates the
security and performance advantages of using a network-based asynchronous architecture,
in which the functional units of the datapath form a network. Non-deterministic
execution is achieved by exploiting concurrent execution of instructions both with and
without data-dependencies; and by forwarding register values between instructions
with data-dependencies using randomised routing over the network. The executions of
cryptographic algorithms on different architectural configurations are simulated, and
the obtained power traces are subjected to DPA attacks. The results show that the
proposed architecture introduces a level of non-determinism in the execution that significantly
raises the threshold for DPA attacks to succeed. In addition, the performance
analysis shows that the improved security does not degrade performance
MAFTIA Conceptual Model and Architecture
This document builds on the work reported in MAFTIA deliverable D1. It contains a refinement of the MAFTIA conceptual model and a discussion of the MAFTIA architecture. It also introduces the work done in WP6 on verification and assessment of security properties, which is reported on in more detail in MAFTIA deliverable D
Recommended from our members
On Multicast in Asynchronous Networks-on-Chip: Techniques, Architectures, and FPGA Implementation
In this era of exascale computing, conventional synchronous design techniques are facing unprecedented challenges. The consumer electronics market is replete with many-core systems in the range of 16 cores to thousands of cores on chip, integrating multi-billion transistors. However, with this ever increasing complexity, the traditional design approaches are facing key issues such as increasing chip power, process variability, aging, thermal problems, and scalability. An alternative paradigm that has gained significant interest in the last decade is asynchronous design. Asynchronous designs have several potential advantages: they are naturally energy proportional, burning power only when active, do not require complex clock distribution, are robust to different forms of variability, and provide ease of composability for heterogeneous platforms. Networks-on-chip (NoCs) is an interconnect paradigm that has been introduced to deal with the ever-increasing system complexity. NoCs provide a distributed, scalable, and efficient interconnect solution for today’s many-core systems. Moreover, NoCs are a natural match with asynchronous design techniques, as they separate communication infrastructure and timing from the computational elements. To this end, globally-asynchronous locally-synchronous (GALS) systems that interconnect multiple processing cores, operating at different clock speeds, using an asynchronous NoC, have gained significant interest. While asynchronous NoCs have several advantages, they also face a key challenge of supporting new types of traffic patterns. Once such pattern is multicast communication, where a source sends packets to arbitrary number of destinations. Multicast is not only common in parallel computing, such as for cache coherency, but also for emerging areas such as neuromorphic computing. This important capability has been largely missing from asynchronous NoCs. This thesis introduces several efficient multicast solutions for these interconnects. In particular, techniques, and network architectures are introduced to support high-performance and low-power multicast. Two leading network topologies are the focus: a variant mesh-of-trees (MoT) and a 2D mesh. In addition, for a more realistic implementation and analysis, as well as significantly advancing the field of asynchronous NoCs, this thesis also targets synthesis of these NoCs on commercial FPGAs. While there has been significant advances in FPGA technologies, there has been only limited research on implementing asynchronous NoCs on FPGAs. To this end, a systematic computeraided design (CAD) methodology has been introduced to efficiently and safely map asynchronous NoCs on FPGAs. Overall, this thesis makes the following three contributions. The first contribution is a multicast solution for a variant MoT network topology. This topology consists of simple low-radix switches, and has been used in high-performance computing platforms. A novel local speculation technique is introduced, where a subset of the network’s switches are speculative that always broadcast every packet. These switches are very simple and have high performance. Speculative switches are surrounded by non-speculative ones that route packets based on their destinations and also throttle any redundant copies created by the former. This hybrid network architecture achieved significant performance and power benefits over other multicast approaches. The second contribution is a multicast solution for a 2D-mesh topology, which is more complex with higher-radix switches and also is more commonly used. A novel continuous-time replication strategy is introduced to optimize the critical multi-way forking operation of a multicast transmission. In this technique, a multicast packet is first stored in an input port of a switch, from where it is sent through distinct output ports towards different destinations concurrently, at each output’s own rate and in continuous time. This strategy is shown to have significant latency and energy benefits over an approach that performs multicast using multiple distinct serial unicasts to each destination. Finally, a systematic CAD methodology is introduced to synthesize asynchronous NoCs on commercial FPGAs. A two-fold goal is targeted: correctness and high performance. For ease of implementation, only existing FPGA synthesis tools are used. Moreover, since asynchronous NoCs involve special asynchronous components, a comprehensive guide is introduced to map these elements correctly and efficiently. Two asynchronous NoC switches are synthesized using the proposed approach on a leading Xilinx FPGA in 28 nm: one that only handles unicast, and the other that also supports multicast. Both showed significant energy benefits with some performance gains over a state-of-the-art synchronous switch
Conceptual Model and Architecture of MAFTIA
This deliverable builds on the work reported in [MAFTIA 2000] and [Powell and Stroud 2001]. It contains a further refinement of the MAFTIA conceptual model and a revised discussion of the MAFTIA architecture. It also introduces the work done in MAFTIA on verification and assessment of security properties, which is reported on in more detail in [Adelsbach and Creese 2003
- …