A programmable BIST architecture for clusters of Multiple-Port SRAMs

This paper presents a BIST architecture, based on a single microprogrammable BIST processor and a set of memory wrappers, designed to simplify the test of a system containing many distributed multi-port SRAMs of different sizes (number of bits, number of words), access protocol (asynchronous, synchronous), and timin

Infrastructures and Algorithms for Testable and Dependable Systems-on-a-Chip

Every new node of semiconductor technologies provides further miniaturization and higher performances, increasing the number of advanced functions that electronic products can offer. Silicon area is now so cheap that industries can integrate in a single chip usually referred to as System-on-Chip (SoC), all the components and functions that historically were placed on a hardware board. Although adding such advanced functionality can benefit users, the manufacturing process is becoming finer and denser, making chips more susceptible to defects. Today’s very deep-submicron semiconductor technologies (0.13 micron and below) have reached susceptibility levels that put conventional semiconductor manufacturing at an impasse. Being able to rapidly develop, manufacture, test, diagnose and verify such complex new chips and products is crucial for the continued success of our economy at-large. This trend is expected to continue at least for the next ten years making possible the design and production of 100 million transistor chips. To speed up the research, the National Technology Roadmap for Semiconductors identified in 1997 a number of major hurdles to be overcome. Some of these hurdles are related to test and dependability. Test is one of the most critical tasks in the semiconductor production process where Integrated Circuits (ICs) are tested several times starting from the wafer probing to the end of production test. Test is not only necessary to assure fault free devices but it also plays a key role in analyzing defects in the manufacturing process. This last point has high relevance since increasing time-to-market pressure on semiconductor fabrication often forces foundries to start volume production on a given semiconductor technology node before reaching the defect densities, and hence yield levels, traditionally obtained at that stage. The feedback derived from test is the only way to analyze and isolate many of the defects in today’s processes and to increase process’s yield. With the increasing need of high quality electronic products, at each new physical assembly level, such as board and system assembly, test is used for debugging, diagnosing and repairing the sub-assemblies in their new environment. Similarly, the increasing reliability, availability and serviceability requirements, lead the users of high-end products performing periodic tests in the field throughout the full life cycle. To allow advancements in each one of the above scaling trends, fundamental changes are expected to emerge in different Integrated Circuits (ICs) realization disciplines such as IC design, packaging and silicon process. These changes have a direct impact on test methods, tools and equipment. Conventional test equipment and methodologies will be inadequate to assure high quality levels. On chip specialized block dedicated to test, usually referred to as Infrastructure IP (Intellectual Property), need to be developed and included in the new complex designs to assure that new chips will be adequately tested, diagnosed, measured, debugged and even sometimes repaired. In this thesis, some of the scaling trends in designing new complex SoCs will be analyzed one at a time, observing their implications on test and identifying the key hurdles/challenges to be addressed. The goal of the remaining of the thesis is the presentation of possible solutions. It is not sufficient to address just one of the challenges; all must be met at the same time to fulfill the market requirements

Testing Embedded Memories in Telecommunication Systems

Extensive system testing is mandatory nowadays to achieve high product quality. Telecommunication systems are particularly sensitive to such a requirement; to maintain market competitiveness, manufacturers need to combine reduced costs, shorter life cycles, advanced technologies, and high quality. Moreover, strict reliability constraints usually impose very low fault latencies and a high degree of fault detection for both permanent and transient faults. This article analyzes major problems related to testing complex telecommunication systems, with particular emphasis on their memory modules, often so critical from the reliability point of view. In particular, advanced BIST-based solutions are analyzed, and two significant industrial case studies presente

Ultra-Low-Power Embedded SRAM Design for Battery- Operated and Energy-Harvested IoT Applications

Internet of Things (IoT) devices such as wearable health monitors, augmented reality goggles, home automation, smart appliances, etc. are a trending topic of research. Various IoT products are thriving in the current electronics market. The IoT application needs such as portability, form factor, weight, etc. dictate the features of such devices. Small, portable, and lightweight IoT devices limit the usage of the primary energy source to a smaller rechargeable or non-rechargeable battery. As battery life and replacement time are critical issues in battery-operated or partially energy-harvested IoT devices, ultra-low-power (ULP) system on chips (SoC) are becoming a widespread solution of chip makers’ choice. Such ULP SoC requires both logic and the embedded static random access memory (SRAM) in the processor to operate at very low supply voltages. With technology scaling for bulk and FinFET devices, logic has demonstrated to operate at low minimum operating voltages (VMIN). However, due to process and temperature variation, SRAMs have higher VMIN in scaled processes that become a huge problem in designing ULP SoC cores. This chapter discusses the latest published circuits and architecture techniques to minimize the SRAM VMIN for scaled bulk and FinFET technologies and improve battery life for ULP IoT applications

A Unique March Test Algorithm for the Wide Spread of Realistic Memory Faults in SRAMs

