Mechanical properties of the concrete containing porcelain waste as sand

The demand of concrete have been increases on a daily bases which consume a lot of natural resource such as sand and gravel, there is an immediate need for finding suitable alternative which can be used to replace sand partially with another materials with high propor-tion . Ceramic waste is one of the strongest research areas that include the activity of replacement in all the sides of construction materi-als. This research aims to improve the performance of concrete using ceramic waste, and demonstrate the performance of mechanical properties to the concrete with partial replacement of sand by using waste porcelain. For these, we analyzed the mechanical properties of the concrete such as compressive strength, split tensile and flexural strength, the specimen were measured based on 10% ,20% ,30% ,40%, and 50% weight ratio of replace sand with waste porcelain at different time under water for 7 days , 28 days , 60 days . The optimum consideration were given to mechanical properties of the concrete, at different amount of ceramic waste as sand

Causative factors of construction and demolition waste generation in Iraq Construction Industry

The construction industry has hurt the environment from the waste generated during construction activities. Thus, it calls for serious measures to determine the causative factors of construction waste generated. There are limited studies on factors causing construction, and demolition (C&D) waste generation, and these limited studies only focused on the quantification of construction waste. This study took the opportunity to identify the causative factors for the C&D waste generation and also to determine the risk level of each causal factor, and the most important minimization methods to avoiding generating waste. This study was carried out based on the quantitative approach. A total of 39 factors that causes construction waste generation that has been identified from the literature review were considered which were then clustered into 4 groups. Improved questionnaire surveys by 38 construction experts (consultants, contractors and clients) during the pilot study. The actual survey was conducted with a total of 380 questionnaires, received with a response rate of 83.3%. Data analysis was performed using SPSS software. Ranking analysis using the mean score approach found the five most significant causative factors which are poor site management, poor planning, lack of experience, rework and poor controlling. The result also indicated that the majority of the identified factors having a high-risk level, in addition, the better minimization method is environmental awareness. A structural model was developed based on the 4 groups of causative factors using the Partial Least Squared-Structural Equation Modelling (PLS-SEM) technique. It was found that the model fits due to the goodness of fit (GOF ≥ 0.36= 0.658, substantial). Based on the outcome of this study, 39 factors were relevant to the generation of construction and demolition waste in Iraq. These groups of factors should be avoided during construction works to reduce the waste generated. The findings of this study are helpful to authorities and stakeholders in formulating laws and regulations. Furthermore, it provides opportunities for future researchers to conduct additional research’s on the factors that contribute to construction waste generation

Artificial neural network application in short-term prediction in an oscillating water column

Oscillating Water Column (OWC) is one type of promising wave energy devices due to its obvious advantage over many other wave energy converters: no moving component in sea water. Two types of OWCs (bottom-fixed and floating) have been widely investigated, and the bottom-fixed OWCs have been very successful in several practical applications. Recently, the proposal of massive wave energy production and the availability of wave energy have pushed OWC applications from near-shore to deeper water regions where floating OWCs are a better choice. For an OWC under sea waves, the air flow driving air turbine to generate electricity is a random process. In such a working condition, single design/operation point is nonexistent. To improve energy extraction, and to optimise the performance of the device, a system capable of controlling the air turbine rotation speed is desirable. To achieve that, this paper presents a short-term prediction of the random, process by an artificial neural network (ANN), which can provide near-future information for the control system. In this research, ANN is explored and tuned for a better prediction of the airflow (as well as the device motions for a wide application). It is found that, by carefully constructing ANN platform and optimizing the relevant parameters, ANN is capable of predicting the random process a few steps ahead of the real, time with a good accuracy. More importantly, the tuned ANN works for a large range of different types of random, process

Machine-Learning-Based Model for Hurricane Storm Surge Forecasting in the Lower Laguna Madre

During every Atlantic hurricane season, storms represent a constant risk to Texan coastal communities and other communities along the Atlantic coast of the United States. A storm surge refers to the abnormal rise of sea water level due to hurricanes and storms; traditionally, hurricane storm surge predictions are generated using complex numerical models that require high amounts of computing power to be run, which grow proportionally with the extent of the area covered by the model. In this work, a machine-learning-based storm surge forecasting model for the Lower Laguna Madre is implemented. The model considers gridded forecasted weather data on winds and atmospheric pressure over the Gulf of Mexico, as well as previous sea levels obtained from a Laguna Madre ocean circulation numerical model. Using architectures such as Convolutional Neural Networks (CNN) and Long Short-Term Memory (LSTM) combined, the resulting model is capable of identifying upcoming hurricanes and predicting storm surges, as well as normal conditions in several locations along the Lower Laguna Madre. Overall, the model is able to predict storm surge peaks with an average difference of 0.04 m when compared with a numerical model and an average RMSE of 0.08 for normal conditions and 0.09 for storm surge conditions

