Bacterial Foraging Optimized STATCOM for Stability Assessment in Power System

This paper presents a study of improvement in stability in a single machine connected to infinite bus (SMIB) power system by using static compensator (STATCOM). The gains of Proportional-Integral-Derivative (PID) controller in STATCOM are being optimized by heuristic technique based on Particle swarm optimization (PSO). Further, Bacterial Foraging Optimization (BFO) as an alternative heuristic method is also applied to select optimal gains of PID controller. The performance of STATCOM with the above soft-computing techniques are studied and compared with the conventional PID controller under various scenarios. The simulation results are accompanied with performance indices based quantitative analysis. The analysis clearly signifies the robustness of the new scheme in terms of stability and voltage regulation when compared with conventional PID

Bacterial Foraging Optimized STATCOM for Stability Assessment in Power System

This paper presents a study of improvement in stability in a single machine connected to infinite bus (SMIB) power system by using static compensator (STATCOM). The gains of Proportional-Integral-Derivative (PID) controller in STATCOM are being optimized by heuristic technique based on Particle swarm optimization (PSO). Further, Bacterial Foraging Optimization (BFO) as an alternative heuristic method is also applied to select optimal gains of PID controller. The performance of STATCOM with the above soft-computing techniques are studied and compared with the conventional PID controller under various scenarios. The simulation results are accompanied with performance indices based quantitative analysis. The analysis clearly signifies the robustness of the new scheme in terms of stability and voltage regulation when compared with conventional PID

A hybrid algorithm for voltage stability enhancement of distribution systems

This paper presents a hybrid algorithm by applying a hybrid firefly and particle swarm optimization algorithm (HFPSO) to determine the optimal sizing of distributed generation (DG) and distribution static compensator (D-STATCOM) device. A multi-objective function is employed to enhance the voltage stability, voltage profile, and minimize the total power loss of the radial distribution system (RDS). Firstly, the voltage stability index (VSI) is applied to locate the optimal location of DG and D-STATCOM respectively. Secondly, to overcome the sup-optimal operation of existing algorithms, the HFPSO algorithm is utilized to determine the optimal size of both DG and D-STATCOM. Verification of the proposed algorithm has achieved on the standard IEEE 33-bus and Iraqi 65-bus radial distribution systems through simulation using MATLAB. Comprehensive simulation results of four different cases show that the proposed HFPSO demonstrates significant improvements over other existing algorithms in supporting voltage stability and loss reduction in distribution networks. Furthermore, comparisons have achieved to demonstrate the superiority of HFPSO algorithms over other techniques due to its ability to determine the global optimum solution by easy way and speed converge feature

Performance Assessment of Pareto and Non-Pareto Approaches for the Optimal Allocation of DG and DSTATCOM in the Distribution System

This paper proposes a Differential Evolution (DE) optimization algorithm and a Pareto-frontier Multi-Objective Differential Evolution (MODE) optimization algorithm for the optimal allocation of Distributed Generation (DG) and Distribution Static Compensator (DSTATCOM) in a radial distribution system. It considers the minimization of active power dissipation, voltage drop and the annual cost as the objectives of this optimization problem. The proposed techniques are tested on an IEEE 33 bus radial distribution system. To compare the performance of the MODE and DE, the weighted sum approach is carried out. This helps to select one solution from the Pareto front of the MODE. Case studies show that the allocation of both DG and DSTATCOM results in a noticeable reduction of system losses, voltage drop and annual cost. Comparative studies also show that the global convergence characteristics of MODE are better than several other optimization algorithms

Study of Voltage Stability Using Intelligent Techniques

The continuous increase in the demand of active and reactive power in the power system network has limits as scope for network expansion many a times poses serious problems. The power system must be able to maintain acceptable voltage at all nodes in the system at a normal operating condition as well as post disturbance periods. Voltage instability is a serious issue in the system due to progressive and uncontrollable fall in voltage level. The research presented in this thesis is concerned with several facets of the voltage stability problem. The focus of this thesis is to improve the voltage stability of the system. The sensitivity analysis plays an important role as it monitors the nearness of the system towards the voltage collapse situation. The conventional offline data as well as the online data are processed to determine the weak areas are determined. As the system is having nonlinearities it is governed by differential and algebraic equations which are in turn solved by nonlinear techniques. In this work the system is analysed with steady state model. Once the system is represented in the form of differential equations and standard form is achieved advanced control techniques can be easily applied for its solution. The main focus of this thesis is aimed at placing FACTS device known as the Static compensator (STATCOM) at weak location of the system network to address the problem of voltage instability. With its unique capability to control reactive power flow in a transmission line as well as voltage at the bus where it is connected, this device significantly contribute to improve the power system. These features turn out to be even more prominent because STATCOM can allow loading of the transmission lines close to their thermal limits, forcing the power to flow through the desired paths. This opens up new avenues for the much needed flexibility in order to satisfy the demands. The voltage instability is improved with reactive power supports of optimal values at optimal locations. Also renewable energy sources offer better option than the conventional types and hence attempt has been made to include the wind energy for this study the wind generator is considered delivering constant output and is assumed as a substitute to the conventional power generators. Finally the system voltage stability is studied with design of a controller based on probabilistic neural network. The developed controller has provided much better performance under wide variations in the system loads and contingencies and shown a significant improvement in the static performance of the system. The proposed controller is tested under different scenarios of line outages and the load increase and found to be more effective than the existing ones. The research has revealed a veritable cornucopia of research opportunities, some of which are discussed in the thesis