Among the different types of algorithms proposed to test static random access memories (SRAMs), march tests have proven to be faster, simpler and regularly structured. A large number of march tests with different fault coverage have been published. Usually different march tests detect only a specific set of memory faults. The always growing memory production technology introduces new classes of fault, making a key hurdle the generation of new march tests. The aim of this paper is to target the whole set of realistic fault model and to provide a unique march test able to reduce the test complexity of 15.4% than state-of-the-art march algorith

Online and Offline BIST in IP-Core Design

This article presents an online and offline built-in self-test architecture implemented as an SRAM intellectual-property core for telecommunication applications. The architecture combines fault-latency reduction, code-based fault detection, and architecture-based fault avoidance to meet reliability constraint

A Low-Cost FPGA-Based Test and Diagnosis Architecture for SRAMs

The continues improvement of manufacturing technologies allows the realization of integrated circuits containing an ever increasing number of transistors. A major part of these devices is devoted to realize SRAM blocks. Test and diagnosis of SRAM circuits are therefore an important challenge for improving quality of next generation integrated circuits. This paper proposes a flexible platform for testing and diagnosis of SRAM circuits. The architecture is based on the use of a low cost FPGA based board allowing high diagnosability while keeping costs at a very low leve

Efficient Built In Self Repair Strategy for Embedded SRAM with selecteble redundancy

Built-in self -test (BIST) refers to those testing techniques where additional hardware is added to a design so that testing is accomplished without the aid of external hardware. Usually, a pseudo-random generator is used to apply test vectors to the circuit under test and a data compactor is used to produce a signature. To increase the reliability and yield of embedded memories, many redundancy mechanisms have been proposed. All the redundancy mechanisms bring penalty of area and complexity to embedded memories design. Considered that compiler is used to configure SRAM for different needs, the BISR had better bring no change to other modules in SRAM. To solve the problem, a new redundancy scheme is proposed in this paper. Some normal words in embedded memories can be selected as redundancy instead of adding spare words, spare rows, spare columns or spare blocks. Built-In Self-Repair (BISR) with Redundancy is an effective yield-enhancement strategy for embedded memories. This paper proposes an efficient BISR strategy which consists of a Built-In Self-Test (BIST) module, a Built-In Address-Analysis (BIAA) module and a Multiplexer (MUX) module. The BISR is designed flexible that it can provide four operation modes to SRAM users. Each fault address can be saved only once is the feature of the proposed BISR strategy. In BIAA module, fault addresses and redundant ones form a one- to- one mapping to achieve a high repair speed. Besides, instead of adding spare words, rows, columns or blocks in the SRAMs, users can select normal words as redundancy

Integration of a Digital Built-in Self-Test for On-Chip Memories

The ability of testing on-chip circuitry is extremely essential to ASIC implemen- tations today. However, providing functional tests and verification for on-chip (embedded) memories always poses a huge number of challenges to the designer. Therefore, a co-existing automated built-in self-test block with the Design Under Test (DUT) seems crucial to provide comprehensive, efficient and robust testing features. The target DUT of this thesis project is the state-of-the-arts Ultra Low Power (ULP) dual-port SRAMs designed in ASIC group of EIT department at Lund University. This thesis starts from system RTL modeling and verification from an earlier project, and then goes through ASIC design phase in 28 nm FD-SOI technology from ST-Microelectronics. All scripts during the ASIC design phase are developed in TCL. This design is implemented with multiple power domains (using CPF approach and introducing level-shifters at crossing-points between domains) and multiple clock sources in order to make it possible to perform various measurements with a high reliability on different flavours of a dual-port SRAM.This design is able to reduce dramatically the complexity of verification and measurement to integrated memories. This digital integrated circuit (IC) is developed as an application-specific IC (ASIC) chip for functional verification of integrated memories and measuring them in different aspects such as power consumption. The design is automated and capable of being reconfigured easily in terms of required actions and data for testing on-chip memories. Put it in other words, this design has automated and optimized the generation of what data to be stored on which location on memories as well as how they have been treated and interpreted later on. For instance, it refreshes and delivers different operation modes and working patterns to the entire test system in order to fully utilize integrated memories, of which such an automation is instructed by the stimuli to the chip. Besides, the pattern generation of the stimuli is implemented on MATLAB in an automated way. Due to constant advancements in chip manufacturing technology, more devices are squeezed into the same silicon area. Meaning that in order to monitor more internal signals introduced by the increased complexity of the circuits, more dedicated input/output ports (the physical interface between the chip internal signals and outside world) are required, that makes the chip bonding and testing in the future difficult and time-consuming. Additionally, memories usually have a bigger number of pins for signal reactions than other circuit blocks do, the method of dealing with so many pins should also be taken into account. Thus, a few techniques are adopted in this system to assist the designers deal with all mentioned issues. Once the ASIC chip has been fabricated (manufactured) and bonded, the on-chip memories can be tested directly on a printed circuit board in a simple and flexible way: Once test instruction input is loaded into the chip, the system starts to update the system settings and then to generate the internal configurations(parameters) so that all different operations, modes or instructions related to memory testing are automatically processed