Efficient resources assignment schemes for clustered multithreaded processors

New feature sizes provide larger number of transistors per chip that architects could use in order to further exploit instruction level parallelism. However, these technologies bring also new challenges that complicate conventional monolithic processor designs. On the one hand, exploiting instruction level parallelism is leading us to diminishing returns and therefore exploiting other sources of parallelism like thread level parallelism is needed in order to keep raising performance with a reasonable hardware complexity. On the other hand, clustering architectures have been widely studied in order to reduce the inherent complexity of current monolithic processors. This paper studies the synergies and trade-offs between two concepts, clustering and simultaneous multithreading (SMT), in order to understand the reasons why conventional SMT resource assignment schemes are not so effective in clustered processors. These trade-offs are used to propose a novel resource assignment scheme that gets and average speed up of 17.6% versus Icount improving fairness in 24%.Peer ReviewedPostprint (published version

Maximizing multithreaded multicore architectures through thread migrations

Heterogeneity in general-purpose workloads often end up in non optimal per-thread hardware resource usage. The current trend towards multicore architectures, containing several multithreaded cores, increases the need of a complexity-effective way to expose the heterogeneity in general-purpose workloads to the underlying hardware, in order to obtain all the potential performance of these architectures. In this paper we present the Heterogeneity-Aware Dynamic Thread Migrator (hDTM), a novel complexity-effective hardware mechanism that exposes the heterogeneity in software to the hardware, also enabling the hardware to react to the dynamic behavior variations in the running applications. By means of core-to-core thread migrations, the hDTM mechanism strives to perform the desired behavior transparently to the Operating System. As an example of the general-purpose hDTM concept presented in this paper, we describe a naive hDTM implementation for a Power5-like processor and provide results on the benefits of the proposed mechanism. Our results indicate that even this simple hDTM implementation is able to get close to hDTM’s goal, not only avoiding losses due to bad thread-to-core assignments (up to a 25%) but also going beyond the best static thread-to-core assignment upper limit.Postprint (published version

Improving multithreading performance for clustered VLIW architectures.

Very Long Instruction Word (VLIW) processors are very popular in embedded and mobile computing domain. Use of VLIW processors range from Digital Signal Processors (DSPs) found in a plethora of communication and multimedia devices to Graphics Processing Units (GPUs) used in gaming and high performance computing devices. The advantage of VLIWs is their low complexity and low power design which enable high performance at a low cost. Scalability of VLIWs is limited by the scalability of register file ports. It is not viable to have a VLIW processor with a single large register file because of area and power consumption implications of the register file. Clustered VLIW solve the register file scalability issue by partitioning the register file into multiple clusters and a set of functional units that are attached to register file of that cluster. Using a clustered approach, higher issue width can be achieved while keeping the cost of register file within reasonable limits. Several commercial VLIW processors have been designed using the clustered VLIW model. VLIW processors can be used to run a larger set of applications. Many of these applications have a good Lnstruction Level Parallelism (ILP) which can be efficiently utilized. However, several applications, specially the ones that are control code dominated do not exibit good ILP and the processor is underutilized. Cache misses is another major source of resource underutiliztion. Multithreading is a popular technique to improve processor utilization. Interleaved MultiThreading (IMT) hides cache miss latencies by scheduling a different thread each cycle but cannot hide unused instructions slots. Simultaneous MultiThread (SMT) can also remove ILP under-utilization by issuing multiple threads to fill the empty instruction slots. However, SMT has a higher implementation cost than IMT. The thesis presents Cluster-level Simultaneous MultiThreading (CSMT) that supports a limited form of SMT where VLIW instructions from different threads are merged at a cluster-level granularity. This lowers the hardware implementation cost to a level comparable to the cheap IMT technique. The more complex SMT combines VLIW instructions at the individual operation-level granularity which is quite expensive especially in for a mobile solution. We refer to SMT at operation-level as OpSMT to reduce ambiguity. While previous studies restricted OpSMT on a VLIW to 2 threads, CSMT has a better scalability and upto 8 threads can be supported at a reasonable cost. The thesis proposes several other techniques to further improve CSMT performance. In particular, Cluster renaming remaps the clusters used by instructions of different threads to reduce resource conflicts. Cluster renaming is quite effective in reducing the issue-slots under-utilization and significantly improves CSMT performance.The thesis also proposes: a hybrid between IMT and CSMT which increases the number of supported threads, heterogeneous instruction merging where some instructions are combined using SMT and CSMT rest, and finally, split-issue, a technique that allows to launch partially an instruction making it easier to be combined with others