Artificial neural network-based storm surge forecast model: Practical application to Sakai Minato, Japan

The present study describes a novel way of a systematic and objective selection procedure for the development of an Artificial Neural Network-based storm Surge Forecast Model (ANN-SFM) with the 5, 12 and 24 h-lead times and its application to Sakai Minato area on the Tottori coast, Japan. The selection procedure guides how to determine the superiority of the best performing model in terms of the appropriate combination of unit number in the hidden layer and parameter in the input layer. In the application of ANN-SFM to Sakai Minato, it is found that the best 5 and 12 h-forecast ANN-SFMs are established with the most suitable set of 70 units (the number of hidden neurons) and the input components of surge level, sea level pressure, the depression rate of sea level pressure, longitude, latitude, central atmospheric pressure and highest wind speed. The best 24 h-forecast ANN-SFM is determined with 160 units and the input parameters of surge level, sea level pressure, the depression rate of sea level pressure, longitude and latitude. The proposed method of the selection procedure is able to be adaptable to other coastal locations for the development of the artificial neural network-based storm surge forecast model as establishing the superiority of the most relevant set combining unit numbers and input parameters

Corporation robots

Nowadays, various robots are built to perform multiple tasks. Multiple robots working together to perform a single task becomes important. One of the key elements for multiple robots to work together is the robot need to able to follow another robot. This project is mainly concerned on the design and construction of the robots that can follow line. In this project, focuses on building line following robots leader and slave. Both of these robots will follow the line and carry load. A Single robot has a limitation on handle load capacity such as cannot handle heavy load and cannot handle long size load. To overcome this limitation an easier way is to have a groups of mobile robots working together to accomplish an aim that no single robot can do alon

Neural network approach to sea-level modeling case study of a storm surge in the gulf of trieste in early december 2008

Tide tables can be a useful tool for sea-level forecasting in many areas. Slovenian operational\ud service for hydrological forecasts at the Environmental Agency of the Republic of Slovenia\ud frequently deploys tide tables alongside least square harmonic analysis to predict maximum sea\ud levels in the Gulf of Trieste. Meteorological influences such as pressure gradient, wind stress and\ud induced basin eigenoscillations (seiches) along the main axis of the Adriatic basin have repeatedly\ud been proven as important factors influencing the sea level in the Gulf of Trieste. They are, however,\ud only indirectly included in the harmonic analysis which in itself requires a large number of\ud carefully tuned model parameters in order to make useful short-range forecasts. A number of recent\ud reports show that an artificial neural network (ANN) can greatly improve sea level forecasts,\ud providing we supply it with suitable input variables (ie. previous water levels, air pressure, wind\ud speed, wind direction, tide charts etc.) We report on an ANN-based analysis of the recent storm\ud surge and flooding events at the Slovenian coast in the beginning of December 2008. The ANN\ud model compares favourably with the currently used conventional forecasting methods.\u

A survey on tidal analysis and forecasting methods for Tsunami detection

Accurate analysis and forecasting of tidal level are very important tasks for human activities in oceanic and coastal areas. They can be crucial in catastrophic situations like occurrences of Tsunamis in order to provide a rapid alerting to the human population involved and to save lives. Conventional tidal forecasting methods are based on harmonic analysis using the least squares method to determine harmonic parameters. However, a large number of parameters and long-term measured data are required for precise tidal level predictions with harmonic analysis. Furthermore, traditional harmonic methods rely on models based on the analysis of astronomical components and they can be inadequate when the contribution of non-astronomical components, such as the weather, is significant. Other alternative approaches have been developed in the literature in order to deal with these situations and provide predictions with the desired accuracy, with respect also to the length of the available tidal record. These methods include standard high or band pass filtering techniques, although the relatively deterministic character and large amplitude of tidal signals make special techniques, like artificial neural networks and wavelets transform analysis methods, more effective. This paper is intended to provide the communities of both researchers and practitioners with a broadly applicable, up to date coverage of tidal analysis and forecasting methodologies that have proven to be successful in a variety of circumstances, and that hold particular promise for success in the future. Classical and novel methods are reviewed in a systematic and consistent way, outlining their main concepts and components, similarities and differences, advantages and disadvantages