Adaptive Control for Power System Voltage and Frequency Regulation

Variable and uncertain wind power output introduces new challenges to power system voltage and frequency stability. To guarantee the safe and stable operation of power systems, the control for voltage and frequency regulation is studied in this work. Static Synchronous Compensator (STATCOM) can provide fast and efficient reactive power support to regulate system voltage. In the literature, various STATCOM control methods have been discussed, including many applications of proportional–integral (PI) controllers. However, these previous works obtain the PI gains via a trial and error approach or extensive studies with a tradeoff of performance and applicability. Hence, control parameters for the optimal performance at a given operating point may not be effective at a different operating point. To improve the controller’s performance, this work proposes a new control model based on adaptive PI control, which can self-adjust the control gains during disturbance, such that the performance always matches a desired response in relation to operating condition changes. Further, a new method called the flatness-based adaptive control (FBAC), for STATCOM is also proposed. By this method, the nonlinear STATCOM variables can easily and exactly be controlled by controlling the flat output without solving differential equations. Further, the control gains can be dynamically tuned to satisfy the time-varying operation condition requirement. In addition to the voltage control, frequency control is also investigated in this work. Automatic generation control (AGC) is used to regulate the system frequency in power systems. Various control methods have been discussed in order to design control gains and obtain good frequency response performances. However, the control gains obtained by existing control methods are usually fixed and designed for specific scenarios in the studied power system. The desired response may not be obtained when variable wind power is integrated into power systems. To address these challenges, an adaptive gain-tuning control (AGTC) for AGC with effects of wind resources is presented in this dissertation. By AGTC, the PI control parameters can be automatically and dynamically calculated during the disturbance to make AGC consistently provide excellent performance under variable wind power. Simulation result verifies the advantages of the proposed control strategy

Enhancing radial distribution system performance by optimal placement of DSTATCOM

In this paper, A novel modified optimization method was used to find the optimal location and size for placing distribution Static Compensator in the radial distribution test feeder in order to improve its performance by minimizing the total power losses of the test feeder, enhancing the voltage profile and reducing the costs. The modified grey wolf optimization algorithm is used for the first time to solve this kind of optimization problem. An objective function was developed to study the radial distribution system included total power loss of the system and costs due to power loss in system. The proposed method is applied to two different test distribution feeders (33 bus and 69 bus test systems) using different Dstatcom sizes and the acquired results were analyzed and compared to other recent optimization methods applied to the same test feeders to ensure the effectiveness of the used method and its superiority over other recent optimization mehods. The major findings from obtained results that the applied technique found the most minimized total power loss in system ,the best improved voltage profile and most reduction in costs due power loss compared to other methods

Particle Swarm Optimization: Basic Concepts, Variants and Applications in Power Systems

Many areas in power systems require solving one or more nonlinear optimization problems. While analytical methods might suffer from slow convergence and the curse of dimensionality, heuristics-based swarm intelligence can be an efficient alternative. Particle swarm optimization (PSO), part of the swarm intelligence family, is known to effectively solve large-scale nonlinear optimization problems. This paper presents a detailed overview of the basic concepts of PSO and its variants. Also, it provides a comprehensive survey on the power system applications that have benefited from the powerful nature of PSO as an optimization technique. For each application, technical details that are required for applying PSO, such as its type, particle formulation (solution representation), and the most efficient fitness functions are also discussed

A review on economic and technical operation of active distribution systems

© 2019 Elsevier Ltd Along with the advent of restructuring in power systems, considerable integration of renewable energy resources has motivated the transition of traditional distribution networks (DNs) toward new active ones. In the meanwhile, rapid technology advances have provided great potentials for future bulk utilization of generation units as well as the energy storage (ES) systems in the distribution section. This paper aims to present a comprehensive review of recent advancements in the operation of active distribution systems (ADSs) from the viewpoint of operational time-hierarchy. To be more specific, this time-hierarchy consists of two stages, and at the first stage of this time-hierarchy, four major economic factors, by which the operation of traditional passive DNs is evolved to new active DNs, are described. Then the second stage of the time-hierarchy refers to technical management and power quality correction of ADSs in terms of static, dynamic and transient periods. In the end, some required modeling and control developments for the optimal operation of ADSs are discussed. As opposed to previous review papers, potential applications of devices in the ADS are investigated considering their operational time-intervals. Since some of the compensating devices, storage units and generating sources may have different applications regarding the time scale of their utilization, this paper considers real scenario system operations in which components of the network are firstly scheduled for the specified period ahead; then their deviations of operating status from reference points are modified during three time-intervals covering static, dynamic and transient periods