Late allocation and early release of physical registers

The register file is one of the critical components of current processors in terms of access time and power consumption. Among other things, the potential to exploit instruction-level parallelism is closely related to the size and number of ports of the register file. In conventional register renaming schemes, both register allocation and releasing are conservatively done, the former at the rename stage, before registers are loaded with values, and the latter at the commit stage of the instruction redefining the same register, once registers are not used any more. We introduce VP-LAER, a renaming scheme that allocates registers later and releases them earlier than conventional schemes. Specifically, physical registers are allocated at the end of the execution stage and released as soon as the processor realizes that there will be no further use of them. VP-LAER enhances register utilization, that is, the fraction of allocated registers having a value to be read in the future. Detailed cycle-level simulations show either a significant speedup for a given register file size or a reduction in the register file size for a given performance level, especially for floating-point codes, where the register file pressure is usually high.Peer ReviewedPostprint (published version

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application.Postprint (published version

Hardware-based generation of independent subtraces of instructions in clustered processors

© 2013 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Multicore chips are currently dominating the microprocessor market as designs that improve performance and sustain power consumption. However, complex core features must be still considered to provide good performance for existing sequential applications. An effective approach to reduce core complexity without dramatically sacrificing performance is to distribute critical processor structures by using clustered microarchitectures. In these designs, communication latency among clusters is a critical performance bottleneck, and a good steering algorithm is required to reduce intercluster communication. In this paper, we propose a new energy-efficient microarchitectural approach that reduces intercluster communication by detecting and generating independent chains of instructions, referred to as subtraces, from the execution of sequential programs. The devised mechanism has been modeled on an x86-based trace-cache processor, where subtraces are built in the fill unit, stored in a trace cache, and individually steered to different clusters. Experimental results show that the proposal reaches performance speedups around 7 and 15 percent for point-to-point and bus-based interconnects, respectively, while achieving energy savings of up to 12 percent.This work was supported by the Spanish MICINN, Consolider Programme, and Plan E funds, as well as European Commission FEDER funds, under Grants CSD2006-00046 and TIN2009-14475-C04-01.Ubal Tena, R.; Sahuquillo Borrás, J.; Petit Martí, SV.; López Rodríguez, PJ.; Duato Marín, JF. (2013). Hardware-based generation of independent subtraces of instructions in clustered processors. IEEE Transactions on Computers. 62(5):944-955. https://doi.org/10.1109/TC.2012.42S94495562

ParaKMeans: Implementation of a parallelized K-means algorithm suitable for general laboratory use

<p>Abstract</p> <p>Background</p> <p>During the last decade, the use of microarrays to assess the transcriptome of many biological systems has generated an enormous amount of data. A common technique used to organize and analyze microarray data is to perform cluster analysis. While many clustering algorithms have been developed, they all suffer a significant decrease in computational performance as the size of the dataset being analyzed becomes very large. For example, clustering 10000 genes from an experiment containing 200 microarrays can be quite time consuming and challenging on a desktop PC. One solution to the scalability problem of clustering algorithms is to distribute or parallelize the algorithm across multiple computers.</p> <p>Results</p> <p>The software described in this paper is a high performance multithreaded application that implements a parallelized version of the K-means Clustering algorithm. Most parallel processing applications are not accessible to the general public and require specialized software libraries (e.g. MPI) and specialized hardware configurations. The parallel nature of the application comes from the use of a web service to perform the distance calculations and cluster assignments. Here we show our parallel implementation provides significant performance gains over a wide range of datasets using as little as seven nodes. The software was written in C# and was designed in a modular fashion to provide both deployment flexibility as well as flexibility in the user interface.</p> <p>Conclusion</p> <p>ParaKMeans was designed to provide the general scientific community with an easy and manageable client-server application that can be installed on a wide variety of Windows operating systems.</p